drivers/mmc/s3c_sdi.c - github/trini/u-boot - Gitiles

 /*
  * S3C24xx SD/MMC driver
  *
  * Based on OpenMoko S3C24xx driver by Harald Welte <laforge@openmoko.org>
  *
  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <malloc.h>
 #include <mmc.h>
 #include <errno.h>
 #include <asm/arch/s3c24x0_cpu.h>
 #include <asm/io.h>
 #include <asm/unaligned.h>

 #define S3C2440_SDICON_SDRESET		(1 << 8)
 #define S3C2410_SDICON_FIFORESET	(1 << 1)
 #define S3C2410_SDICON_CLOCKTYPE	(1 << 0)

 #define S3C2410_SDICMDCON_LONGRSP	(1 << 10)
 #define S3C2410_SDICMDCON_WAITRSP	(1 << 9)
 #define S3C2410_SDICMDCON_CMDSTART	(1 << 8)
 #define S3C2410_SDICMDCON_SENDERHOST	(1 << 6)
 #define S3C2410_SDICMDCON_INDEX		0x3f

 #define S3C2410_SDICMDSTAT_CRCFAIL	(1 << 12)
 #define S3C2410_SDICMDSTAT_CMDSENT	(1 << 11)
 #define S3C2410_SDICMDSTAT_CMDTIMEOUT	(1 << 10)
 #define S3C2410_SDICMDSTAT_RSPFIN	(1 << 9)

 #define S3C2440_SDIDCON_DS_WORD		(2 << 22)
 #define S3C2410_SDIDCON_TXAFTERRESP	(1 << 20)
 #define S3C2410_SDIDCON_RXAFTERCMD	(1 << 19)
 #define S3C2410_SDIDCON_BLOCKMODE	(1 << 17)
 #define S3C2410_SDIDCON_WIDEBUS		(1 << 16)
 #define S3C2440_SDIDCON_DATSTART	(1 << 14)
 #define S3C2410_SDIDCON_XFER_RXSTART	(2 << 12)
 #define S3C2410_SDIDCON_XFER_TXSTART	(3 << 12)
 #define S3C2410_SDIDCON_BLKNUM		0x7ff

 #define S3C2410_SDIDSTA_FIFOFAIL	(1 << 8)
 #define S3C2410_SDIDSTA_CRCFAIL		(1 << 7)
 #define S3C2410_SDIDSTA_RXCRCFAIL	(1 << 6)
 #define S3C2410_SDIDSTA_DATATIMEOUT	(1 << 5)
 #define S3C2410_SDIDSTA_XFERFINISH	(1 << 4)

 #define S3C2410_SDIFSTA_TFHALF		(1 << 11)
 #define S3C2410_SDIFSTA_COUNTMASK	0x7f

 /*
  * WARNING: We only support one SD IP block.
  * NOTE: It's not likely there will ever exist an S3C24xx with two,
  *       at least not in this universe all right.
  */
 static int wide_bus;

 static int
 s3cmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 {
 	struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
 	uint32_t sdiccon, sdicsta, sdidcon, sdidsta, sdidat, sdifsta;
 	uint32_t sdicsta_wait_bit = S3C2410_SDICMDSTAT_CMDSENT;
 	unsigned int timeout = 100000;
 	int ret = 0, xfer_len, data_offset = 0;
 	const uint32_t sdidsta_err_mask = S3C2410_SDIDSTA_FIFOFAIL |
 		S3C2410_SDIDSTA_CRCFAIL | S3C2410_SDIDSTA_RXCRCFAIL |
 		S3C2410_SDIDSTA_DATATIMEOUT;


 	writel(0xffffffff, &sdi_regs->sdicsta);
 	writel(0xffffffff, &sdi_regs->sdidsta);
 	writel(0xffffffff, &sdi_regs->sdifsta);

 	/* Set up data transfer (if applicable). */
 	if (data) {
 		writel(data->blocksize, &sdi_regs->sdibsize);

 		sdidcon = data->blocks & S3C2410_SDIDCON_BLKNUM;
 		sdidcon |= S3C2410_SDIDCON_BLOCKMODE;
 #if defined(CONFIG_S3C2440)
 		sdidcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART;
 #endif
 		if (wide_bus)
 			sdidcon |= S3C2410_SDIDCON_WIDEBUS;

 		if (data->flags & MMC_DATA_READ) {
 			sdidcon |= S3C2410_SDIDCON_RXAFTERCMD;
 			sdidcon |= S3C2410_SDIDCON_XFER_RXSTART;
 		} else {
 			sdidcon |= S3C2410_SDIDCON_TXAFTERRESP;
 			sdidcon |= S3C2410_SDIDCON_XFER_TXSTART;
 		}

 		writel(sdidcon, &sdi_regs->sdidcon);
 	}

 	/* Write CMD arg. */
 	writel(cmd->cmdarg, &sdi_regs->sdicarg);

 	/* Write CMD index. */
 	sdiccon = cmd->cmdidx & S3C2410_SDICMDCON_INDEX;
 	sdiccon |= S3C2410_SDICMDCON_SENDERHOST;
 	sdiccon |= S3C2410_SDICMDCON_CMDSTART;

 	/* Command with short response. */
 	if (cmd->resp_type & MMC_RSP_PRESENT) {
 		sdiccon |= S3C2410_SDICMDCON_WAITRSP;
 		sdicsta_wait_bit = S3C2410_SDICMDSTAT_RSPFIN;
 	}

 	/* Command with long response. */
 	if (cmd->resp_type & MMC_RSP_136)
 		sdiccon |= S3C2410_SDICMDCON_LONGRSP;

 	/* Start the command. */
 	writel(sdiccon, &sdi_regs->sdiccon);

 	/* Wait for the command to complete or for response. */
 	for (timeout = 100000; timeout; timeout--) {
 		sdicsta = readl(&sdi_regs->sdicsta);
 		if (sdicsta & sdicsta_wait_bit)
 			break;

 		if (sdicsta & S3C2410_SDICMDSTAT_CMDTIMEOUT)
 			timeout = 1;
 	}

 	/* Clean the status bits. */
 	setbits_le32(&sdi_regs->sdicsta, 0xf << 9);

 	if (!timeout) {
 		puts("S3C SDI: Command timed out!\n");
 		ret = TIMEOUT;
 		goto error;
 	}

 	/* Read out the response. */
 	if (cmd->resp_type & MMC_RSP_136) {
 		cmd->response[0] = readl(&sdi_regs->sdirsp0);
 		cmd->response[1] = readl(&sdi_regs->sdirsp1);
 		cmd->response[2] = readl(&sdi_regs->sdirsp2);
 		cmd->response[3] = readl(&sdi_regs->sdirsp3);
 	} else {
 		cmd->response[0] = readl(&sdi_regs->sdirsp0);
 	}

 	/* If there are no data, we're done. */
 	if (!data)
 		return 0;

 	xfer_len = data->blocksize * data->blocks;

 	while (xfer_len > 0) {
 		sdidsta = readl(&sdi_regs->sdidsta);
 		sdifsta = readl(&sdi_regs->sdifsta);

 		if (sdidsta & sdidsta_err_mask) {
 			printf("S3C SDI: Data error (sdta=0x%08x)\n", sdidsta);
 			ret = -EIO;
 			goto error;
 		}

 		if (data->flags & MMC_DATA_READ) {
 			if ((sdifsta & S3C2410_SDIFSTA_COUNTMASK) < 4)
 				continue;
 			sdidat = readl(&sdi_regs->sdidat);
 			put_unaligned_le32(sdidat, data->dest + data_offset);
 		} else {	/* Write */
 			/* TX FIFO half full. */
 			if (!(sdifsta & S3C2410_SDIFSTA_TFHALF))
 				continue;

 			/* TX FIFO is below 32b full, write. */
 			sdidat = get_unaligned_le32(data->src + data_offset);
 			writel(sdidat, &sdi_regs->sdidat);
 		}
 		data_offset += 4;
 		xfer_len -= 4;
 	}

 	/* Wait for the command to complete or for response. */
 	for (timeout = 100000; timeout; timeout--) {
 		sdidsta = readl(&sdi_regs->sdidsta);
 		if (sdidsta & S3C2410_SDIDSTA_XFERFINISH)
 			break;

 		if (sdidsta & S3C2410_SDIDSTA_DATATIMEOUT)
 			timeout = 1;
 	}

 	/* Clear status bits. */
 	writel(0x6f8, &sdi_regs->sdidsta);

 	if (!timeout) {
 		puts("S3C SDI: Command timed out!\n");
 		ret = TIMEOUT;
 		goto error;
 	}

 	writel(0, &sdi_regs->sdidcon);

 	return 0;
 error:
 	return ret;
 }

 static void s3cmmc_set_ios(struct mmc *mmc)
 {
 	struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
 	uint32_t divider = 0;

 	wide_bus = (mmc->bus_width == 4);

 	if (!mmc->clock)
 		return;

 	divider = DIV_ROUND_UP(get_PCLK(), mmc->clock);
 	if (divider)
 		divider--;

 	writel(divider, &sdi_regs->sdipre);
 	mdelay(125);
 }

 static int s3cmmc_init(struct mmc *mmc)
 {
 	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
 	struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();

 	/* Start the clock. */
 	setbits_le32(&clk_power->clkcon, 1 << 9);

 #if defined(CONFIG_S3C2440)
 	writel(S3C2440_SDICON_SDRESET, &sdi_regs->sdicon);
 	mdelay(10);
 	writel(0x7fffff, &sdi_regs->sdidtimer);
 #else
 	writel(0xffff, &sdi_regs->sdidtimer);
 #endif
 	writel(MMC_MAX_BLOCK_LEN, &sdi_regs->sdibsize);
 	writel(0x0, &sdi_regs->sdiimsk);

 	writel(S3C2410_SDICON_FIFORESET | S3C2410_SDICON_CLOCKTYPE,
 	       &sdi_regs->sdicon);

 	mdelay(125);

 	return 0;
 }

 struct s3cmmc_priv {
 	struct mmc_config	cfg;
 	int (*getcd)(struct mmc *);
 	int (*getwp)(struct mmc *);
 };

 static int s3cmmc_getcd(struct mmc *mmc)
 {
 	struct s3cmmc_priv *priv = mmc->priv;
 	if (priv->getcd)
 		return priv->getcd(mmc);
 	else
 		return 0;
 }

 static int s3cmmc_getwp(struct mmc *mmc)
 {
 	struct s3cmmc_priv *priv = mmc->priv;
 	if (priv->getwp)
 		return priv->getwp(mmc);
 	else
 		return 0;
 }

 static const struct mmc_ops s3cmmc_ops = {
 	.send_cmd	= s3cmmc_send_cmd,
 	.set_ios	= s3cmmc_set_ios,
 	.init		= s3cmmc_init,
 	.getcd		= s3cmmc_getcd,
 	.getwp		= s3cmmc_getwp,
 };

 int s3cmmc_initialize(bd_t *bis, int (*getcd)(struct mmc *),
 		      int (*getwp)(struct mmc *))
 {
 	struct s3cmmc_priv	*priv;
 	struct mmc		*mmc;
 	struct mmc_config	*cfg;

 	priv = calloc(1, sizeof(*priv));
 	if (!priv)
 		return -ENOMEM;
 	cfg = &priv->cfg;

 	cfg->name = "S3C MMC";
 	cfg->ops = &s3cmmc_ops;
 	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 	cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_HS;
 	cfg->f_min = 400000;
 	cfg->f_max = get_PCLK() / 2;
 	cfg->b_max = 0x80;

 #if defined(CONFIG_S3C2410)
 	/*
 	 * S3C2410 has some bug that prevents reliable
 	 * operation at higher speed
 	 */
 	cfg->f_max /= 2;
 #endif

 	mmc = mmc_create(cfg, priv);
 	if (!mmc) {
 		free(priv);
 		return -ENOMEM;
 	}

 	return 0;
 }
	/*
	* S3C24xx SD/MMC driver
	*
	* Based on OpenMoko S3C24xx driver by Harald Welte <laforge@openmoko.org>
	*
	* Copyright (C) 2014 Marek Vasut <marex@denx.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <malloc.h>
	#include <mmc.h>
	#include <errno.h>
	#include <asm/arch/s3c24x0_cpu.h>
	#include <asm/io.h>
	#include <asm/unaligned.h>

	#define S3C2440_SDICON_SDRESET (1 << 8)
	#define S3C2410_SDICON_FIFORESET (1 << 1)
	#define S3C2410_SDICON_CLOCKTYPE (1 << 0)

	#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
	#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
	#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
	#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
	#define S3C2410_SDICMDCON_INDEX 0x3f

	#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
	#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
	#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
	#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)

	#define S3C2440_SDIDCON_DS_WORD (2 << 22)
	#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
	#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
	#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
	#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
	#define S3C2440_SDIDCON_DATSTART (1 << 14)
	#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
	#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
	#define S3C2410_SDIDCON_BLKNUM 0x7ff

	#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
	#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
	#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
	#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
	#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)

	#define S3C2410_SDIFSTA_TFHALF (1 << 11)
	#define S3C2410_SDIFSTA_COUNTMASK 0x7f

	/*
	* WARNING: We only support one SD IP block.
	* NOTE: It's not likely there will ever exist an S3C24xx with two,
	* at least not in this universe all right.
	*/
	static int wide_bus;

	static int
	s3cmmc_send_cmd(struct mmc mmc, struct mmc_cmd cmd, struct mmc_data *data)
	{
	struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
	uint32_t sdiccon, sdicsta, sdidcon, sdidsta, sdidat, sdifsta;
	uint32_t sdicsta_wait_bit = S3C2410_SDICMDSTAT_CMDSENT;
	unsigned int timeout = 100000;
	int ret = 0, xfer_len, data_offset = 0;
	const uint32_t sdidsta_err_mask = S3C2410_SDIDSTA_FIFOFAIL \|
	S3C2410_SDIDSTA_CRCFAIL \| S3C2410_SDIDSTA_RXCRCFAIL \|
	S3C2410_SDIDSTA_DATATIMEOUT;


	writel(0xffffffff, &sdi_regs->sdicsta);
	writel(0xffffffff, &sdi_regs->sdidsta);
	writel(0xffffffff, &sdi_regs->sdifsta);

	/* Set up data transfer (if applicable). */
	if (data) {
	writel(data->blocksize, &sdi_regs->sdibsize);

	sdidcon = data->blocks & S3C2410_SDIDCON_BLKNUM;
	sdidcon \|= S3C2410_SDIDCON_BLOCKMODE;
	#if defined(CONFIG_S3C2440)
	sdidcon \|= S3C2440_SDIDCON_DS_WORD \| S3C2440_SDIDCON_DATSTART;
	#endif
	if (wide_bus)
	sdidcon \|= S3C2410_SDIDCON_WIDEBUS;

	if (data->flags & MMC_DATA_READ) {
	sdidcon \|= S3C2410_SDIDCON_RXAFTERCMD;
	sdidcon \|= S3C2410_SDIDCON_XFER_RXSTART;
	} else {
	sdidcon \|= S3C2410_SDIDCON_TXAFTERRESP;
	sdidcon \|= S3C2410_SDIDCON_XFER_TXSTART;
	}

	writel(sdidcon, &sdi_regs->sdidcon);
	}

	/* Write CMD arg. */
	writel(cmd->cmdarg, &sdi_regs->sdicarg);

	/* Write CMD index. */
	sdiccon = cmd->cmdidx & S3C2410_SDICMDCON_INDEX;
	sdiccon \|= S3C2410_SDICMDCON_SENDERHOST;
	sdiccon \|= S3C2410_SDICMDCON_CMDSTART;

	/* Command with short response. */
	if (cmd->resp_type & MMC_RSP_PRESENT) {
	sdiccon \|= S3C2410_SDICMDCON_WAITRSP;
	sdicsta_wait_bit = S3C2410_SDICMDSTAT_RSPFIN;
	}

	/* Command with long response. */
	if (cmd->resp_type & MMC_RSP_136)
	sdiccon \|= S3C2410_SDICMDCON_LONGRSP;

	/* Start the command. */
	writel(sdiccon, &sdi_regs->sdiccon);

	/* Wait for the command to complete or for response. */
	for (timeout = 100000; timeout; timeout--) {
	sdicsta = readl(&sdi_regs->sdicsta);
	if (sdicsta & sdicsta_wait_bit)
	break;

	if (sdicsta & S3C2410_SDICMDSTAT_CMDTIMEOUT)
	timeout = 1;
	}

	/* Clean the status bits. */
	setbits_le32(&sdi_regs->sdicsta, 0xf << 9);

	if (!timeout) {
	puts("S3C SDI: Command timed out!\n");
	ret = TIMEOUT;
	goto error;
	}

	/* Read out the response. */
	if (cmd->resp_type & MMC_RSP_136) {
	cmd->response[0] = readl(&sdi_regs->sdirsp0);
	cmd->response[1] = readl(&sdi_regs->sdirsp1);
	cmd->response[2] = readl(&sdi_regs->sdirsp2);
	cmd->response[3] = readl(&sdi_regs->sdirsp3);
	} else {
	cmd->response[0] = readl(&sdi_regs->sdirsp0);
	}

	/* If there are no data, we're done. */
	if (!data)
	return 0;

	xfer_len = data->blocksize * data->blocks;

	while (xfer_len > 0) {
	sdidsta = readl(&sdi_regs->sdidsta);
	sdifsta = readl(&sdi_regs->sdifsta);

	if (sdidsta & sdidsta_err_mask) {
	printf("S3C SDI: Data error (sdta=0x%08x)\n", sdidsta);
	ret = -EIO;
	goto error;
	}

	if (data->flags & MMC_DATA_READ) {
	if ((sdifsta & S3C2410_SDIFSTA_COUNTMASK) < 4)
	continue;
	sdidat = readl(&sdi_regs->sdidat);
	put_unaligned_le32(sdidat, data->dest + data_offset);
	} else { /* Write */
	/* TX FIFO half full. */
	if (!(sdifsta & S3C2410_SDIFSTA_TFHALF))
	continue;

	/* TX FIFO is below 32b full, write. */
	sdidat = get_unaligned_le32(data->src + data_offset);
	writel(sdidat, &sdi_regs->sdidat);
	}
	data_offset += 4;
	xfer_len -= 4;
	}

	/* Wait for the command to complete or for response. */
	for (timeout = 100000; timeout; timeout--) {
	sdidsta = readl(&sdi_regs->sdidsta);
	if (sdidsta & S3C2410_SDIDSTA_XFERFINISH)
	break;

	if (sdidsta & S3C2410_SDIDSTA_DATATIMEOUT)
	timeout = 1;
	}

	/* Clear status bits. */
	writel(0x6f8, &sdi_regs->sdidsta);

	if (!timeout) {
	puts("S3C SDI: Command timed out!\n");
	ret = TIMEOUT;
	goto error;
	}

	writel(0, &sdi_regs->sdidcon);

	return 0;
	error:
	return ret;
	}

	static void s3cmmc_set_ios(struct mmc *mmc)
	{
	struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();
	uint32_t divider = 0;

	wide_bus = (mmc->bus_width == 4);

	if (!mmc->clock)
	return;

	divider = DIV_ROUND_UP(get_PCLK(), mmc->clock);
	if (divider)
	divider--;

	writel(divider, &sdi_regs->sdipre);
	mdelay(125);
	}

	static int s3cmmc_init(struct mmc *mmc)
	{
	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
	struct s3c24x0_sdi *sdi_regs = s3c24x0_get_base_sdi();

	/* Start the clock. */
	setbits_le32(&clk_power->clkcon, 1 << 9);

	#if defined(CONFIG_S3C2440)
	writel(S3C2440_SDICON_SDRESET, &sdi_regs->sdicon);
	mdelay(10);
	writel(0x7fffff, &sdi_regs->sdidtimer);
	#else
	writel(0xffff, &sdi_regs->sdidtimer);
	#endif
	writel(MMC_MAX_BLOCK_LEN, &sdi_regs->sdibsize);
	writel(0x0, &sdi_regs->sdiimsk);

	writel(S3C2410_SDICON_FIFORESET \| S3C2410_SDICON_CLOCKTYPE,
	&sdi_regs->sdicon);

	mdelay(125);

	return 0;
	}

	struct s3cmmc_priv {
	struct mmc_config cfg;
	int (getcd)(struct mmc );
	int (getwp)(struct mmc );
	};

	static int s3cmmc_getcd(struct mmc *mmc)
	{
	struct s3cmmc_priv *priv = mmc->priv;
	if (priv->getcd)
	return priv->getcd(mmc);
	else
	return 0;
	}

	static int s3cmmc_getwp(struct mmc *mmc)
	{
	struct s3cmmc_priv *priv = mmc->priv;
	if (priv->getwp)
	return priv->getwp(mmc);
	else
	return 0;
	}

	static const struct mmc_ops s3cmmc_ops = {
	.send_cmd = s3cmmc_send_cmd,
	.set_ios = s3cmmc_set_ios,
	.init = s3cmmc_init,
	.getcd = s3cmmc_getcd,
	.getwp = s3cmmc_getwp,
	};

	int s3cmmc_initialize(bd_t bis, int (getcd)(struct mmc *),
	int (getwp)(struct mmc ))
	{
	struct s3cmmc_priv *priv;
	struct mmc *mmc;
	struct mmc_config *cfg;

	priv = calloc(1, sizeof(*priv));
	if (!priv)
	return -ENOMEM;
	cfg = &priv->cfg;

	cfg->name = "S3C MMC";
	cfg->ops = &s3cmmc_ops;
	cfg->voltages = MMC_VDD_32_33 \| MMC_VDD_33_34;
	cfg->host_caps = MMC_MODE_4BIT \| MMC_MODE_HS;
	cfg->f_min = 400000;
	cfg->f_max = get_PCLK() / 2;
	cfg->b_max = 0x80;

	#if defined(CONFIG_S3C2410)
	/*
	* S3C2410 has some bug that prevents reliable
	* operation at higher speed
	*/
	cfg->f_max /= 2;
	#endif

	mmc = mmc_create(cfg, priv);
	if (!mmc) {
	free(priv);
	return -ENOMEM;
	}

	return 0;
	}