| /* |
| * Copyright 2007,2010 Freescale Semiconductor, Inc |
| * Andy Fleming |
| * |
| * Based vaguely on the pxa mmc code: |
| * (C) Copyright 2003 |
| * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <command.h> |
| #include <hwconfig.h> |
| #include <mmc.h> |
| #include <part.h> |
| #include <malloc.h> |
| #include <mmc.h> |
| #include <fsl_esdhc.h> |
| #include <fdt_support.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct fsl_esdhc { |
| uint dsaddr; |
| uint blkattr; |
| uint cmdarg; |
| uint xfertyp; |
| uint cmdrsp0; |
| uint cmdrsp1; |
| uint cmdrsp2; |
| uint cmdrsp3; |
| uint datport; |
| uint prsstat; |
| uint proctl; |
| uint sysctl; |
| uint irqstat; |
| uint irqstaten; |
| uint irqsigen; |
| uint autoc12err; |
| uint hostcapblt; |
| uint wml; |
| char reserved1[8]; |
| uint fevt; |
| char reserved2[168]; |
| uint hostver; |
| char reserved3[780]; |
| uint scr; |
| }; |
| |
| /* Return the XFERTYP flags for a given command and data packet */ |
| uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) |
| { |
| uint xfertyp = 0; |
| |
| if (data) { |
| xfertyp |= XFERTYP_DPSEL | XFERTYP_DMAEN; |
| |
| if (data->blocks > 1) { |
| xfertyp |= XFERTYP_MSBSEL; |
| xfertyp |= XFERTYP_BCEN; |
| } |
| |
| if (data->flags & MMC_DATA_READ) |
| xfertyp |= XFERTYP_DTDSEL; |
| } |
| |
| if (cmd->resp_type & MMC_RSP_CRC) |
| xfertyp |= XFERTYP_CCCEN; |
| if (cmd->resp_type & MMC_RSP_OPCODE) |
| xfertyp |= XFERTYP_CICEN; |
| if (cmd->resp_type & MMC_RSP_136) |
| xfertyp |= XFERTYP_RSPTYP_136; |
| else if (cmd->resp_type & MMC_RSP_BUSY) |
| xfertyp |= XFERTYP_RSPTYP_48_BUSY; |
| else if (cmd->resp_type & MMC_RSP_PRESENT) |
| xfertyp |= XFERTYP_RSPTYP_48; |
| |
| return XFERTYP_CMD(cmd->cmdidx) | xfertyp; |
| } |
| |
| static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) |
| { |
| uint wml_value; |
| int timeout; |
| struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; |
| |
| wml_value = data->blocksize/4; |
| |
| if (data->flags & MMC_DATA_READ) { |
| if (wml_value > 0x10) |
| wml_value = 0x10; |
| |
| esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); |
| esdhc_write32(®s->dsaddr, (u32)data->dest); |
| } else { |
| if (wml_value > 0x80) |
| wml_value = 0x80; |
| if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { |
| printf("\nThe SD card is locked. Can not write to a locked card.\n\n"); |
| return TIMEOUT; |
| } |
| |
| esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK, |
| wml_value << 16); |
| esdhc_write32(®s->dsaddr, (u32)data->src); |
| } |
| |
| esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize); |
| |
| /* Calculate the timeout period for data transactions */ |
| timeout = fls(mmc->tran_speed/10) - 1; |
| timeout -= 13; |
| |
| if (timeout > 14) |
| timeout = 14; |
| |
| if (timeout < 0) |
| timeout = 0; |
| |
| esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Sends a command out on the bus. Takes the mmc pointer, |
| * a command pointer, and an optional data pointer. |
| */ |
| static int |
| esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) |
| { |
| uint xfertyp; |
| uint irqstat; |
| struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; |
| |
| esdhc_write32(®s->irqstat, -1); |
| |
| sync(); |
| |
| /* Wait for the bus to be idle */ |
| while ((esdhc_read32(®s->prsstat) & PRSSTAT_CICHB) || |
| (esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB)) |
| ; |
| |
| while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA) |
| ; |
| |
| /* Wait at least 8 SD clock cycles before the next command */ |
| /* |
| * Note: This is way more than 8 cycles, but 1ms seems to |
| * resolve timing issues with some cards |
| */ |
| udelay(1000); |
| |
| /* Set up for a data transfer if we have one */ |
| if (data) { |
| int err; |
| |
| err = esdhc_setup_data(mmc, data); |
| if(err) |
| return err; |
| } |
| |
| /* Figure out the transfer arguments */ |
| xfertyp = esdhc_xfertyp(cmd, data); |
| |
| /* Send the command */ |
| esdhc_write32(®s->cmdarg, cmd->cmdarg); |
| esdhc_write32(®s->xfertyp, xfertyp); |
| |
| /* Wait for the command to complete */ |
| while (!(esdhc_read32(®s->irqstat) & IRQSTAT_CC)) |
| ; |
| |
| irqstat = esdhc_read32(®s->irqstat); |
| esdhc_write32(®s->irqstat, irqstat); |
| |
| if (irqstat & CMD_ERR) |
| return COMM_ERR; |
| |
| if (irqstat & IRQSTAT_CTOE) |
| return TIMEOUT; |
| |
| /* Copy the response to the response buffer */ |
| if (cmd->resp_type & MMC_RSP_136) { |
| u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0; |
| |
| cmdrsp3 = esdhc_read32(®s->cmdrsp3); |
| cmdrsp2 = esdhc_read32(®s->cmdrsp2); |
| cmdrsp1 = esdhc_read32(®s->cmdrsp1); |
| cmdrsp0 = esdhc_read32(®s->cmdrsp0); |
| cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24); |
| cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24); |
| cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24); |
| cmd->response[3] = (cmdrsp0 << 8); |
| } else |
| cmd->response[0] = esdhc_read32(®s->cmdrsp0); |
| |
| /* Wait until all of the blocks are transferred */ |
| if (data) { |
| do { |
| irqstat = esdhc_read32(®s->irqstat); |
| |
| if (irqstat & DATA_ERR) |
| return COMM_ERR; |
| |
| if (irqstat & IRQSTAT_DTOE) |
| return TIMEOUT; |
| } while (!(irqstat & IRQSTAT_TC) && |
| (esdhc_read32(®s->prsstat) & PRSSTAT_DLA)); |
| } |
| |
| esdhc_write32(®s->irqstat, -1); |
| |
| return 0; |
| } |
| |
| void set_sysctl(struct mmc *mmc, uint clock) |
| { |
| int sdhc_clk = gd->sdhc_clk; |
| int div, pre_div; |
| struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; |
| uint clk; |
| |
| if (clock < mmc->f_min) |
| clock = mmc->f_min; |
| |
| if (sdhc_clk / 16 > clock) { |
| for (pre_div = 2; pre_div < 256; pre_div *= 2) |
| if ((sdhc_clk / pre_div) <= (clock * 16)) |
| break; |
| } else |
| pre_div = 2; |
| |
| for (div = 1; div <= 16; div++) |
| if ((sdhc_clk / (div * pre_div)) <= clock) |
| break; |
| |
| pre_div >>= 1; |
| div -= 1; |
| |
| clk = (pre_div << 8) | (div << 4); |
| |
| esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN); |
| |
| esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk); |
| |
| udelay(10000); |
| |
| clk = SYSCTL_PEREN | SYSCTL_CKEN; |
| |
| esdhc_setbits32(®s->sysctl, clk); |
| } |
| |
| static void esdhc_set_ios(struct mmc *mmc) |
| { |
| struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; |
| |
| /* Set the clock speed */ |
| set_sysctl(mmc, mmc->clock); |
| |
| /* Set the bus width */ |
| esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8); |
| |
| if (mmc->bus_width == 4) |
| esdhc_setbits32(®s->proctl, PROCTL_DTW_4); |
| else if (mmc->bus_width == 8) |
| esdhc_setbits32(®s->proctl, PROCTL_DTW_8); |
| |
| } |
| |
| static int esdhc_init(struct mmc *mmc) |
| { |
| struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; |
| int timeout = 1000; |
| int ret = 0; |
| u8 card_absent; |
| |
| /* Enable cache snooping */ |
| if (cfg && !cfg->no_snoop) |
| esdhc_write32(®s->scr, 0x00000040); |
| |
| /* Reset the entire host controller */ |
| esdhc_write32(®s->sysctl, SYSCTL_RSTA); |
| |
| /* Wait until the controller is available */ |
| while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) |
| udelay(1000); |
| |
| esdhc_write32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN); |
| |
| /* Set the initial clock speed */ |
| set_sysctl(mmc, 400000); |
| |
| /* Disable the BRR and BWR bits in IRQSTAT */ |
| esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR); |
| |
| /* Put the PROCTL reg back to the default */ |
| esdhc_write32(®s->proctl, PROCTL_INIT); |
| |
| /* Set timout to the maximum value */ |
| esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16); |
| |
| /* Check if there is a callback for detecting the card */ |
| if (board_mmc_getcd(&card_absent, mmc)) { |
| timeout = 1000; |
| while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) && |
| --timeout) |
| udelay(1000); |
| |
| if (timeout <= 0) |
| ret = NO_CARD_ERR; |
| } else { |
| if (card_absent) |
| ret = NO_CARD_ERR; |
| } |
| |
| return ret; |
| } |
| |
| static void esdhc_reset(struct fsl_esdhc *regs) |
| { |
| unsigned long timeout = 100; /* wait max 100 ms */ |
| |
| /* reset the controller */ |
| esdhc_write32(®s->sysctl, SYSCTL_RSTA); |
| |
| /* hardware clears the bit when it is done */ |
| while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) |
| udelay(1000); |
| if (!timeout) |
| printf("MMC/SD: Reset never completed.\n"); |
| } |
| |
| int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) |
| { |
| struct fsl_esdhc *regs; |
| struct mmc *mmc; |
| u32 caps; |
| |
| if (!cfg) |
| return -1; |
| |
| mmc = malloc(sizeof(struct mmc)); |
| |
| sprintf(mmc->name, "FSL_ESDHC"); |
| regs = (struct fsl_esdhc *)cfg->esdhc_base; |
| |
| /* First reset the eSDHC controller */ |
| esdhc_reset(regs); |
| |
| mmc->priv = cfg; |
| mmc->send_cmd = esdhc_send_cmd; |
| mmc->set_ios = esdhc_set_ios; |
| mmc->init = esdhc_init; |
| |
| caps = regs->hostcapblt; |
| |
| if (caps & ESDHC_HOSTCAPBLT_VS18) |
| mmc->voltages |= MMC_VDD_165_195; |
| if (caps & ESDHC_HOSTCAPBLT_VS30) |
| mmc->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31; |
| if (caps & ESDHC_HOSTCAPBLT_VS33) |
| mmc->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34; |
| |
| mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; |
| |
| if (caps & ESDHC_HOSTCAPBLT_HSS) |
| mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; |
| |
| mmc->f_min = 400000; |
| mmc->f_max = MIN(gd->sdhc_clk, 50000000); |
| |
| mmc_register(mmc); |
| |
| return 0; |
| } |
| |
| int fsl_esdhc_mmc_init(bd_t *bis) |
| { |
| struct fsl_esdhc_cfg *cfg; |
| |
| cfg = malloc(sizeof(struct fsl_esdhc_cfg)); |
| memset(cfg, 0, sizeof(struct fsl_esdhc_cfg)); |
| cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; |
| return fsl_esdhc_initialize(bis, cfg); |
| } |
| |
| #ifdef CONFIG_OF_LIBFDT |
| void fdt_fixup_esdhc(void *blob, bd_t *bd) |
| { |
| const char *compat = "fsl,esdhc"; |
| const char *status = "okay"; |
| |
| if (!hwconfig("esdhc")) { |
| status = "disabled"; |
| goto out; |
| } |
| |
| do_fixup_by_compat_u32(blob, compat, "clock-frequency", |
| gd->sdhc_clk, 1); |
| out: |
| do_fixup_by_compat(blob, compat, "status", status, |
| strlen(status) + 1, 1); |
| } |
| #endif |