| /* |
| * Porting to u-boot: |
| * |
| * (C) Copyright 2011 |
| * Stefano Babic, DENX Software Engineering, sbabic@denx.de. |
| * |
| * Copyright (C) 2008-2009 MontaVista Software Inc. |
| * Copyright (C) 2008-2009 Texas Instruments Inc |
| * |
| * Based on the LCD driver for TI Avalanche processors written by |
| * Ajay Singh and Shalom Hai. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <video_fb.h> |
| #include <linux/list.h> |
| #include <linux/fb.h> |
| |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/hardware.h> |
| |
| #include "videomodes.h" |
| #include <asm/arch/da8xx-fb.h> |
| |
| #define DRIVER_NAME "da8xx_lcdc" |
| |
| /* LCD Status Register */ |
| #define LCD_END_OF_FRAME1 (1 << 9) |
| #define LCD_END_OF_FRAME0 (1 << 8) |
| #define LCD_PL_LOAD_DONE (1 << 6) |
| #define LCD_FIFO_UNDERFLOW (1 << 5) |
| #define LCD_SYNC_LOST (1 << 2) |
| |
| /* LCD DMA Control Register */ |
| #define LCD_DMA_BURST_SIZE(x) ((x) << 4) |
| #define LCD_DMA_BURST_1 0x0 |
| #define LCD_DMA_BURST_2 0x1 |
| #define LCD_DMA_BURST_4 0x2 |
| #define LCD_DMA_BURST_8 0x3 |
| #define LCD_DMA_BURST_16 0x4 |
| #define LCD_END_OF_FRAME_INT_ENA (1 << 2) |
| #define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0) |
| |
| /* LCD Control Register */ |
| #define LCD_CLK_DIVISOR(x) ((x) << 8) |
| #define LCD_RASTER_MODE 0x01 |
| |
| /* LCD Raster Control Register */ |
| #define LCD_PALETTE_LOAD_MODE(x) ((x) << 20) |
| #define PALETTE_AND_DATA 0x00 |
| #define PALETTE_ONLY 0x01 |
| #define DATA_ONLY 0x02 |
| |
| #define LCD_MONO_8BIT_MODE (1 << 9) |
| #define LCD_RASTER_ORDER (1 << 8) |
| #define LCD_TFT_MODE (1 << 7) |
| #define LCD_UNDERFLOW_INT_ENA (1 << 6) |
| #define LCD_PL_ENABLE (1 << 4) |
| #define LCD_MONOCHROME_MODE (1 << 1) |
| #define LCD_RASTER_ENABLE (1 << 0) |
| #define LCD_TFT_ALT_ENABLE (1 << 23) |
| #define LCD_STN_565_ENABLE (1 << 24) |
| |
| /* LCD Raster Timing 2 Register */ |
| #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) |
| #define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8) |
| #define LCD_SYNC_CTRL (1 << 25) |
| #define LCD_SYNC_EDGE (1 << 24) |
| #define LCD_INVERT_PIXEL_CLOCK (1 << 22) |
| #define LCD_INVERT_LINE_CLOCK (1 << 21) |
| #define LCD_INVERT_FRAME_CLOCK (1 << 20) |
| |
| /* LCD Block */ |
| struct da8xx_lcd_regs { |
| u32 revid; |
| u32 ctrl; |
| u32 stat; |
| u32 lidd_ctrl; |
| u32 lidd_cs0_conf; |
| u32 lidd_cs0_addr; |
| u32 lidd_cs0_data; |
| u32 lidd_cs1_conf; |
| u32 lidd_cs1_addr; |
| u32 lidd_cs1_data; |
| u32 raster_ctrl; |
| u32 raster_timing_0; |
| u32 raster_timing_1; |
| u32 raster_timing_2; |
| u32 raster_subpanel; |
| u32 reserved; |
| u32 dma_ctrl; |
| u32 dma_frm_buf_base_addr_0; |
| u32 dma_frm_buf_ceiling_addr_0; |
| u32 dma_frm_buf_base_addr_1; |
| u32 dma_frm_buf_ceiling_addr_1; |
| }; |
| |
| #define LCD_NUM_BUFFERS 1 |
| |
| #define WSI_TIMEOUT 50 |
| #define PALETTE_SIZE 256 |
| #define LEFT_MARGIN 64 |
| #define RIGHT_MARGIN 64 |
| #define UPPER_MARGIN 32 |
| #define LOWER_MARGIN 32 |
| |
| #define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP) |
| |
| static struct da8xx_lcd_regs *da8xx_fb_reg_base; |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* graphics setup */ |
| static GraphicDevice gpanel; |
| static const struct da8xx_panel *lcd_panel; |
| static struct fb_info *da8xx_fb_info; |
| static int bits_x_pixel; |
| |
| static inline unsigned int lcdc_read(u32 *addr) |
| { |
| return (unsigned int)readl(addr); |
| } |
| |
| static inline void lcdc_write(unsigned int val, u32 *addr) |
| { |
| writel(val, addr); |
| } |
| |
| struct da8xx_fb_par { |
| u32 p_palette_base; |
| unsigned char *v_palette_base; |
| dma_addr_t vram_phys; |
| unsigned long vram_size; |
| void *vram_virt; |
| unsigned int dma_start; |
| unsigned int dma_end; |
| struct clk *lcdc_clk; |
| int irq; |
| unsigned short pseudo_palette[16]; |
| unsigned int palette_sz; |
| unsigned int pxl_clk; |
| int blank; |
| int vsync_flag; |
| int vsync_timeout; |
| }; |
| |
| |
| /* Variable Screen Information */ |
| static struct fb_var_screeninfo da8xx_fb_var = { |
| .xoffset = 0, |
| .yoffset = 0, |
| .transp = {0, 0, 0}, |
| .nonstd = 0, |
| .activate = 0, |
| .height = -1, |
| .width = -1, |
| .pixclock = 46666, /* 46us - AUO display */ |
| .accel_flags = 0, |
| .left_margin = LEFT_MARGIN, |
| .right_margin = RIGHT_MARGIN, |
| .upper_margin = UPPER_MARGIN, |
| .lower_margin = LOWER_MARGIN, |
| .sync = 0, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| static struct fb_fix_screeninfo da8xx_fb_fix = { |
| .id = "DA8xx FB Drv", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .type_aux = 0, |
| .visual = FB_VISUAL_PSEUDOCOLOR, |
| .xpanstep = 0, |
| .ypanstep = 1, |
| .ywrapstep = 0, |
| .accel = FB_ACCEL_NONE |
| }; |
| |
| static const struct display_panel disp_panel = { |
| QVGA, |
| 16, |
| 16, |
| COLOR_ACTIVE, |
| }; |
| |
| static const struct lcd_ctrl_config lcd_cfg = { |
| &disp_panel, |
| .ac_bias = 255, |
| .ac_bias_intrpt = 0, |
| .dma_burst_sz = 16, |
| .bpp = 16, |
| .fdd = 255, |
| .tft_alt_mode = 0, |
| .stn_565_mode = 0, |
| .mono_8bit_mode = 0, |
| .invert_line_clock = 1, |
| .invert_frm_clock = 1, |
| .sync_edge = 0, |
| .sync_ctrl = 1, |
| .raster_order = 0, |
| }; |
| |
| /* Enable the Raster Engine of the LCD Controller */ |
| static inline void lcd_enable_raster(void) |
| { |
| u32 reg; |
| |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); |
| if (!(reg & LCD_RASTER_ENABLE)) |
| lcdc_write(reg | LCD_RASTER_ENABLE, |
| &da8xx_fb_reg_base->raster_ctrl); |
| } |
| |
| /* Disable the Raster Engine of the LCD Controller */ |
| static inline void lcd_disable_raster(void) |
| { |
| u32 reg; |
| |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); |
| if (reg & LCD_RASTER_ENABLE) |
| lcdc_write(reg & ~LCD_RASTER_ENABLE, |
| &da8xx_fb_reg_base->raster_ctrl); |
| } |
| |
| static void lcd_blit(int load_mode, struct da8xx_fb_par *par) |
| { |
| u32 start; |
| u32 end; |
| u32 reg_ras; |
| u32 reg_dma; |
| |
| /* init reg to clear PLM (loading mode) fields */ |
| reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); |
| reg_ras &= ~(3 << 20); |
| |
| reg_dma = lcdc_read(&da8xx_fb_reg_base->dma_ctrl); |
| |
| if (load_mode == LOAD_DATA) { |
| start = par->dma_start; |
| end = par->dma_end; |
| |
| reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); |
| reg_dma |= LCD_END_OF_FRAME_INT_ENA; |
| |
| #if (LCD_NUM_BUFFERS == 2) |
| reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; |
| lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); |
| lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); |
| lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); |
| lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); |
| #else |
| reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE; |
| lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); |
| lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); |
| lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); |
| lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); |
| #endif |
| |
| } else if (load_mode == LOAD_PALETTE) { |
| start = par->p_palette_base; |
| end = start + par->palette_sz - 1; |
| |
| reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); |
| reg_ras |= LCD_PL_ENABLE; |
| |
| lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); |
| lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); |
| } |
| |
| lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl); |
| lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); |
| |
| /* |
| * The Raster enable bit must be set after all other control fields are |
| * set. |
| */ |
| lcd_enable_raster(); |
| } |
| |
| /* Configure the Burst Size of DMA */ |
| static int lcd_cfg_dma(int burst_size) |
| { |
| u32 reg; |
| |
| reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001; |
| switch (burst_size) { |
| case 1: |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1); |
| break; |
| case 2: |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2); |
| break; |
| case 4: |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4); |
| break; |
| case 8: |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8); |
| break; |
| case 16: |
| reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); |
| break; |
| default: |
| return -EINVAL; |
| } |
| lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl); |
| |
| return 0; |
| } |
| |
| static void lcd_cfg_ac_bias(int period, int transitions_per_int) |
| { |
| u32 reg; |
| |
| /* Set the AC Bias Period and Number of Transisitons per Interrupt */ |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000; |
| reg |= LCD_AC_BIAS_FREQUENCY(period) | |
| LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int); |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); |
| } |
| |
| static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, |
| int front_porch) |
| { |
| u32 reg; |
| |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf; |
| reg |= ((back_porch & 0xff) << 24) |
| | ((front_porch & 0xff) << 16) |
| | ((pulse_width & 0x3f) << 10); |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); |
| } |
| |
| static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, |
| int front_porch) |
| { |
| u32 reg; |
| |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff; |
| reg |= ((back_porch & 0xff) << 24) |
| | ((front_porch & 0xff) << 16) |
| | ((pulse_width & 0x3f) << 10); |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); |
| } |
| |
| static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) |
| { |
| u32 reg; |
| |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE | |
| LCD_MONO_8BIT_MODE | |
| LCD_MONOCHROME_MODE); |
| |
| switch (cfg->p_disp_panel->panel_shade) { |
| case MONOCHROME: |
| reg |= LCD_MONOCHROME_MODE; |
| if (cfg->mono_8bit_mode) |
| reg |= LCD_MONO_8BIT_MODE; |
| break; |
| case COLOR_ACTIVE: |
| reg |= LCD_TFT_MODE; |
| if (cfg->tft_alt_mode) |
| reg |= LCD_TFT_ALT_ENABLE; |
| break; |
| |
| case COLOR_PASSIVE: |
| if (cfg->stn_565_mode) |
| reg |= LCD_STN_565_ENABLE; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| /* enable additional interrupts here */ |
| reg |= LCD_UNDERFLOW_INT_ENA; |
| |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); |
| |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2); |
| |
| if (cfg->sync_ctrl) |
| reg |= LCD_SYNC_CTRL; |
| else |
| reg &= ~LCD_SYNC_CTRL; |
| |
| if (cfg->sync_edge) |
| reg |= LCD_SYNC_EDGE; |
| else |
| reg &= ~LCD_SYNC_EDGE; |
| |
| if (cfg->invert_line_clock) |
| reg |= LCD_INVERT_LINE_CLOCK; |
| else |
| reg &= ~LCD_INVERT_LINE_CLOCK; |
| |
| if (cfg->invert_frm_clock) |
| reg |= LCD_INVERT_FRAME_CLOCK; |
| else |
| reg &= ~LCD_INVERT_FRAME_CLOCK; |
| |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); |
| |
| return 0; |
| } |
| |
| static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, |
| u32 bpp, u32 raster_order) |
| { |
| u32 reg; |
| |
| /* Set the Panel Width */ |
| /* Pixels per line = (PPL + 1)*16 */ |
| /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/ |
| width &= 0x3f0; |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0); |
| reg &= 0xfffffc00; |
| reg |= ((width >> 4) - 1) << 4; |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); |
| |
| /* Set the Panel Height */ |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1); |
| reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); |
| |
| /* Set the Raster Order of the Frame Buffer */ |
| reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8); |
| if (raster_order) |
| reg |= LCD_RASTER_ORDER; |
| lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); |
| |
| switch (bpp) { |
| case 1: |
| case 2: |
| case 4: |
| case 16: |
| par->palette_sz = 16 * 2; |
| break; |
| |
| case 8: |
| par->palette_sz = 256 * 2; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *info) |
| { |
| struct da8xx_fb_par *par = info->par; |
| unsigned short *palette = (unsigned short *) par->v_palette_base; |
| u_short pal; |
| int update_hw = 0; |
| |
| if (regno > 255) |
| return 1; |
| |
| if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) |
| return 1; |
| |
| if (info->var.bits_per_pixel == 8) { |
| red >>= 4; |
| green >>= 8; |
| blue >>= 12; |
| |
| pal = (red & 0x0f00); |
| pal |= (green & 0x00f0); |
| pal |= (blue & 0x000f); |
| |
| if (palette[regno] != pal) { |
| update_hw = 1; |
| palette[regno] = pal; |
| } |
| } else if ((info->var.bits_per_pixel == 16) && regno < 16) { |
| red >>= (16 - info->var.red.length); |
| red <<= info->var.red.offset; |
| |
| green >>= (16 - info->var.green.length); |
| green <<= info->var.green.offset; |
| |
| blue >>= (16 - info->var.blue.length); |
| blue <<= info->var.blue.offset; |
| |
| par->pseudo_palette[regno] = red | green | blue; |
| |
| if (palette[0] != 0x4000) { |
| update_hw = 1; |
| palette[0] = 0x4000; |
| } |
| } |
| |
| /* Update the palette in the h/w as needed. */ |
| if (update_hw) |
| lcd_blit(LOAD_PALETTE, par); |
| |
| return 0; |
| } |
| |
| static void lcd_reset(struct da8xx_fb_par *par) |
| { |
| /* Disable the Raster if previously Enabled */ |
| lcd_disable_raster(); |
| |
| /* DMA has to be disabled */ |
| lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl); |
| lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl); |
| } |
| |
| static void lcd_calc_clk_divider(struct da8xx_fb_par *par) |
| { |
| unsigned int lcd_clk, div; |
| |
| /* Get clock from sysclk2 */ |
| lcd_clk = clk_get(2); |
| |
| div = lcd_clk / par->pxl_clk; |
| debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n", |
| lcd_clk, div, par->pxl_clk); |
| |
| /* Configure the LCD clock divisor. */ |
| lcdc_write(LCD_CLK_DIVISOR(div) | |
| (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl); |
| } |
| |
| static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, |
| const struct da8xx_panel *panel) |
| { |
| u32 bpp; |
| int ret = 0; |
| |
| lcd_reset(par); |
| |
| /* Calculate the divider */ |
| lcd_calc_clk_divider(par); |
| |
| if (panel->invert_pxl_clk) |
| lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) | |
| LCD_INVERT_PIXEL_CLOCK), |
| &da8xx_fb_reg_base->raster_timing_2); |
| else |
| lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & |
| ~LCD_INVERT_PIXEL_CLOCK), |
| &da8xx_fb_reg_base->raster_timing_2); |
| |
| /* Configure the DMA burst size. */ |
| ret = lcd_cfg_dma(cfg->dma_burst_sz); |
| if (ret < 0) |
| return ret; |
| |
| /* Configure the AC bias properties. */ |
| lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt); |
| |
| /* Configure the vertical and horizontal sync properties. */ |
| lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp); |
| lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp); |
| |
| /* Configure for disply */ |
| ret = lcd_cfg_display(cfg); |
| if (ret < 0) |
| return ret; |
| |
| if (QVGA != cfg->p_disp_panel->panel_type) |
| return -EINVAL; |
| |
| if (cfg->bpp <= cfg->p_disp_panel->max_bpp && |
| cfg->bpp >= cfg->p_disp_panel->min_bpp) |
| bpp = cfg->bpp; |
| else |
| bpp = cfg->p_disp_panel->max_bpp; |
| if (bpp == 12) |
| bpp = 16; |
| ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width, |
| (unsigned int)panel->height, bpp, |
| cfg->raster_order); |
| if (ret < 0) |
| return ret; |
| |
| /* Configure FDD */ |
| lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) | |
| (cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl); |
| |
| return 0; |
| } |
| |
| static void lcdc_dma_start(void) |
| { |
| struct da8xx_fb_par *par = da8xx_fb_info->par; |
| lcdc_write(par->dma_start, |
| &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); |
| lcdc_write(par->dma_end, |
| &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); |
| lcdc_write(0, |
| &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); |
| lcdc_write(0, |
| &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); |
| } |
| |
| static u32 lcdc_irq_handler(void) |
| { |
| struct da8xx_fb_par *par = da8xx_fb_info->par; |
| u32 stat = lcdc_read(&da8xx_fb_reg_base->stat); |
| u32 reg_ras; |
| |
| if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { |
| debug("LCD_SYNC_LOST\n"); |
| lcd_disable_raster(); |
| lcdc_write(stat, &da8xx_fb_reg_base->stat); |
| lcd_enable_raster(); |
| return LCD_SYNC_LOST; |
| } else if (stat & LCD_PL_LOAD_DONE) { |
| debug("LCD_PL_LOAD_DONE\n"); |
| /* |
| * Must disable raster before changing state of any control bit. |
| * And also must be disabled before clearing the PL loading |
| * interrupt via the following write to the status register. If |
| * this is done after then one gets multiple PL done interrupts. |
| */ |
| lcd_disable_raster(); |
| |
| lcdc_write(stat, &da8xx_fb_reg_base->stat); |
| |
| /* Disable PL completion inerrupt */ |
| reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); |
| reg_ras &= ~LCD_PL_ENABLE; |
| lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); |
| |
| /* Setup and start data loading mode */ |
| lcd_blit(LOAD_DATA, par); |
| return LCD_PL_LOAD_DONE; |
| } else { |
| lcdc_write(stat, &da8xx_fb_reg_base->stat); |
| |
| if (stat & LCD_END_OF_FRAME0) |
| debug("LCD_END_OF_FRAME0\n"); |
| |
| lcdc_write(par->dma_start, |
| &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); |
| lcdc_write(par->dma_end, |
| &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); |
| par->vsync_flag = 1; |
| return LCD_END_OF_FRAME0; |
| } |
| return stat; |
| } |
| |
| static u32 wait_for_event(u32 event) |
| { |
| u32 timeout = 50000; |
| u32 ret; |
| |
| do { |
| ret = lcdc_irq_handler(); |
| udelay(1000); |
| } while (!(ret & event)); |
| |
| if (timeout <= 0) { |
| printf("%s: event %d not hit\n", __func__, event); |
| return -1; |
| } |
| |
| return 0; |
| |
| } |
| |
| void *video_hw_init(void) |
| { |
| struct da8xx_fb_par *par; |
| u32 size; |
| char *p; |
| |
| if (!lcd_panel) { |
| printf("Display not initialized\n"); |
| return NULL; |
| } |
| gpanel.winSizeX = lcd_panel->width; |
| gpanel.winSizeY = lcd_panel->height; |
| gpanel.plnSizeX = lcd_panel->width; |
| gpanel.plnSizeY = lcd_panel->height; |
| |
| switch (bits_x_pixel) { |
| case 24: |
| gpanel.gdfBytesPP = 4; |
| gpanel.gdfIndex = GDF_32BIT_X888RGB; |
| break; |
| case 16: |
| gpanel.gdfBytesPP = 2; |
| gpanel.gdfIndex = GDF_16BIT_565RGB; |
| break; |
| default: |
| gpanel.gdfBytesPP = 1; |
| gpanel.gdfIndex = GDF__8BIT_INDEX; |
| break; |
| } |
| |
| da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE; |
| |
| debug("Resolution: %dx%d %x\n", |
| gpanel.winSizeX, |
| gpanel.winSizeY, |
| lcd_cfg.bpp); |
| |
| size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par); |
| da8xx_fb_info = malloc(size); |
| debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info); |
| |
| if (!da8xx_fb_info) { |
| printf("Memory allocation failed for fb_info\n"); |
| return NULL; |
| } |
| memset(da8xx_fb_info, 0, size); |
| p = (char *)da8xx_fb_info; |
| da8xx_fb_info->par = p + sizeof(struct fb_info); |
| debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par); |
| |
| par = da8xx_fb_info->par; |
| par->pxl_clk = lcd_panel->pxl_clk; |
| |
| if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) { |
| printf("lcd_init failed\n"); |
| goto err_release_fb; |
| } |
| |
| /* allocate frame buffer */ |
| par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp; |
| par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8; |
| |
| par->vram_virt = malloc(par->vram_size); |
| |
| par->vram_phys = (dma_addr_t) par->vram_virt; |
| debug("Requesting 0x%x bytes for framebuffer at 0x%x\n", |
| (unsigned int)par->vram_size, |
| (unsigned int)par->vram_virt); |
| if (!par->vram_virt) { |
| printf("GLCD: malloc for frame buffer failed\n"); |
| goto err_release_fb; |
| } |
| |
| gpanel.frameAdrs = (unsigned int)par->vram_virt; |
| da8xx_fb_info->screen_base = (char *) par->vram_virt; |
| da8xx_fb_fix.smem_start = gpanel.frameAdrs; |
| da8xx_fb_fix.smem_len = par->vram_size; |
| da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8; |
| |
| par->dma_start = par->vram_phys; |
| par->dma_end = par->dma_start + lcd_panel->height * |
| da8xx_fb_fix.line_length - 1; |
| |
| /* allocate palette buffer */ |
| par->v_palette_base = malloc(PALETTE_SIZE); |
| if (!par->v_palette_base) { |
| printf("GLCD: malloc for palette buffer failed\n"); |
| goto err_release_fb_mem; |
| } |
| memset(par->v_palette_base, 0, PALETTE_SIZE); |
| par->p_palette_base = (unsigned int)par->v_palette_base; |
| |
| /* Initialize par */ |
| da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp; |
| |
| da8xx_fb_var.xres = lcd_panel->width; |
| da8xx_fb_var.xres_virtual = lcd_panel->width; |
| |
| da8xx_fb_var.yres = lcd_panel->height; |
| da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS; |
| |
| da8xx_fb_var.grayscale = |
| lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; |
| da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp; |
| |
| da8xx_fb_var.hsync_len = lcd_panel->hsw; |
| da8xx_fb_var.vsync_len = lcd_panel->vsw; |
| |
| /* Initialize fbinfo */ |
| da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT; |
| da8xx_fb_info->fix = da8xx_fb_fix; |
| da8xx_fb_info->var = da8xx_fb_var; |
| da8xx_fb_info->pseudo_palette = par->pseudo_palette; |
| da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? |
| FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; |
| |
| /* Clear interrupt */ |
| memset((void *)par->vram_virt, 0, par->vram_size); |
| lcd_disable_raster(); |
| lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); |
| debug("Palette at 0x%x size %d\n", par->p_palette_base, |
| par->palette_sz); |
| lcdc_dma_start(); |
| |
| /* Load a default palette */ |
| fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info); |
| |
| /* Check that the palette is loaded */ |
| wait_for_event(LCD_PL_LOAD_DONE); |
| |
| /* Wait until DMA is working */ |
| wait_for_event(LCD_END_OF_FRAME0); |
| |
| return (void *)&gpanel; |
| |
| err_release_fb_mem: |
| free(par->vram_virt); |
| |
| err_release_fb: |
| free(da8xx_fb_info); |
| |
| return NULL; |
| } |
| |
| void video_set_lut(unsigned int index, /* color number */ |
| unsigned char r, /* red */ |
| unsigned char g, /* green */ |
| unsigned char b /* blue */ |
| ) |
| { |
| |
| return; |
| } |
| |
| void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel) |
| { |
| lcd_panel = panel; |
| bits_x_pixel = bits_pixel; |
| } |