blob: f475fb36107106e86d95b316367e4e11623bf13d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016- 2021 Marvell International Ltd.
*/
/*
* Device Tree file for Marvell Armada 7040 Development board platform
* Boot device: SPI NOR, 0x32 (SW3)
*/
#include "armada-7040.dtsi"
/ {
model = "Marvell Armada 7040 DB board";
compatible = "marvell,armada7040-db", "marvell,armada7040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
i2c0 = &cp0_i2c0;
spi0 = &cp0_spi1;
};
memory@00000000 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
&ap_pinctl {
/* MPP Bus:
* SDIO [0-5]
* UART0 [11,19]
*/
/* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 1 1 1 1 1 1 0 0 0 0
0 3 0 0 0 0 0 0 0 3 >;
};
&uart0 {
status = "okay";
};
&cp0_pcie2 {
status = "okay";
};
&cp0_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
clock-frequency = <100000>;
};
&cp0_pinctl {
/* MPP Bus:
* TDM [0-11]
* SPI [13-16]
* SATA1 [28]
* UART0 [29-30]
* SMI [32,34]
* XSMI [35-36]
* I2C [37-38]
* RGMII1[44-55]
* SD [56-62]
*/
/* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 4 4 4 4 4 4 4 4 4 4
4 4 0 3 3 3 3 0 0 0
0 0 0 0 0 0 0 0 9 0xA
0xA 0 7 0 7 7 7 2 2 0
0 0 0 0 1 1 1 1 1 1
1 1 1 1 1 1 0xE 0xE 0xE 0xE
0xE 0xE 0xE >;
};
&cp0_spi1 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_spi0_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x200000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x200000 0xe00000>;
};
};
};
};
&cp0_sata0 {
status = "okay";
};
&cp0_usb3_0 {
status = "okay";
};
&cp0_usb3_1 {
status = "okay";
};
&cp0_comphy {
phy0 {
phy-type = <COMPHY_TYPE_SGMII1>;
phy-speed = <COMPHY_SPEED_1_25G>;
};
phy1 {
phy-type = <COMPHY_TYPE_USB3_HOST0>;
phy-speed = <COMPHY_SPEED_5G>;
};
phy2 {
phy-type = <COMPHY_TYPE_SFI>;
};
phy3 {
phy-type = <COMPHY_TYPE_SATA1>;
phy-speed = <COMPHY_SPEED_5G>;
};
phy4 {
phy-type = <COMPHY_TYPE_USB3_HOST1>;
phy-speed = <COMPHY_SPEED_5G>;
};
phy5 {
phy-type = <COMPHY_TYPE_PEX2>;
phy-speed = <COMPHY_SPEED_5G>;
};
};
&cp0_utmi0 {
status = "okay";
};
&cp0_utmi1 {
status = "okay";
};
&ap_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
};
&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
};
&cp0_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&cp0_ethernet {
status = "okay";
};
&cp0_eth0 {
status = "okay";
phy-mode = "sfi"; /* lane-2 */
};
&cp0_eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};