| /* |
| * board/renesas/koelsch/koelsch.c |
| * |
| * Copyright (C) 2013 Renesas Electronics Corporation |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| * |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <asm/processor.h> |
| #include <asm/mach-types.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/rmobile.h> |
| #include <netdev.h> |
| #include <miiphy.h> |
| #include <i2c.h> |
| #include "qos.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define s_init_wait(cnt) \ |
| ({ \ |
| u32 i = 0x10000 * cnt; \ |
| while (i > 0) \ |
| i--; \ |
| }) |
| |
| |
| #define dbpdrgd_check(bsc) \ |
| ({ \ |
| while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \ |
| ; \ |
| }) |
| |
| #if defined(CONFIG_NORFLASH) |
| static void bsc_init(void) |
| { |
| struct r8a7791_lbsc *lbsc = (struct r8a7791_lbsc *)LBSC_BASE; |
| struct r8a7791_dbsc3 *dbsc3_0 = (struct r8a7791_dbsc3 *)DBSC3_0_BASE; |
| |
| /* LBSC */ |
| writel(0x00000020, &lbsc->cs0ctrl); |
| writel(0x00000020, &lbsc->cs1ctrl); |
| writel(0x00002020, &lbsc->ecs0ctrl); |
| writel(0x00002020, &lbsc->ecs1ctrl); |
| |
| writel(0x077F077F, &lbsc->cswcr0); |
| writel(0x077F077F, &lbsc->cswcr1); |
| writel(0x077F077F, &lbsc->ecswcr0); |
| writel(0x077F077F, &lbsc->ecswcr1); |
| |
| /* DBSC3 */ |
| s_init_wait(10); |
| |
| writel(0x0000A55A, &dbsc3_0->dbpdlck); |
| writel(0x00000001, &dbsc3_0->dbpdrga); |
| writel(0x80000000, &dbsc3_0->dbpdrgd); |
| writel(0x00000004, &dbsc3_0->dbpdrga); |
| dbpdrgd_check(dbsc3_0); |
| |
| writel(0x00000006, &dbsc3_0->dbpdrga); |
| writel(0x0001C000, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000023, &dbsc3_0->dbpdrga); |
| writel(0x00FD2480, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000010, &dbsc3_0->dbpdrga); |
| writel(0xF004649B, &dbsc3_0->dbpdrgd); |
| |
| writel(0x0000000F, &dbsc3_0->dbpdrga); |
| writel(0x00181EE4, &dbsc3_0->dbpdrgd); |
| |
| writel(0x0000000E, &dbsc3_0->dbpdrga); |
| writel(0x33C03812, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000003, &dbsc3_0->dbpdrga); |
| writel(0x0300C481, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000007, &dbsc3_0->dbkind); |
| writel(0x10030A02, &dbsc3_0->dbconf0); |
| writel(0x00000001, &dbsc3_0->dbphytype); |
| writel(0x00000000, &dbsc3_0->dbbl); |
| writel(0x0000000B, &dbsc3_0->dbtr0); |
| writel(0x00000008, &dbsc3_0->dbtr1); |
| writel(0x00000000, &dbsc3_0->dbtr2); |
| writel(0x0000000B, &dbsc3_0->dbtr3); |
| writel(0x000C000B, &dbsc3_0->dbtr4); |
| writel(0x00000027, &dbsc3_0->dbtr5); |
| writel(0x0000001C, &dbsc3_0->dbtr6); |
| writel(0x00000005, &dbsc3_0->dbtr7); |
| writel(0x00000018, &dbsc3_0->dbtr8); |
| writel(0x00000008, &dbsc3_0->dbtr9); |
| writel(0x0000000C, &dbsc3_0->dbtr10); |
| writel(0x00000009, &dbsc3_0->dbtr11); |
| writel(0x00000012, &dbsc3_0->dbtr12); |
| writel(0x000000D0, &dbsc3_0->dbtr13); |
| writel(0x00140005, &dbsc3_0->dbtr14); |
| writel(0x00050004, &dbsc3_0->dbtr15); |
| writel(0x70233005, &dbsc3_0->dbtr16); |
| writel(0x000C0000, &dbsc3_0->dbtr17); |
| writel(0x00000300, &dbsc3_0->dbtr18); |
| writel(0x00000040, &dbsc3_0->dbtr19); |
| writel(0x00000001, &dbsc3_0->dbrnk0); |
| writel(0x00020001, &dbsc3_0->dbadj0); |
| writel(0x20082008, &dbsc3_0->dbadj2); |
| writel(0x00020002, &dbsc3_0->dbwt0cnf0); |
| writel(0x0000000F, &dbsc3_0->dbwt0cnf4); |
| |
| writel(0x00000015, &dbsc3_0->dbpdrga); |
| writel(0x00000D70, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000016, &dbsc3_0->dbpdrga); |
| writel(0x00000006, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000017, &dbsc3_0->dbpdrga); |
| writel(0x00000018, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000012, &dbsc3_0->dbpdrga); |
| writel(0x9D5CBB66, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000013, &dbsc3_0->dbpdrga); |
| writel(0x1A868300, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000023, &dbsc3_0->dbpdrga); |
| writel(0x00FDB6C0, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000014, &dbsc3_0->dbpdrga); |
| writel(0x300214D8, &dbsc3_0->dbpdrgd); |
| |
| writel(0x0000001A, &dbsc3_0->dbpdrga); |
| writel(0x930035C7, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000060, &dbsc3_0->dbpdrga); |
| writel(0x330657B2, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000011, &dbsc3_0->dbpdrga); |
| writel(0x1000040B, &dbsc3_0->dbpdrgd); |
| |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x00000001, &dbsc3_0->dbpdrga); |
| writel(0x00000071, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000004, &dbsc3_0->dbpdrga); |
| dbpdrgd_check(dbsc3_0); |
| |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x2100FA00, &dbsc3_0->dbcmd); |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| writel(0x0000FA00, &dbsc3_0->dbcmd); |
| |
| writel(0x110000DB, &dbsc3_0->dbcmd); |
| |
| writel(0x00000001, &dbsc3_0->dbpdrga); |
| writel(0x00000181, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000004, &dbsc3_0->dbpdrga); |
| dbpdrgd_check(dbsc3_0); |
| |
| writel(0x00000001, &dbsc3_0->dbpdrga); |
| writel(0x0000FE01, &dbsc3_0->dbpdrgd); |
| |
| writel(0x00000004, &dbsc3_0->dbpdrga); |
| dbpdrgd_check(dbsc3_0); |
| |
| writel(0x00000000, &dbsc3_0->dbbs0cnt1); |
| writel(0x01004C20, &dbsc3_0->dbcalcnf); |
| writel(0x014000AA, &dbsc3_0->dbcaltr); |
| writel(0x00000140, &dbsc3_0->dbrfcnf0); |
| writel(0x00081860, &dbsc3_0->dbrfcnf1); |
| writel(0x00010000, &dbsc3_0->dbrfcnf2); |
| writel(0x00000001, &dbsc3_0->dbrfen); |
| writel(0x00000001, &dbsc3_0->dbacen); |
| } |
| #else |
| #define bsc_init() do {} while (0) |
| #endif /* CONFIG_NORFLASH */ |
| |
| void s_init(void) |
| { |
| struct r8a7791_rwdt *rwdt = (struct r8a7791_rwdt *)RWDT_BASE; |
| struct r8a7791_swdt *swdt = (struct r8a7791_swdt *)SWDT_BASE; |
| |
| /* Watchdog init */ |
| writel(0xA5A5A500, &rwdt->rwtcsra); |
| writel(0xA5A5A500, &swdt->swtcsra); |
| |
| /* QoS */ |
| qos_init(); |
| |
| /* BSC */ |
| bsc_init(); |
| } |
| |
| #define MSTPSR1 0xE6150038 |
| #define SMSTPCR1 0xE6150134 |
| #define TMU0_MSTP125 (1 << 25) |
| |
| #define MSTPSR7 0xE61501C4 |
| #define SMSTPCR7 0xE615014C |
| #define SCIF0_MSTP721 (1 << 21) |
| |
| #define MSTPSR8 0xE61509A0 |
| #define SMSTPCR8 0xE6150990 |
| #define ETHER_MSTP813 (1 << 13) |
| |
| #define PMMR 0xE6060000 |
| #define GPSR4 0xE6060014 |
| #define IPSR14 0xE6060058 |
| |
| #define set_guard_reg(addr, mask, value) \ |
| { \ |
| u32 val; \ |
| val = (readl(addr) & ~(mask)) | (value); \ |
| writel(~val, PMMR); \ |
| writel(val, addr); \ |
| } |
| |
| #define mstp_setbits(type, addr, saddr, set) \ |
| out_##type((saddr), in_##type(addr) | (set)) |
| #define mstp_clrbits(type, addr, saddr, clear) \ |
| out_##type((saddr), in_##type(addr) & ~(clear)) |
| #define mstp_setbits_le32(addr, saddr, set) \ |
| mstp_setbits(le32, addr, saddr, set) |
| #define mstp_clrbits_le32(addr, saddr, clear) \ |
| mstp_clrbits(le32, addr, saddr, clear) |
| |
| int board_early_init_f(void) |
| { |
| mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); |
| |
| #if defined(CONFIG_NORFLASH) |
| /* SCIF0 */ |
| set_guard_reg(GPSR4, 0x34000000, 0x00000000); |
| set_guard_reg(IPSR14, 0x00000FC7, 0x00000481); |
| set_guard_reg(GPSR4, 0x00000000, 0x34000000); |
| #endif |
| |
| mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); |
| |
| /* ETHER */ |
| mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); |
| |
| return 0; |
| } |
| |
| void arch_preboot_os(void) |
| { |
| /* Disable TMU0 */ |
| mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); |
| } |
| |
| /* LSI pin pull-up control */ |
| #define PUPR5 0xe6060114 |
| #define PUPR5_ETH 0x3FFC0000 |
| #define PUPR5_ETH_MAGIC (1 << 27) |
| int board_init(void) |
| { |
| /* adress of boot parameters */ |
| gd->bd->bi_boot_params = KOELSCH_SDRAM_BASE + 0x100; |
| |
| /* Init PFC controller */ |
| r8a7791_pinmux_init(); |
| |
| /* ETHER Enable */ |
| gpio_request(GPIO_FN_ETH_CRS_DV, NULL); |
| gpio_request(GPIO_FN_ETH_RX_ER, NULL); |
| gpio_request(GPIO_FN_ETH_RXD0, NULL); |
| gpio_request(GPIO_FN_ETH_RXD1, NULL); |
| gpio_request(GPIO_FN_ETH_LINK, NULL); |
| gpio_request(GPIO_FN_ETH_REFCLK, NULL); |
| gpio_request(GPIO_FN_ETH_MDIO, NULL); |
| gpio_request(GPIO_FN_ETH_TXD1, NULL); |
| gpio_request(GPIO_FN_ETH_TX_EN, NULL); |
| gpio_request(GPIO_FN_ETH_TXD0, NULL); |
| gpio_request(GPIO_FN_ETH_MDC, NULL); |
| gpio_request(GPIO_FN_IRQ0, NULL); |
| |
| mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC); |
| gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */ |
| mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC); |
| |
| gpio_direction_output(GPIO_GP_5_22, 0); |
| mdelay(20); |
| gpio_set_value(GPIO_GP_5_22, 1); |
| udelay(1); |
| |
| return 0; |
| } |
| |
| #define CXR24 0xEE7003C0 /* MAC address high register */ |
| #define CXR25 0xEE7003C8 /* MAC address low register */ |
| int board_eth_init(bd_t *bis) |
| { |
| #ifdef CONFIG_SH_ETHER |
| int ret = -ENODEV; |
| u32 val; |
| unsigned char enetaddr[6]; |
| |
| ret = sh_eth_initialize(bis); |
| if (!eth_getenv_enetaddr("ethaddr", enetaddr)) |
| return ret; |
| |
| /* Set Mac address */ |
| val = enetaddr[0] << 24 | enetaddr[1] << 16 | |
| enetaddr[2] << 8 | enetaddr[3]; |
| writel(val, CXR24); |
| |
| val = enetaddr[4] << 8 | enetaddr[5]; |
| writel(val, CXR25); |
| |
| return ret; |
| #else |
| return 0; |
| #endif |
| } |
| |
| int dram_init(void) |
| { |
| gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; |
| gd->ram_size = CONFIG_SYS_SDRAM_SIZE; |
| |
| return 0; |
| } |
| |
| /* koelsch has KSZ8041NL/RNL */ |
| #define PHY_CONTROL1 0x1E |
| #define PHY_LED_MODE 0xC0000 |
| #define PHY_LED_MODE_ACK 0x4000 |
| int board_phy_config(struct phy_device *phydev) |
| { |
| int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1); |
| ret &= ~PHY_LED_MODE; |
| ret |= PHY_LED_MODE_ACK; |
| ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret); |
| |
| return 0; |
| } |
| |
| const struct rmobile_sysinfo sysinfo = { |
| CONFIG_RMOBILE_BOARD_STRING |
| }; |
| |
| void dram_init_banksize(void) |
| { |
| gd->bd->bi_dram[0].start = KOELSCH_SDRAM_BASE; |
| gd->bd->bi_dram[0].size = KOELSCH_SDRAM_SIZE; |
| } |
| |
| int board_late_init(void) |
| { |
| return 0; |
| } |
| |
| void reset_cpu(ulong addr) |
| { |
| u8 val; |
| |
| i2c_set_bus_num(2); /* PowerIC connected to ch2 */ |
| i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); |
| val |= 0x02; |
| i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); |
| } |