| /* |
| * Copyright (c) 2004 Picture Elements, Inc. |
| * Stephen Williams (steve@icarus.com) |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/ppc4xx.h> |
| #include <asm/processor.h> |
| |
| # define SDRAM_LEN 0x08000000 |
| |
| /* |
| * this is even after checkboard. It returns the size of the SDRAM |
| * that we have installed. This function is called by board_init_f |
| * in arch/powerpc/lib/board.c to initialize the memory and return what I |
| * found. |
| */ |
| phys_size_t initdram (int board_type) |
| { |
| /* Configure the SDRAMS */ |
| |
| /* disable memory controller */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); |
| mtdcr (SDRAM0_CFGDATA, 0x00000000); |
| |
| udelay (500); |
| |
| /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR0); |
| mtdcr (SDRAM0_CFGDATA, 0xffffffff); |
| |
| /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR1); |
| mtdcr (SDRAM0_CFGDATA, 0xffffffff); |
| |
| /* Clear SDRAM0_ECCCFG (disable ECC) */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG); |
| mtdcr (SDRAM0_CFGDATA, 0x00000000); |
| |
| /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCESR); |
| mtdcr (SDRAM0_CFGDATA, 0xffffffff); |
| |
| /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); |
| mtdcr (SDRAM0_CFGDATA, 0x010a4016); |
| |
| /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); |
| mtdcr (SDRAM0_CFGDATA, 0x00084001); |
| |
| /* Memory Bank 1 Config == BA=0x04000000, SZ=64M, AM=3, BE=1 */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); |
| mtdcr (SDRAM0_CFGDATA, 0x04084001); |
| |
| /* Memory Bank 2 Config == BE=0 */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); |
| mtdcr (SDRAM0_CFGDATA, 0x00000000); |
| |
| /* Memory Bank 3 Config == BE=0 */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); |
| mtdcr (SDRAM0_CFGDATA, 0x00000000); |
| |
| /* refresh timer = 0x400 */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); |
| mtdcr (SDRAM0_CFGDATA, 0x04000000); |
| |
| /* Power management idle timer set to the default. */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_PMIT); |
| mtdcr (SDRAM0_CFGDATA, 0x07c00000); |
| |
| udelay (500); |
| |
| /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) */ |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); |
| mtdcr (SDRAM0_CFGDATA, 0x80e00000); |
| |
| return SDRAM_LEN; |
| } |
| |
| /* |
| * The U-Boot core, as part of the initialization to prepare for |
| * loading the monitor into SDRAM, requests of this function that the |
| * memory be tested. Return 0 if the memory tests OK. |
| */ |
| int testdram (void) |
| { |
| unsigned long idx; |
| unsigned val; |
| unsigned errors; |
| volatile unsigned long *sdram; |
| |
| #ifdef DEBUG |
| printf ("SDRAM Controller Registers --\n"); |
| |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG); |
| val = mfdcr (SDRAM0_CFGDATA); |
| printf (" SDRAM0_CFG : 0x%08x\n", val); |
| |
| mtdcr (SDRAM0_CFGADDR, 0x24); |
| val = mfdcr (SDRAM0_CFGDATA); |
| printf (" SDRAM0_STATUS: 0x%08x\n", val); |
| |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); |
| val = mfdcr (SDRAM0_CFGDATA); |
| printf (" SDRAM0_B0CR : 0x%08x\n", val); |
| |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); |
| val = mfdcr (SDRAM0_CFGDATA); |
| printf (" SDRAM0_B1CR : 0x%08x\n", val); |
| |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_TR); |
| val = mfdcr (SDRAM0_CFGDATA); |
| printf (" SDRAM0_TR : 0x%08x\n", val); |
| |
| mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR); |
| val = mfdcr (SDRAM0_CFGDATA); |
| printf (" SDRAM0_RTR : 0x%08x\n", val); |
| #endif |
| |
| /* Wait for memory to be ready by testing MRSCMPbit |
| bit. Really, there should already have been plenty of time, |
| given it was started long ago. But, best to check. */ |
| for (idx = 0; idx < 1000000; idx += 1) { |
| mtdcr (SDRAM0_CFGADDR, 0x24); |
| val = mfdcr (SDRAM0_CFGDATA); |
| if (val & 0x80000000) |
| break; |
| } |
| |
| if (!(val & 0x80000000)) { |
| printf ("SDRAM ERROR: SDRAM0_STATUS never set!\n"); |
| return 1; |
| } |
| |
| /* Start memory test. */ |
| printf ("test: %u MB - ", SDRAM_LEN / 1048576); |
| |
| sdram = (unsigned long *) CONFIG_SYS_SDRAM_BASE; |
| |
| printf ("write - "); |
| for (idx = 2; idx < SDRAM_LEN / 4; idx += 2) { |
| sdram[idx + 0] = idx; |
| sdram[idx + 1] = ~idx; |
| } |
| |
| printf ("read - "); |
| errors = 0; |
| for (idx = 2; idx < SDRAM_LEN / 4; idx += 2) { |
| if (sdram[idx + 0] != idx) |
| errors += 1; |
| if (sdram[idx + 1] != ~idx) |
| errors += 1; |
| if (errors > 0) |
| break; |
| } |
| |
| if (errors > 0) { |
| printf ("NOT OK\n"); |
| printf ("FIRST ERROR at %p: 0x%08lx:0x%08lx != 0x%08lx:0x%08lx\n", |
| sdram + idx, sdram[idx + 0], sdram[idx + 1], idx, ~idx); |
| return 1; |
| } |
| |
| printf ("ok\n"); |
| return 0; |
| } |