| /* |
| * (C) Copyright 2001 |
| * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/ppc4xx.h> |
| #include <asm/processor.h> |
| |
| /* |
| * include common flash code (for esd boards) |
| */ |
| #include "../common/flash.c" |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| static ulong flash_get_size (vu_long * addr, flash_info_t * info); |
| static void flash_get_offsets (ulong base, flash_info_t * info); |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long flash_init (void) |
| { |
| unsigned long size_b0, size_b1; |
| int i; |
| uint pbcr; |
| unsigned long base_b0, base_b1; |
| int size_val = 0; |
| |
| /* Init: no FLASHes known */ |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| } |
| |
| /* Static FLASH Bank configuration here - FIXME XXX */ |
| |
| base_b0 = FLASH_BASE0_PRELIM; |
| size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]); |
| |
| if (flash_info[0].flash_id == FLASH_UNKNOWN) { |
| printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", |
| size_b0, size_b0 << 20); |
| } |
| |
| base_b1 = FLASH_BASE1_PRELIM; |
| size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]); |
| |
| /* Re-do sizing to get full correct info */ |
| |
| if (size_b1) { |
| mtdcr (EBC0_CFGADDR, PB0CR); |
| pbcr = mfdcr (EBC0_CFGDATA); |
| mtdcr (EBC0_CFGADDR, PB0CR); |
| base_b1 = -size_b1; |
| switch (size_b1) { |
| case 1 << 20: |
| size_val = 0; |
| break; |
| case 2 << 20: |
| size_val = 1; |
| break; |
| case 4 << 20: |
| size_val = 2; |
| break; |
| case 8 << 20: |
| size_val = 3; |
| break; |
| case 16 << 20: |
| size_val = 4; |
| break; |
| } |
| pbcr = (pbcr & 0x0001ffff) | base_b1 | (size_val << 17); |
| mtdcr (EBC0_CFGDATA, pbcr); |
| /* printf("PB1CR = %x\n", pbcr); */ |
| } |
| |
| if (size_b0) { |
| mtdcr (EBC0_CFGADDR, PB1CR); |
| pbcr = mfdcr (EBC0_CFGDATA); |
| mtdcr (EBC0_CFGADDR, PB1CR); |
| base_b0 = base_b1 - size_b0; |
| switch (size_b1) { |
| case 1 << 20: |
| size_val = 0; |
| break; |
| case 2 << 20: |
| size_val = 1; |
| break; |
| case 4 << 20: |
| size_val = 2; |
| break; |
| case 8 << 20: |
| size_val = 3; |
| break; |
| case 16 << 20: |
| size_val = 4; |
| break; |
| } |
| pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); |
| mtdcr (EBC0_CFGDATA, pbcr); |
| /* printf("PB0CR = %x\n", pbcr); */ |
| } |
| |
| size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]); |
| |
| flash_get_offsets (base_b0, &flash_info[0]); |
| |
| /* monitor protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| base_b0 + size_b0 - monitor_flash_len, |
| base_b0 + size_b0 - 1, &flash_info[0]); |
| |
| if (size_b1) { |
| /* Re-do sizing to get full correct info */ |
| size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]); |
| |
| flash_get_offsets (base_b1, &flash_info[1]); |
| |
| /* monitor protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| base_b1 + size_b1 - monitor_flash_len, |
| base_b1 + size_b1 - 1, &flash_info[1]); |
| /* monitor protection OFF by default (one is enough) */ |
| flash_protect (FLAG_PROTECT_CLEAR, |
| base_b0 + size_b0 - monitor_flash_len, |
| base_b0 + size_b0 - 1, &flash_info[0]); |
| } else { |
| flash_info[1].flash_id = FLASH_UNKNOWN; |
| flash_info[1].sector_count = -1; |
| } |
| |
| flash_info[0].size = size_b0; |
| flash_info[1].size = size_b1; |
| |
| return (size_b0 + size_b1); |
| } |