| /* |
| * Copyright (C) 2013 Samsung Electronics |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <fdtdec.h> |
| #include <asm/io.h> |
| #include <i2c.h> |
| #include <lcd.h> |
| #include <spi.h> |
| #include <asm/arch/board.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/dp_info.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_USB_EHCI_EXYNOS |
| static int board_usb_vbus_init(void) |
| { |
| /* Enable VBUS power switch */ |
| gpio_direction_output(EXYNOS5420_GPIO_X26, 1); |
| |
| /* VBUS turn ON time */ |
| mdelay(3); |
| |
| return 0; |
| } |
| #endif |
| |
| int exynos_init(void) |
| { |
| #ifdef CONFIG_USB_EHCI_EXYNOS |
| board_usb_vbus_init(); |
| #endif |
| return 0; |
| } |
| |
| #ifdef CONFIG_LCD |
| void cfg_lcd_gpio(void) |
| { |
| struct exynos5_gpio_part1 *gpio1 = |
| (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1(); |
| |
| /* For Backlight */ |
| gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_OUTPUT); |
| gpio_set_value(EXYNOS5420_GPIO_B20, 1); |
| |
| /* LCD power on */ |
| gpio_cfg_pin(EXYNOS5420_GPIO_X15, S5P_GPIO_OUTPUT); |
| gpio_set_value(EXYNOS5420_GPIO_X15, 1); |
| |
| /* Set Hotplug detect for DP */ |
| gpio_cfg_pin(EXYNOS5420_GPIO_X07, S5P_GPIO_FUNC(0x3)); |
| } |
| |
| vidinfo_t panel_info = { |
| .vl_freq = 60, |
| .vl_col = 2560, |
| .vl_row = 1600, |
| .vl_width = 2560, |
| .vl_height = 1600, |
| .vl_clkp = CONFIG_SYS_LOW, |
| .vl_hsp = CONFIG_SYS_LOW, |
| .vl_vsp = CONFIG_SYS_LOW, |
| .vl_dp = CONFIG_SYS_LOW, |
| .vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */ |
| |
| /* wDP panel timing infomation */ |
| .vl_hspw = 32, |
| .vl_hbpd = 80, |
| .vl_hfpd = 48, |
| |
| .vl_vspw = 6, |
| .vl_vbpd = 37, |
| .vl_vfpd = 3, |
| .vl_cmd_allow_len = 0xf, |
| |
| .win_id = 3, |
| .cfg_gpio = cfg_lcd_gpio, |
| .backlight_on = NULL, |
| .lcd_power_on = NULL, |
| .reset_lcd = NULL, |
| .dual_lcd_enabled = 0, |
| |
| .init_delay = 0, |
| .power_on_delay = 0, |
| .reset_delay = 0, |
| .interface_mode = FIMD_RGB_INTERFACE, |
| .dp_enabled = 1, |
| }; |
| |
| static struct edp_device_info edp_info = { |
| .disp_info = { |
| .h_res = 2560, |
| .h_sync_width = 32, |
| .h_back_porch = 80, |
| .h_front_porch = 48, |
| .v_res = 1600, |
| .v_sync_width = 6, |
| .v_back_porch = 37, |
| .v_front_porch = 3, |
| .v_sync_rate = 60, |
| }, |
| .lt_info = { |
| .lt_status = DP_LT_NONE, |
| }, |
| .video_info = { |
| .master_mode = 0, |
| .bist_mode = DP_DISABLE, |
| .bist_pattern = NO_PATTERN, |
| .h_sync_polarity = 0, |
| .v_sync_polarity = 0, |
| .interlaced = 0, |
| .color_space = COLOR_RGB, |
| .dynamic_range = VESA, |
| .ycbcr_coeff = COLOR_YCBCR601, |
| .color_depth = COLOR_8, |
| }, |
| }; |
| |
| static struct exynos_dp_platform_data dp_platform_data = { |
| .phy_enable = set_dp_phy_ctrl, |
| .edp_dev_info = &edp_info, |
| }; |
| |
| void init_panel_info(vidinfo_t *vid) |
| { |
| vid->rgb_mode = MODE_RGB_P; |
| |
| exynos_set_dp_platform_data(&dp_platform_data); |
| } |
| #endif |
| |
| int board_get_revision(void) |
| { |
| return 0; |
| } |