blob: 53621252330f4923a43c0876745c3348a3e3637e [file] [log] [blame]
/*----------------------------------------------------------------------------+
| This source code is dual-licensed. You may use it under the terms of the
| GNU General Public License version 2, or under the license below.
|
| This source code has been made available to you by IBM on an AS-IS
| basis. Anyone receiving this source is licensed under IBM
| copyrights to use it in any way he or she deems fit, including
| copying it, modifying it, compiling it, and redistributing it either
| with or without modifications. No license under IBM patents or
| patent applications is to be implied by the copyright license.
|
| Any user of this software should understand that IBM cannot provide
| technical support for this software and will not be responsible for
| any consequences resulting from the use of this software.
|
| Any person who transfers this source code or any derivative work
| must include the IBM copyright notice, this paragraph, and the
| preceding two paragraphs in the transferred software.
|
| COPYRIGHT I B M CORPORATION 1999
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
| Additions (C) Copyright 2009 Industrie Dial Face S.p.A.
+----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------+
|
| File Name: miiphy.h
|
| Function: Include file defining PHY registers.
|
| Author: Mark Wisner
|
+----------------------------------------------------------------------------*/
#ifndef _miiphy_h_
#define _miiphy_h_
#include <net.h>
int miiphy_read (char *devname, unsigned char addr, unsigned char reg,
unsigned short *value);
int miiphy_write (char *devname, unsigned char addr, unsigned char reg,
unsigned short value);
int miiphy_info (char *devname, unsigned char addr, unsigned int *oui,
unsigned char *model, unsigned char *rev);
int miiphy_reset (char *devname, unsigned char addr);
int miiphy_speed (char *devname, unsigned char addr);
int miiphy_duplex (char *devname, unsigned char addr);
int miiphy_is_1000base_x (char *devname, unsigned char addr);
#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
int miiphy_link (char *devname, unsigned char addr);
#endif
void miiphy_init (void);
void miiphy_register (char *devname,
int (*read) (char *devname, unsigned char addr,
unsigned char reg, unsigned short *value),
int (*write) (char *devname, unsigned char addr,
unsigned char reg, unsigned short value));
int miiphy_set_current_dev (char *devname);
char *miiphy_get_current_dev (void);
void miiphy_listdev (void);
#ifdef CONFIG_BITBANGMII
#define BB_MII_DEVNAME "bb_miiphy"
struct bb_miiphy_bus {
char name[NAMESIZE];
int (*init)(struct bb_miiphy_bus *bus);
int (*mdio_active)(struct bb_miiphy_bus *bus);
int (*mdio_tristate)(struct bb_miiphy_bus *bus);
int (*set_mdio)(struct bb_miiphy_bus *bus, int v);
int (*get_mdio)(struct bb_miiphy_bus *bus, int *v);
int (*set_mdc)(struct bb_miiphy_bus *bus, int v);
int (*delay)(struct bb_miiphy_bus *bus);
#ifdef CONFIG_BITBANGMII_MULTI
void *priv;
#endif
};
extern struct bb_miiphy_bus bb_miiphy_buses[];
extern int bb_miiphy_buses_num;
void bb_miiphy_init (void);
int bb_miiphy_read (char *devname, unsigned char addr,
unsigned char reg, unsigned short *value);
int bb_miiphy_write (char *devname, unsigned char addr,
unsigned char reg, unsigned short value);
#endif
/* phy seed setup */
#define AUTO 99
#define _1000BASET 1000
#define _100BASET 100
#define _10BASET 10
#define HALF 22
#define FULL 44
/* phy register offsets */
#define PHY_BMCR 0x00
#define PHY_BMSR 0x01
#define PHY_PHYIDR1 0x02
#define PHY_PHYIDR2 0x03
#define PHY_ANAR 0x04
#define PHY_ANLPAR 0x05
#define PHY_ANER 0x06
#define PHY_ANNPTR 0x07
#define PHY_ANLPNP 0x08
#define PHY_1000BTCR 0x09
#define PHY_1000BTSR 0x0A
#define PHY_EXSR 0x0F
#define PHY_PHYSTS 0x10
#define PHY_MIPSCR 0x11
#define PHY_MIPGSR 0x12
#define PHY_DCR 0x13
#define PHY_FCSCR 0x14
#define PHY_RECR 0x15
#define PHY_PCSR 0x16
#define PHY_LBR 0x17
#define PHY_10BTSCR 0x18
#define PHY_PHYCTRL 0x19
/* PHY BMCR */
#define PHY_BMCR_RESET 0x8000
#define PHY_BMCR_LOOP 0x4000
#define PHY_BMCR_100MB 0x2000
#define PHY_BMCR_AUTON 0x1000
#define PHY_BMCR_POWD 0x0800
#define PHY_BMCR_ISO 0x0400
#define PHY_BMCR_RST_NEG 0x0200
#define PHY_BMCR_DPLX 0x0100
#define PHY_BMCR_COL_TST 0x0080
#define PHY_BMCR_SPEED_MASK 0x2040
#define PHY_BMCR_1000_MBPS 0x0040
#define PHY_BMCR_100_MBPS 0x2000
#define PHY_BMCR_10_MBPS 0x0000
/* phy BMSR */
#define PHY_BMSR_100T4 0x8000
#define PHY_BMSR_100TXF 0x4000
#define PHY_BMSR_100TXH 0x2000
#define PHY_BMSR_10TF 0x1000
#define PHY_BMSR_10TH 0x0800
#define PHY_BMSR_EXT_STAT 0x0100
#define PHY_BMSR_PRE_SUP 0x0040
#define PHY_BMSR_AUTN_COMP 0x0020
#define PHY_BMSR_RF 0x0010
#define PHY_BMSR_AUTN_ABLE 0x0008
#define PHY_BMSR_LS 0x0004
#define PHY_BMSR_JD 0x0002
#define PHY_BMSR_EXT 0x0001
/*phy ANLPAR */
#define PHY_ANLPAR_NP 0x8000
#define PHY_ANLPAR_ACK 0x4000
#define PHY_ANLPAR_RF 0x2000
#define PHY_ANLPAR_ASYMP 0x0800
#define PHY_ANLPAR_PAUSE 0x0400
#define PHY_ANLPAR_T4 0x0200
#define PHY_ANLPAR_TXFD 0x0100
#define PHY_ANLPAR_TX 0x0080
#define PHY_ANLPAR_10FD 0x0040
#define PHY_ANLPAR_10 0x0020
#define PHY_ANLPAR_100 0x0380 /* we can run at 100 */
/* phy ANLPAR 1000BASE-X */
#define PHY_X_ANLPAR_NP 0x8000
#define PHY_X_ANLPAR_ACK 0x4000
#define PHY_X_ANLPAR_RF_MASK 0x3000
#define PHY_X_ANLPAR_PAUSE_MASK 0x0180
#define PHY_X_ANLPAR_HD 0x0040
#define PHY_X_ANLPAR_FD 0x0020
#define PHY_ANLPAR_PSB_MASK 0x001f
#define PHY_ANLPAR_PSB_802_3 0x0001
#define PHY_ANLPAR_PSB_802_9 0x0002
/* phy 1000BTCR */
#define PHY_1000BTCR_1000FD 0x0200
#define PHY_1000BTCR_1000HD 0x0100
/* phy 1000BTSR */
#define PHY_1000BTSR_MSCF 0x8000
#define PHY_1000BTSR_MSCR 0x4000
#define PHY_1000BTSR_LRS 0x2000
#define PHY_1000BTSR_RRS 0x1000
#define PHY_1000BTSR_1000FD 0x0800
#define PHY_1000BTSR_1000HD 0x0400
/* phy EXSR */
#define PHY_EXSR_1000XF 0x8000
#define PHY_EXSR_1000XH 0x4000
#define PHY_EXSR_1000TF 0x2000
#define PHY_EXSR_1000TH 0x1000
#endif