| /* |
| * (C) Copyright 2014 |
| * Andreas Bießmann <andreas@biessmann.org> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include "imagetool.h" |
| #include "mkimage.h" |
| |
| #include <image.h> |
| |
| #define pr_err(fmt, args...) fprintf(stderr, "atmelimage Error: " fmt, ##args) |
| |
| static int atmel_check_image_type(uint8_t type) |
| { |
| if (type == IH_TYPE_ATMELIMAGE) |
| return EXIT_SUCCESS; |
| else |
| return EXIT_FAILURE; |
| } |
| |
| static uint32_t nand_pmecc_header[52]; |
| |
| /* |
| * A helper struct for parsing the mkimage -n parameter |
| * |
| * Keep in same order as the configs array! |
| */ |
| static struct pmecc_config { |
| int use_pmecc; |
| int sector_per_page; |
| int spare_size; |
| int ecc_bits; |
| int sector_size; |
| int ecc_offset; |
| } pmecc; |
| |
| /* |
| * Strings used for configure the PMECC header via -n mkimage switch |
| * |
| * We estimate a coma separated list of key=value pairs. The mkimage -n |
| * parameter argument should not contain any whitespace. |
| * |
| * Keep in same order as struct pmecc_config! |
| */ |
| static const char * const configs[] = { |
| "usePmecc", |
| "sectorPerPage", |
| "spareSize", |
| "eccBits", |
| "sectorSize", |
| "eccOffset" |
| }; |
| |
| static int atmel_find_pmecc_parameter_in_token(const char *token) |
| { |
| size_t pos; |
| char *param; |
| |
| debug("token: '%s'\n", token); |
| |
| for (pos = 0; pos < ARRAY_SIZE(configs); pos++) { |
| if (strncmp(token, configs[pos], strlen(configs[pos])) == 0) { |
| param = strstr(token, "="); |
| if (!param) |
| goto err; |
| |
| param++; |
| debug("\t%s parameter: '%s'\n", configs[pos], param); |
| |
| switch (pos) { |
| case 0: |
| pmecc.use_pmecc = strtol(param, NULL, 10); |
| return EXIT_SUCCESS; |
| case 1: |
| pmecc.sector_per_page = strtol(param, NULL, 10); |
| return EXIT_SUCCESS; |
| case 2: |
| pmecc.spare_size = strtol(param, NULL, 10); |
| return EXIT_SUCCESS; |
| case 3: |
| pmecc.ecc_bits = strtol(param, NULL, 10); |
| return EXIT_SUCCESS; |
| case 4: |
| pmecc.sector_size = strtol(param, NULL, 10); |
| return EXIT_SUCCESS; |
| case 5: |
| pmecc.ecc_offset = strtol(param, NULL, 10); |
| return EXIT_SUCCESS; |
| } |
| } |
| } |
| |
| err: |
| pr_err("Could not find parameter in token '%s'\n", token); |
| return EXIT_FAILURE; |
| } |
| |
| static int atmel_parse_pmecc_params(char *txt) |
| { |
| char *token; |
| |
| token = strtok(txt, ","); |
| while (token != NULL) { |
| if (atmel_find_pmecc_parameter_in_token(token)) |
| return EXIT_FAILURE; |
| |
| token = strtok(NULL, ","); |
| } |
| |
| return EXIT_SUCCESS; |
| } |
| |
| static int atmel_verify_header(unsigned char *ptr, int image_size, |
| struct image_tool_params *params) |
| { |
| uint32_t *ints = (uint32_t *)ptr; |
| size_t pos; |
| size_t size = image_size; |
| |
| /* check if we have an PMECC header attached */ |
| for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) |
| if (ints[pos] >> 28 != 0xC) |
| break; |
| |
| if (pos == ARRAY_SIZE(nand_pmecc_header)) { |
| ints += ARRAY_SIZE(nand_pmecc_header); |
| size -= sizeof(nand_pmecc_header); |
| } |
| |
| /* check the seven interrupt vectors of binary */ |
| for (pos = 0; pos < 7; pos++) { |
| debug("atmelimage: interrupt vector #%zu is 0x%08X\n", pos+1, |
| ints[pos]); |
| /* |
| * all vectors except the 6'th one must contain valid |
| * LDR or B Opcode |
| */ |
| if (pos == 5) |
| /* 6'th vector has image size set, check later */ |
| continue; |
| if ((ints[pos] & 0xff000000) == 0xea000000) |
| /* valid B Opcode */ |
| continue; |
| if ((ints[pos] & 0xfffff000) == 0xe59ff000) |
| /* valid LDR (I=0, P=1, U=1, B=0, W=0, L=1) */ |
| continue; |
| /* ouch, one of the checks has missed ... */ |
| return 1; |
| } |
| |
| return ints[5] != cpu_to_le32(size); |
| } |
| |
| static void atmel_print_pmecc_header(const uint32_t word) |
| { |
| int val; |
| |
| printf("\t\tPMECC header\n"); |
| |
| printf("\t\t====================\n"); |
| |
| val = (word >> 18) & 0x1ff; |
| printf("\t\teccOffset: %9i\n", val); |
| |
| val = (((word >> 16) & 0x3) == 0) ? 512 : 1024; |
| printf("\t\tsectorSize: %8i\n", val); |
| |
| if (((word >> 13) & 0x7) <= 2) |
| val = (2 << ((word >> 13) & 0x7)); |
| else |
| val = (12 << (((word >> 13) & 0x7) - 3)); |
| printf("\t\teccBitReq: %9i\n", val); |
| |
| val = (word >> 4) & 0x1ff; |
| printf("\t\tspareSize: %9i\n", val); |
| |
| val = (1 << ((word >> 1) & 0x3)); |
| printf("\t\tnbSectorPerPage: %3i\n", val); |
| |
| printf("\t\tusePmecc: %10i\n", word & 0x1); |
| printf("\t\t====================\n"); |
| } |
| |
| static void atmel_print_header(const void *ptr) |
| { |
| uint32_t *ints = (uint32_t *)ptr; |
| size_t pos; |
| |
| /* check if we have an PMECC header attached */ |
| for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) |
| if (ints[pos] >> 28 != 0xC) |
| break; |
| |
| if (pos == ARRAY_SIZE(nand_pmecc_header)) { |
| printf("Image Type:\tATMEL ROM-Boot Image with PMECC Header\n"); |
| atmel_print_pmecc_header(ints[0]); |
| pos += 5; |
| } else { |
| printf("Image Type:\tATMEL ROM-Boot Image without PMECC Header\n"); |
| pos = 5; |
| } |
| printf("\t\t6'th vector has %u set\n", le32_to_cpu(ints[pos])); |
| } |
| |
| static void atmel_set_header(void *ptr, struct stat *sbuf, int ifd, |
| struct image_tool_params *params) |
| { |
| /* just save the image size into 6'th interrupt vector */ |
| uint32_t *ints = (uint32_t *)ptr; |
| size_t cnt; |
| size_t pos = 5; |
| size_t size = sbuf->st_size; |
| |
| for (cnt = 0; cnt < ARRAY_SIZE(nand_pmecc_header); cnt++) |
| if (ints[cnt] >> 28 != 0xC) |
| break; |
| |
| if (cnt == ARRAY_SIZE(nand_pmecc_header)) { |
| pos += ARRAY_SIZE(nand_pmecc_header); |
| size -= sizeof(nand_pmecc_header); |
| } |
| |
| ints[pos] = cpu_to_le32(size); |
| } |
| |
| static int atmel_check_params(struct image_tool_params *params) |
| { |
| if (strlen(params->imagename) > 0) |
| if (atmel_parse_pmecc_params(params->imagename)) |
| return EXIT_FAILURE; |
| |
| return !(!params->eflag && |
| !params->fflag && |
| !params->xflag && |
| ((params->dflag && !params->lflag) || |
| (params->lflag && !params->dflag))); |
| } |
| |
| static int atmel_vrec_header(struct image_tool_params *params, |
| struct image_type_params *tparams) |
| { |
| uint32_t tmp; |
| size_t pos; |
| |
| if (strlen(params->imagename) == 0) |
| return EXIT_SUCCESS; |
| |
| tmp = 0xC << 28; |
| |
| tmp |= (pmecc.ecc_offset & 0x1ff) << 18; |
| |
| switch (pmecc.sector_size) { |
| case 512: |
| tmp |= 0 << 16; |
| break; |
| case 1024: |
| tmp |= 1 << 16; |
| break; |
| |
| default: |
| pr_err("Wrong sectorSize (%i) for PMECC header\n", |
| pmecc.sector_size); |
| return EXIT_FAILURE; |
| } |
| |
| switch (pmecc.ecc_bits) { |
| case 2: |
| tmp |= 0 << 13; |
| break; |
| case 4: |
| tmp |= 1 << 13; |
| break; |
| case 8: |
| tmp |= 2 << 13; |
| break; |
| case 12: |
| tmp |= 3 << 13; |
| break; |
| case 24: |
| tmp |= 4 << 13; |
| break; |
| |
| default: |
| pr_err("Wrong eccBits (%i) for PMECC header\n", |
| pmecc.ecc_bits); |
| return EXIT_FAILURE; |
| } |
| |
| tmp |= (pmecc.spare_size & 0x1ff) << 4; |
| |
| switch (pmecc.sector_per_page) { |
| case 1: |
| tmp |= 0 << 1; |
| break; |
| case 2: |
| tmp |= 1 << 1; |
| break; |
| case 4: |
| tmp |= 2 << 1; |
| break; |
| case 8: |
| tmp |= 3 << 1; |
| break; |
| |
| default: |
| pr_err("Wrong sectorPerPage (%i) for PMECC header\n", |
| pmecc.sector_per_page); |
| return EXIT_FAILURE; |
| } |
| |
| if (pmecc.use_pmecc) |
| tmp |= 1; |
| |
| for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++) |
| nand_pmecc_header[pos] = tmp; |
| |
| debug("PMECC header filled 52 times with 0x%08X\n", tmp); |
| |
| tparams->header_size = sizeof(nand_pmecc_header); |
| tparams->hdr = nand_pmecc_header; |
| |
| return EXIT_SUCCESS; |
| } |
| |
| U_BOOT_IMAGE_TYPE( |
| atmelimage, |
| "ATMEL ROM-Boot Image support", |
| 0, |
| NULL, |
| atmel_check_params, |
| atmel_verify_header, |
| atmel_print_header, |
| atmel_set_header, |
| NULL, |
| atmel_check_image_type, |
| NULL, |
| atmel_vrec_header |
| ); |