| /* |
| * (C) Copyright 2014 |
| * Texas Instruments Incorporated. |
| * Felipe Balbi <balbi@ti.com> |
| * |
| * Configuration settings for the TI Beagle x15 board. |
| * See ti_omap5_common.h for omap5 common settings. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_AM57XX_EVM_H |
| #define __CONFIG_AM57XX_EVM_H |
| |
| #define CONFIG_AM57XX |
| |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_IODELAY_RECALIBRATION |
| #endif |
| |
| #define CONFIG_BOARD_EARLY_INIT_F |
| |
| #define CONFIG_NR_DRAM_BANKS 2 |
| |
| #define CONFIG_ENV_SIZE (64 << 10) |
| #define CONFIG_ENV_IS_IN_FAT |
| #define FAT_ENV_INTERFACE "mmc" |
| #define FAT_ENV_DEVICE_AND_PART "0:1" |
| #define FAT_ENV_FILE "uboot.env" |
| |
| #define CONSOLEDEV "ttyO2" |
| #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ |
| #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ |
| #define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ |
| #define CONFIG_BAUDRATE 115200 |
| |
| #define CONFIG_SYS_OMAP_ABE_SYSCK |
| |
| /* Define the default GPT table for eMMC */ |
| #define PARTS_DEFAULT \ |
| "uuid_disk=${uuid_gpt_disk};" \ |
| "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" |
| |
| #include <configs/ti_omap5_common.h> |
| |
| /* Enhance our eMMC support / experience. */ |
| #define CONFIG_CMD_GPT |
| #define CONFIG_EFI_PARTITION |
| |
| /* CPSW Ethernet */ |
| #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ |
| #define CONFIG_BOOTP_DNS2 |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_NET_RETRY_COUNT 10 |
| #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ |
| #define CONFIG_MII /* Required in net/eth.c */ |
| #define CONFIG_PHY_GIGE /* per-board part of CPSW */ |
| #define CONFIG_PHYLIB |
| #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ |
| |
| #define CONFIG_SUPPORT_EMMC_BOOT |
| |
| /* USB xHCI HOST */ |
| #define CONFIG_USB_XHCI_OMAP |
| #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 |
| |
| #define CONFIG_OMAP_USB_PHY |
| #define CONFIG_OMAP_USB3PHY1_HOST |
| |
| /* SATA */ |
| #define CONFIG_BOARD_LATE_INIT |
| #define CONFIG_SCSI |
| #define CONFIG_LIBATA |
| #define CONFIG_SCSI_AHCI |
| #define CONFIG_SCSI_AHCI_PLAT |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| CONFIG_SYS_SCSI_MAX_LUN) |
| |
| /* EEPROM */ |
| #define CONFIG_EEPROM_CHIP_ADDRESS 0x50 |
| #define CONFIG_EEPROM_BUS_ADDRESS 0 |
| |
| /* |
| * Default to using SPI for environment, etc. |
| * 0x000000 - 0x040000 : QSPI.SPL (256KiB) |
| * 0x040000 - 0x140000 : QSPI.u-boot (1MiB) |
| * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB) |
| * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB) |
| * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB) |
| * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) |
| * 0x9E0000 - 0x2000000 : USERLAND |
| */ |
| #define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 |
| #define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 |
| #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 |
| |
| #ifdef CONFIG_SPL_BUILD |
| #undef CONFIG_DM_SPI |
| #undef CONFIG_DM_SPI_FLASH |
| #endif |
| |
| /* SPI SPL */ |
| #define CONFIG_SPL_SPI_SUPPORT |
| #define CONFIG_TI_EDMA3 |
| #define CONFIG_SPL_SPI_LOAD |
| #define CONFIG_SPL_SPI_FLASH_SUPPORT |
| #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 |
| |
| /* SPI */ |
| #undef CONFIG_OMAP3_SPI |
| #define CONFIG_TI_SPI_MMAP |
| #define CONFIG_SF_DEFAULT_SPEED 76800000 |
| #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 |
| #define CONFIG_QSPI_QUAD_SUPPORT |
| |
| #endif /* __CONFIG_AM57XX_EVM_H */ |