| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef _I915_REG_H_ |
| #define _I915_REG_H_ |
| |
| /* Hotplug control (945+ only) */ |
| #define PORT_HOTPLUG_EN 0x61110 |
| #define HDMIB_HOTPLUG_INT_EN (1 << 29) |
| #define DPB_HOTPLUG_INT_EN (1 << 29) |
| #define HDMIC_HOTPLUG_INT_EN (1 << 28) |
| #define DPC_HOTPLUG_INT_EN (1 << 28) |
| #define HDMID_HOTPLUG_INT_EN (1 << 27) |
| #define DPD_HOTPLUG_INT_EN (1 << 27) |
| #define SDVOB_HOTPLUG_INT_EN (1 << 26) |
| #define SDVOC_HOTPLUG_INT_EN (1 << 25) |
| #define TV_HOTPLUG_INT_EN (1 << 18) |
| #define CRT_HOTPLUG_INT_EN (1 << 9) |
| #define CRT_HOTPLUG_FORCE_DETECT (1 << 3) |
| #define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8) |
| /* must use period 64 on GM45 according to docs */ |
| #define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) |
| #define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) |
| #define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) |
| #define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) |
| #define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) |
| #define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) |
| #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) |
| #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) |
| |
| /* Backlight control */ |
| #define BLC_PWM_CTL2 0x61250 /* 965+ only */ |
| #define BLM_PWM_ENABLE (1 << 31) |
| #define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ |
| #define BLM_PIPE_SELECT (1 << 29) |
| #define BLM_PIPE_SELECT_IVB (3 << 29) |
| #define BLM_PIPE_A (0 << 29) |
| #define BLM_PIPE_B (1 << 29) |
| #define BLM_PIPE_C (2 << 29) /* ivb + */ |
| #define BLM_PIPE(pipe) ((pipe) << 29) |
| #define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ |
| #define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) |
| #define BLM_PHASE_IN_ENABLE (1 << 25) |
| #define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) |
| #define BLM_PHASE_IN_TIME_BASE_SHIFT (16) |
| #define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) |
| #define BLM_PHASE_IN_COUNT_SHIFT (8) |
| #define BLM_PHASE_IN_COUNT_MASK (0xff << 8) |
| #define BLM_PHASE_IN_INCR_SHIFT (0) |
| #define BLM_PHASE_IN_INCR_MASK (0xff << 0) |
| #define BLC_PWM_CTL 0x61254 |
| /* |
| * This is the most significant 15 bits of the number of backlight cycles in a |
| * complete cycle of the modulated backlight control. |
| * |
| * The actual value is this field multiplied by two. |
| */ |
| #define BACKLIGHT_MODULATION_FREQ_SHIFT (17) |
| #define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) |
| #define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ |
| /* |
| * This is the number of cycles out of the backlight modulation cycle for which |
| * the backlight is on. |
| * |
| * This field must be no greater than the number of cycles in the complete |
| * backlight modulation cycle. |
| */ |
| #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) |
| #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) |
| #define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) |
| #define BLM_POLARITY_PNV (1 << 0) /* pnv only */ |
| |
| #define BLC_HIST_CTL 0x61260 |
| |
| /* |
| * New registers for PCH-split platforms. Safe where new bits show up, the |
| * register layout machtes with gen4 BLC_PWM_CTL[12] |
| */ |
| #define BLC_PWM_CPU_CTL2 0x48250 |
| #define BLC_PWM2_ENABLE (1<<31) |
| #define BLC_PWM_CPU_CTL 0x48254 |
| |
| #define BLM_HIST_CTL 0x48260 |
| #define ENH_HIST_ENABLE (1<<31) |
| #define ENH_MODIF_TBL_ENABLE (1<<30) |
| #define ENH_PIPE_A_SELECT (0<<29) |
| #define ENH_PIPE_B_SELECT (1<<29) |
| #define ENH_PIPE(pipe) _PIPE(pipe, ENH_PIPE_A_SELECT, ENH_PIPE_B_SELECT) |
| #define HIST_MODE_YUV (0<<24) |
| #define HIST_MODE_HSV (1<<24) |
| #define ENH_MODE_DIRECT (0<<13) |
| #define ENH_MODE_ADDITIVE (1<<13) |
| #define ENH_MODE_MULTIPLICATIVE (2<<13) |
| #define BIN_REGISTER_SET (1<<11) |
| #define ENH_NUM_BINS 32 |
| |
| #define BLM_HIST_ENH 0x48264 |
| |
| #define BLM_HIST_GUARD_BAND 0x48268 |
| #define BLM_HIST_INTR_ENABLE (1<<31) |
| #define BLM_HIST_EVENT_STATUS (1<<30) |
| #define BLM_HIST_INTR_DELAY_MASK (0xFF<<22) |
| #define BLM_HIST_INTR_DELAY_SHIFT 22 |
| |
| /* |
| * PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is |
| * like the normal CTL from gen4 and earlier. Hooray for confusing naming. |
| */ |
| #define BLC_PWM_PCH_CTL1 0xc8250 |
| #define BLM_PCH_PWM_ENABLE (1 << 31) |
| #define BLM_PCH_OVERRIDE_ENABLE (1 << 30) |
| #define BLM_PCH_POLARITY (1 << 29) |
| #define BLC_PWM_PCH_CTL2 0xc8254 |
| |
| /* digital port hotplug */ |
| #define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */ |
| #define PORTD_HOTPLUG_ENABLE (1 << 20) |
| #define PORTD_PULSE_DURATION_2ms (0) |
| #define PORTD_PULSE_DURATION_4_5ms (1 << 18) |
| #define PORTD_PULSE_DURATION_6ms (2 << 18) |
| #define PORTD_PULSE_DURATION_100ms (3 << 18) |
| #define PORTD_PULSE_DURATION_MASK (3 << 18) |
| #define PORTD_HOTPLUG_NO_DETECT (0) |
| #define PORTD_HOTPLUG_SHORT_DETECT (1 << 16) |
| #define PORTD_HOTPLUG_LONG_DETECT (1 << 17) |
| #define PORTC_HOTPLUG_ENABLE (1 << 12) |
| #define PORTC_PULSE_DURATION_2ms (0) |
| #define PORTC_PULSE_DURATION_4_5ms (1 << 10) |
| #define PORTC_PULSE_DURATION_6ms (2 << 10) |
| #define PORTC_PULSE_DURATION_100ms (3 << 10) |
| #define PORTC_PULSE_DURATION_MASK (3 << 10) |
| #define PORTC_HOTPLUG_NO_DETECT (0) |
| #define PORTC_HOTPLUG_SHORT_DETECT (1 << 8) |
| #define PORTC_HOTPLUG_LONG_DETECT (1 << 9) |
| #define PORTB_HOTPLUG_ENABLE (1 << 4) |
| #define PORTB_PULSE_DURATION_2ms (0) |
| #define PORTB_PULSE_DURATION_4_5ms (1 << 2) |
| #define PORTB_PULSE_DURATION_6ms (2 << 2) |
| #define PORTB_PULSE_DURATION_100ms (3 << 2) |
| #define PORTB_PULSE_DURATION_MASK (3 << 2) |
| #define PORTB_HOTPLUG_NO_DETECT (0) |
| #define PORTB_HOTPLUG_SHORT_DETECT (1 << 0) |
| #define PORTB_HOTPLUG_LONG_DETECT (1 << 1) |
| |
| #define PCH_GPIOA 0xc5010 |
| #define PCH_GPIOB 0xc5014 |
| #define PCH_GPIOC 0xc5018 |
| #define PCH_GPIOD 0xc501c |
| #define PCH_GPIOE 0xc5020 |
| #define PCH_GPIOF 0xc5024 |
| |
| #define PCH_GMBUS0 0xc5100 |
| #define PCH_GMBUS1 0xc5104 |
| #define PCH_GMBUS2 0xc5108 |
| #define PCH_GMBUS3 0xc510c |
| #define PCH_GMBUS4 0xc5110 |
| #define PCH_GMBUS5 0xc5120 |
| |
| #define _PCH_DPLL_A 0xc6014 |
| #define _PCH_DPLL_B 0xc6018 |
| #define _PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) |
| |
| #define _PCH_FPA0 0xc6040 |
| #define FP_CB_TUNE (0x3<<22) |
| #define _PCH_FPA1 0xc6044 |
| #define _PCH_FPB0 0xc6048 |
| #define _PCH_FPB1 0xc604c |
| #define _PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0) |
| #define _PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1) |
| |
| #define PCH_DPLL_TEST 0xc606c |
| |
| #define PCH_DREF_CONTROL 0xC6200 |
| #define DREF_CONTROL_MASK 0x7fc3 |
| #define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13) |
| #define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13) |
| #define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13) |
| #define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) |
| #define DREF_SSC_SOURCE_DISABLE (0<<11) |
| #define DREF_SSC_SOURCE_ENABLE (2<<11) |
| #define DREF_SSC_SOURCE_MASK (3<<11) |
| #define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) |
| #define DREF_NONSPREAD_CK505_ENABLE (1<<9) |
| #define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) |
| #define DREF_NONSPREAD_SOURCE_MASK (3<<9) |
| #define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) |
| #define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) |
| #define DREF_SUPERSPREAD_SOURCE_MASK (3<<7) |
| #define DREF_SSC4_DOWNSPREAD (0<<6) |
| #define DREF_SSC4_CENTERSPREAD (1<<6) |
| #define DREF_SSC1_DISABLE (0<<1) |
| #define DREF_SSC1_ENABLE (1<<1) |
| #define DREF_SSC4_DISABLE (0) |
| #define DREF_SSC4_ENABLE (1) |
| |
| #define PCH_RAWCLK_FREQ 0xc6204 |
| #define FDL_TP1_TIMER_SHIFT 12 |
| #define FDL_TP1_TIMER_MASK (3<<12) |
| #define FDL_TP2_TIMER_SHIFT 10 |
| #define FDL_TP2_TIMER_MASK (3<<10) |
| #define RAWCLK_FREQ_MASK 0x3ff |
| |
| #define PCH_DPLL_TMR_CFG 0xc6208 |
| |
| #define PCH_SSC4_PARMS 0xc6210 |
| #define PCH_SSC4_AUX_PARMS 0xc6214 |
| |
| #define PCH_DPLL_SEL 0xc7000 |
| #define TRANSA_DPLL_ENABLE (1<<3) |
| #define TRANSA_DPLLB_SEL (1<<0) |
| #define TRANSA_DPLLA_SEL 0 |
| #define TRANSB_DPLL_ENABLE (1<<7) |
| #define TRANSB_DPLLB_SEL (1<<4) |
| #define TRANSB_DPLLA_SEL (0) |
| #define TRANSC_DPLL_ENABLE (1<<11) |
| #define TRANSC_DPLLB_SEL (1<<8) |
| #define TRANSC_DPLLA_SEL (0) |
| |
| /* transcoder */ |
| |
| #define _TRANS_HTOTAL_A 0xe0000 |
| #define TRANS_HTOTAL_SHIFT 16 |
| #define TRANS_HACTIVE_SHIFT 0 |
| #define _TRANS_HBLANK_A 0xe0004 |
| #define TRANS_HBLANK_END_SHIFT 16 |
| #define TRANS_HBLANK_START_SHIFT 0 |
| #define _TRANS_HSYNC_A 0xe0008 |
| #define TRANS_HSYNC_END_SHIFT 16 |
| #define TRANS_HSYNC_START_SHIFT 0 |
| #define _TRANS_VTOTAL_A 0xe000c |
| #define TRANS_VTOTAL_SHIFT 16 |
| #define TRANS_VACTIVE_SHIFT 0 |
| #define _TRANS_VBLANK_A 0xe0010 |
| #define TRANS_VBLANK_END_SHIFT 16 |
| #define TRANS_VBLANK_START_SHIFT 0 |
| #define _TRANS_VSYNC_A 0xe0014 |
| #define TRANS_VSYNC_END_SHIFT 16 |
| #define TRANS_VSYNC_START_SHIFT 0 |
| #define _TRANS_VSYNCSHIFT_A 0xe0028 |
| |
| #define _TRANSA_DATA_M1 0xe0030 |
| #define _TRANSA_DATA_N1 0xe0034 |
| #define _TRANSA_DATA_M2 0xe0038 |
| #define _TRANSA_DATA_N2 0xe003c |
| #define _TRANSA_DP_LINK_M1 0xe0040 |
| #define _TRANSA_DP_LINK_N1 0xe0044 |
| #define _TRANSA_DP_LINK_M2 0xe0048 |
| #define _TRANSA_DP_LINK_N2 0xe004c |
| |
| /* Per-transcoder DIP controls */ |
| |
| #define _VIDEO_DIP_CTL_A 0xe0200 |
| #define _VIDEO_DIP_DATA_A 0xe0208 |
| #define _VIDEO_DIP_GCP_A 0xe0210 |
| |
| #define _VIDEO_DIP_CTL_B 0xe1200 |
| #define _VIDEO_DIP_DATA_B 0xe1208 |
| #define _VIDEO_DIP_GCP_B 0xe1210 |
| |
| #define TVIDEO_DIP_CTL(pipe) _PIPE(pipe, _VIDEO_DIP_CTL_A, _VIDEO_DIP_CTL_B) |
| #define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B) |
| #define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B) |
| |
| #define VLV_VIDEO_DIP_CTL_A 0x60200 |
| #define VLV_VIDEO_DIP_DATA_A 0x60208 |
| #define VLV_VIDEO_DIP_GDCP_PAYLOAD_A 0x60210 |
| |
| #define VLV_VIDEO_DIP_CTL_B 0x61170 |
| #define VLV_VIDEO_DIP_DATA_B 0x61174 |
| #define VLV_VIDEO_DIP_GDCP_PAYLOAD_B 0x61178 |
| |
| #define VLV_TVIDEO_DIP_CTL(pipe) \ |
| _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B) |
| #define VLV_TVIDEO_DIP_DATA(pipe) \ |
| _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B) |
| #define VLV_TVIDEO_DIP_GCP(pipe) \ |
| _PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B) |
| |
| /* vlv has 2 sets of panel control regs. */ |
| #define PIPEA_PP_STATUS 0x61200 |
| #define PIPEA_PP_CONTROL 0x61204 |
| #define PIPEA_PP_ON_DELAYS 0x61208 |
| #define PIPEA_PP_OFF_DELAYS 0x6120c |
| #define PIPEA_PP_DIVISOR 0x61210 |
| |
| #define PIPEB_PP_STATUS 0x61300 |
| #define PIPEB_PP_CONTROL 0x61304 |
| #define PIPEB_PP_ON_DELAYS 0x61308 |
| #define PIPEB_PP_OFF_DELAYS 0x6130c |
| #define PIPEB_PP_DIVISOR 0x61310 |
| |
| #define PCH_PP_STATUS 0xc7200 |
| #define PCH_PP_CONTROL 0xc7204 |
| #define PANEL_UNLOCK_REGS (0xabcd << 16) |
| #define PANEL_UNLOCK_MASK (0xffff << 16) |
| #define EDP_FORCE_VDD (1 << 3) |
| #define EDP_BLC_ENABLE (1 << 2) |
| #define PANEL_POWER_RESET (1 << 1) |
| #define PANEL_POWER_OFF (0 << 0) |
| #define PANEL_POWER_ON (1 << 0) |
| #define PCH_PP_ON_DELAYS 0xc7208 |
| #define PANEL_PORT_SELECT_MASK (3 << 30) |
| #define PANEL_PORT_SELECT_LVDS (0 << 30) |
| #define PANEL_PORT_SELECT_DPA (1 << 30) |
| #define EDP_PANEL (1 << 30) |
| #define PANEL_PORT_SELECT_DPC (2 << 30) |
| #define PANEL_PORT_SELECT_DPD (3 << 30) |
| #define PANEL_POWER_UP_DELAY_MASK (0x1fff0000) |
| #define PANEL_POWER_UP_DELAY_SHIFT 16 |
| #define PANEL_LIGHT_ON_DELAY_MASK (0x1fff) |
| #define PANEL_LIGHT_ON_DELAY_SHIFT 0 |
| |
| #define PCH_PP_OFF_DELAYS 0xc720c |
| #define PANEL_POWER_PORT_SELECT_MASK (0x3 << 30) |
| #define PANEL_POWER_PORT_LVDS (0 << 30) |
| #define PANEL_POWER_PORT_DP_A (1 << 30) |
| #define PANEL_POWER_PORT_DP_C (2 << 30) |
| #define PANEL_POWER_PORT_DP_D (3 << 30) |
| #define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000) |
| #define PANEL_POWER_DOWN_DELAY_SHIFT 16 |
| #define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff) |
| #define PANEL_LIGHT_OFF_DELAY_SHIFT 0 |
| |
| #define PCH_PP_DIVISOR 0xc7210 |
| #define PP_REFERENCE_DIVIDER_MASK (0xffffff00) |
| #define PP_REFERENCE_DIVIDER_SHIFT 8 |
| #define PANEL_POWER_CYCLE_DELAY_MASK (0x1f) |
| #define PANEL_POWER_CYCLE_DELAY_SHIFT 0 |
| |
| #define PCH_DP_B 0xe4100 |
| #define PCH_DPB_AUX_CH_CTL 0xe4110 |
| #define PCH_DPB_AUX_CH_DATA1 0xe4114 |
| #define PCH_DPB_AUX_CH_DATA2 0xe4118 |
| #define PCH_DPB_AUX_CH_DATA3 0xe411c |
| #define PCH_DPB_AUX_CH_DATA4 0xe4120 |
| #define PCH_DPB_AUX_CH_DATA5 0xe4124 |
| |
| #define PCH_DP_C 0xe4200 |
| #define PCH_DPC_AUX_CH_CTL 0xe4210 |
| #define PCH_DPC_AUX_CH_DATA1 0xe4214 |
| #define PCH_DPC_AUX_CH_DATA2 0xe4218 |
| #define PCH_DPC_AUX_CH_DATA3 0xe421c |
| #define PCH_DPC_AUX_CH_DATA4 0xe4220 |
| #define PCH_DPC_AUX_CH_DATA5 0xe4224 |
| |
| #define PCH_DP_D 0xe4300 |
| #define PCH_DPD_AUX_CH_CTL 0xe4310 |
| #define PCH_DPD_AUX_CH_DATA1 0xe4314 |
| #define PCH_DPD_AUX_CH_DATA2 0xe4318 |
| #define PCH_DPD_AUX_CH_DATA3 0xe431c |
| #define PCH_DPD_AUX_CH_DATA4 0xe4320 |
| #define PCH_DPD_AUX_CH_DATA5 0xe4324 |
| |
| #endif /* _I915_REG_H_ */ |