blob: 9acac29133cb900259eab828c7aa90a771060dbe [file] [log] [blame]
/*
* Pinctrl driver for Microchip PIC32 SoCs
* Copyright (c) 2015 Microchip Technology Inc.
* Written by Purna Chandra Mandal <purna.mandal@microchip.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <asm/io.h>
#include <dm/pinctrl.h>
#include <mach/pic32.h>
DECLARE_GLOBAL_DATA_PTR;
/* PIC32 has 10 peripheral ports with 16 pins each.
* Ports are marked PORTA-PORTK or PORT0-PORT9.
*/
enum {
PIC32_PORT_A = 0,
PIC32_PORT_B = 1,
PIC32_PORT_C = 2,
PIC32_PORT_D = 3,
PIC32_PORT_E = 4,
PIC32_PORT_F = 5,
PIC32_PORT_G = 6,
PIC32_PORT_H = 7,
PIC32_PORT_J = 8, /* no PORT_I */
PIC32_PORT_K = 9,
PIC32_PINS_PER_PORT = 16,
};
#define PIN_CONFIG_PIC32_DIGITAL (PIN_CONFIG_END + 1)
#define PIN_CONFIG_PIC32_ANALOG (PIN_CONFIG_END + 2)
/* pin configuration descriptor */
struct pic32_pin_config {
u16 port; /* port number */
u16 pin; /* pin number in the port */
u32 config; /* one of PIN_CONFIG_* */
};
#define PIN_CONFIG(_prt, _pin, _cfg) \
{.port = (_prt), .pin = (_pin), .config = (_cfg), }
/* In PIC32 muxing is performed at pin-level through two
* different set of registers - one set for input functions,
* and other for output functions.
* Pin configuration is handled through port register.
*/
/* Port control registers */
struct pic32_reg_port {
struct pic32_reg_atomic ansel;
struct pic32_reg_atomic tris;
struct pic32_reg_atomic port;
struct pic32_reg_atomic lat;
struct pic32_reg_atomic odc;
struct pic32_reg_atomic cnpu;
struct pic32_reg_atomic cnpd;
struct pic32_reg_atomic cncon;
struct pic32_reg_atomic unused[8];
};
/* Input function mux registers */
struct pic32_reg_in_mux {
u32 unused0;
u32 int1[4];
u32 unused1;
u32 t2ck[8];
u32 ic1[9];
u32 unused2;
u32 ocfar;
u32 unused3;
u32 u1rx;
u32 u1cts;
u32 u2rx;
u32 u2cts;
u32 u3rx;
u32 u3cts;
u32 u4rx;
u32 u4cts;
u32 u5rx;
u32 u5cts;
u32 u6rx;
u32 u6cts;
u32 unused4;
u32 sdi1;
u32 ss1;
u32 unused5;
u32 sdi2;
u32 ss2;
u32 unused6;
u32 sdi3;
u32 ss3;
u32 unused7;
u32 sdi4;
u32 ss4;
u32 unused8;
u32 sdi5;
u32 ss5;
u32 unused9;
u32 sdi6;
u32 ss6;
u32 c1rx;
u32 c2rx;
u32 refclki1;
u32 refclki2;
u32 refclki3;
u32 refclki4;
};
/* output mux register offset */
#define PPS_OUT(__port, __pin) \
(((__port) * PIC32_PINS_PER_PORT + (__pin)) << 2)
struct pic32_pinctrl_priv {
struct pic32_reg_in_mux *mux_in; /* mux input function */
struct pic32_reg_port *pinconf; /* pin configuration*/
void __iomem *mux_out; /* mux output function */
};
enum {
PERIPH_ID_UART1,
PERIPH_ID_UART2,
PERIPH_ID_ETH,
PERIPH_ID_USB,
PERIPH_ID_SDHCI,
PERIPH_ID_I2C1,
PERIPH_ID_I2C2,
PERIPH_ID_SPI1,
PERIPH_ID_SPI2,
PERIPH_ID_SQI,
};
static int pic32_pinconfig_one(struct pic32_pinctrl_priv *priv,
u32 port_nr, u32 pin, u32 param)
{
struct pic32_reg_port *port;
port = &priv->pinconf[port_nr];
switch (param) {
case PIN_CONFIG_PIC32_DIGITAL:
writel(BIT(pin), &port->ansel.clr);
break;
case PIN_CONFIG_PIC32_ANALOG:
writel(BIT(pin), &port->ansel.set);
break;
case PIN_CONFIG_INPUT_ENABLE:
writel(BIT(pin), &port->tris.set);
break;
case PIN_CONFIG_OUTPUT:
writel(BIT(pin), &port->tris.clr);
break;
case PIN_CONFIG_BIAS_PULL_UP:
writel(BIT(pin), &port->cnpu.set);
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
writel(BIT(pin), &port->cnpd.set);
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
writel(BIT(pin), &port->odc.set);
break;
default:
break;
}
return 0;
}
static int pic32_pinconfig_set(struct pic32_pinctrl_priv *priv,
const struct pic32_pin_config *list, int count)
{
int i;
for (i = 0 ; i < count; i++)
pic32_pinconfig_one(priv, list[i].port,
list[i].pin, list[i].config);
return 0;
}
static void pic32_eth_pin_config(struct udevice *dev)
{
struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
const struct pic32_pin_config configs[] = {
/* EMDC - D11 */
PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_OUTPUT),
/* ETXEN */
PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_OUTPUT),
/* ECRSDV */
PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_INPUT_ENABLE),
/* ERXD0 */
PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_INPUT_ENABLE),
PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_BIAS_PULL_DOWN),
/* ERXD1 */
PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_INPUT_ENABLE),
PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_BIAS_PULL_DOWN),
/* EREFCLK */
PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_INPUT_ENABLE),
/* ETXD1 */
PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_OUTPUT),
/* ETXD0 */
PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_OUTPUT),
/* EMDIO */
PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_INPUT_ENABLE),
/* ERXERR */
PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_PIC32_DIGITAL),
PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_INPUT_ENABLE),
};
pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
}
static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
{
struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
switch (func) {
case PERIPH_ID_UART2:
/* PPS for U2 RX/TX */
writel(0x02, priv->mux_out + PPS_OUT(PIC32_PORT_G, 9));
writel(0x05, &priv->mux_in->u2rx); /* B0 */
/* set digital mode */
pic32_pinconfig_one(priv, PIC32_PORT_G, 9,
PIN_CONFIG_PIC32_DIGITAL);
pic32_pinconfig_one(priv, PIC32_PORT_B, 0,
PIN_CONFIG_PIC32_DIGITAL);
break;
case PERIPH_ID_ETH:
pic32_eth_pin_config(dev);
break;
default:
debug("%s: unknown-unhandled case\n", __func__);
break;
}
return 0;
}
static int pic32_pinctrl_get_periph_id(struct udevice *dev,
struct udevice *periph)
{
int ret;
u32 cell[2];
ret = fdtdec_get_int_array(gd->fdt_blob, periph->of_offset,
"interrupts", cell, ARRAY_SIZE(cell));
if (ret < 0)
return -EINVAL;
/* interrupt number */
switch (cell[0]) {
case 112 ... 114:
return PERIPH_ID_UART1;
case 145 ... 147:
return PERIPH_ID_UART2;
case 109 ... 111:
return PERIPH_ID_SPI1;
case 142 ... 144:
return PERIPH_ID_SPI2;
case 115 ... 117:
return PERIPH_ID_I2C1;
case 148 ... 150:
return PERIPH_ID_I2C2;
case 132 ... 133:
return PERIPH_ID_USB;
case 169:
return PERIPH_ID_SQI;
case 191:
return PERIPH_ID_SDHCI;
case 153:
return PERIPH_ID_ETH;
default:
break;
}
return -ENOENT;
}
static int pic32_pinctrl_set_state_simple(struct udevice *dev,
struct udevice *periph)
{
int func;
debug("%s: periph %s\n", __func__, periph->name);
func = pic32_pinctrl_get_periph_id(dev, periph);
if (func < 0)
return func;
return pic32_pinctrl_request(dev, func, 0);
}
static struct pinctrl_ops pic32_pinctrl_ops = {
.set_state_simple = pic32_pinctrl_set_state_simple,
.request = pic32_pinctrl_request,
.get_periph_id = pic32_pinctrl_get_periph_id,
};
static int pic32_pinctrl_probe(struct udevice *dev)
{
struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
struct fdt_resource res;
void *fdt = (void *)gd->fdt_blob;
int node = dev->of_offset;
int ret;
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"ppsin", &res);
if (ret < 0) {
printf("pinctrl: resource \"ppsin\" not found\n");
return ret;
}
priv->mux_in = ioremap(res.start, fdt_resource_size(&res));
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"ppsout", &res);
if (ret < 0) {
printf("pinctrl: resource \"ppsout\" not found\n");
return ret;
}
priv->mux_out = ioremap(res.start, fdt_resource_size(&res));
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"port", &res);
if (ret < 0) {
printf("pinctrl: resource \"port\" not found\n");
return ret;
}
priv->pinconf = ioremap(res.start, fdt_resource_size(&res));
return 0;
}
static const struct udevice_id pic32_pinctrl_ids[] = {
{ .compatible = "microchip,pic32mzda-pinctrl" },
{ }
};
U_BOOT_DRIVER(pinctrl_pic32) = {
.name = "pinctrl_pic32",
.id = UCLASS_PINCTRL,
.of_match = pic32_pinctrl_ids,
.ops = &pic32_pinctrl_ops,
.probe = pic32_pinctrl_probe,
.bind = dm_scan_fdt_dev,
.priv_auto_alloc_size = sizeof(struct pic32_pinctrl_priv),
};