| /* |
| * Vitesse 7385 Switch Firmware Upload |
| * |
| * Author: Timur Tabi <timur@freescale.com> |
| * |
| * Copyright 2008 Freescale Semiconductor, Inc. This file is licensed |
| * under the terms of the GNU General Public License version 2. This |
| * program is licensed "as is" without any warranty of any kind, whether |
| * express or implied. |
| * |
| * This module uploads proprietary firmware for the Vitesse VSC7385 5-port |
| * switch. |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <console.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include "vsc7385.h" |
| |
| /* |
| * Upload a Vitesse VSC7385 firmware image to the hardware |
| * |
| * This function takes a pointer to a VSC7385 firmware image and a size, and |
| * uploads that firmware to the VSC7385. |
| * |
| * This firmware is typically located at a board-specific flash address, |
| * and the size is typically 8KB. |
| * |
| * The firmware is Vitesse proprietary. |
| * |
| * Further details on the register information can be obtained from Vitesse. |
| */ |
| int vsc7385_upload_firmware(void *firmware, unsigned int size) |
| { |
| u8 *fw = firmware; |
| unsigned int i; |
| |
| u32 *gloreset = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c050); |
| u32 *icpu_ctrl = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c040); |
| u32 *icpu_addr = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c044); |
| u32 *icpu_data = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c048); |
| u32 *icpu_rom_map = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c070); |
| #ifdef DEBUG |
| u32 *chipid = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c060); |
| #endif |
| |
| out_be32(gloreset, 3); |
| udelay(200); |
| |
| out_be32(icpu_ctrl, 0x8E); |
| udelay(20); |
| |
| out_be32(icpu_rom_map, 1); |
| udelay(20); |
| |
| /* Write the firmware to I-RAM */ |
| out_be32(icpu_addr, 0); |
| udelay(20); |
| |
| for (i = 0; i < size; i++) { |
| out_be32(icpu_data, fw[i]); |
| udelay(20); |
| if (ctrlc()) |
| return -EINTR; |
| } |
| |
| /* Read back and compare */ |
| out_be32(icpu_addr, 0); |
| udelay(20); |
| |
| for (i = 0; i < size; i++) { |
| u8 value; |
| |
| value = (u8) in_be32(icpu_data); |
| udelay(20); |
| if (value != fw[i]) { |
| debug("VSC7385: Upload mismatch: address 0x%x, " |
| "read value 0x%x, image value 0x%x\n", |
| i, value, fw[i]); |
| |
| return -EIO; |
| } |
| if (ctrlc()) |
| break; |
| } |
| |
| out_be32(icpu_ctrl, 0x0B); |
| udelay(20); |
| |
| #ifdef DEBUG |
| printf("VSC7385: Chip ID is %08x\n", in_be32(chipid)); |
| udelay(20); |
| #endif |
| |
| return 0; |
| } |