| /* |
| * Faraday FTMAC100 Ethernet |
| * |
| * (C) Copyright 2009 Faraday Technology |
| * Po-Yu Chuang <ratbert@faraday-tech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <asm/io.h> |
| |
| #include "ftmac100.h" |
| |
| #define ETH_ZLEN 60 |
| |
| struct ftmac100_data { |
| struct ftmac100_txdes txdes[1]; |
| struct ftmac100_rxdes rxdes[PKTBUFSRX]; |
| int rx_index; |
| }; |
| |
| /* |
| * Reset MAC |
| */ |
| static void ftmac100_reset (struct eth_device *dev) |
| { |
| struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase; |
| |
| debug ("%s()\n", __func__); |
| |
| writel (FTMAC100_MACCR_SW_RST, &ftmac100->maccr); |
| |
| while (readl (&ftmac100->maccr) & FTMAC100_MACCR_SW_RST) |
| ; |
| } |
| |
| /* |
| * Set MAC address |
| */ |
| static void ftmac100_set_mac (struct eth_device *dev, const unsigned char *mac) |
| { |
| struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase; |
| unsigned int maddr = mac[0] << 8 | mac[1]; |
| unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5]; |
| |
| debug ("%s(%x %x)\n", __func__, maddr, laddr); |
| |
| writel (maddr, &ftmac100->mac_madr); |
| writel (laddr, &ftmac100->mac_ladr); |
| } |
| |
| static void ftmac100_set_mac_from_env (struct eth_device *dev) |
| { |
| eth_getenv_enetaddr ("ethaddr", dev->enetaddr); |
| |
| ftmac100_set_mac (dev, dev->enetaddr); |
| } |
| |
| /* |
| * disable transmitter, receiver |
| */ |
| static void ftmac100_halt (struct eth_device *dev) |
| { |
| struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase; |
| |
| debug ("%s()\n", __func__); |
| |
| writel (0, &ftmac100->maccr); |
| } |
| |
| static int ftmac100_init (struct eth_device *dev, bd_t *bd) |
| { |
| struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase; |
| struct ftmac100_data *priv = dev->priv; |
| struct ftmac100_txdes *txdes = priv->txdes; |
| struct ftmac100_rxdes *rxdes = priv->rxdes; |
| unsigned int maccr; |
| int i; |
| |
| debug ("%s()\n", __func__); |
| |
| ftmac100_reset (dev); |
| |
| /* set the ethernet address */ |
| |
| ftmac100_set_mac_from_env (dev); |
| |
| /* disable all interrupts */ |
| |
| writel (0, &ftmac100->imr); |
| |
| /* initialize descriptors */ |
| |
| priv->rx_index = 0; |
| |
| txdes[0].txdes1 = FTMAC100_TXDES1_EDOTR; |
| rxdes[PKTBUFSRX - 1].rxdes1 = FTMAC100_RXDES1_EDORR; |
| |
| for (i = 0; i < PKTBUFSRX; i++) { |
| /* RXBUF_BADR */ |
| rxdes[i].rxdes2 = (unsigned int)net_rx_packets[i]; |
| rxdes[i].rxdes1 |= FTMAC100_RXDES1_RXBUF_SIZE (PKTSIZE_ALIGN); |
| rxdes[i].rxdes0 = FTMAC100_RXDES0_RXDMA_OWN; |
| } |
| |
| /* transmit ring */ |
| |
| writel ((unsigned int)txdes, &ftmac100->txr_badr); |
| |
| /* receive ring */ |
| |
| writel ((unsigned int)rxdes, &ftmac100->rxr_badr); |
| |
| /* poll receive descriptor automatically */ |
| |
| writel (FTMAC100_APTC_RXPOLL_CNT (1), &ftmac100->aptc); |
| |
| /* enable transmitter, receiver */ |
| |
| maccr = FTMAC100_MACCR_XMT_EN | |
| FTMAC100_MACCR_RCV_EN | |
| FTMAC100_MACCR_XDMA_EN | |
| FTMAC100_MACCR_RDMA_EN | |
| FTMAC100_MACCR_CRC_APD | |
| FTMAC100_MACCR_ENRX_IN_HALFTX | |
| FTMAC100_MACCR_RX_RUNT | |
| FTMAC100_MACCR_RX_BROADPKT; |
| |
| writel (maccr, &ftmac100->maccr); |
| |
| return 0; |
| } |
| |
| /* |
| * Get a data block via Ethernet |
| */ |
| static int ftmac100_recv (struct eth_device *dev) |
| { |
| struct ftmac100_data *priv = dev->priv; |
| struct ftmac100_rxdes *curr_des; |
| unsigned short rxlen; |
| |
| curr_des = &priv->rxdes[priv->rx_index]; |
| |
| if (curr_des->rxdes0 & FTMAC100_RXDES0_RXDMA_OWN) |
| return -1; |
| |
| if (curr_des->rxdes0 & (FTMAC100_RXDES0_RX_ERR | |
| FTMAC100_RXDES0_CRC_ERR | |
| FTMAC100_RXDES0_FTL | |
| FTMAC100_RXDES0_RUNT | |
| FTMAC100_RXDES0_RX_ODD_NB)) { |
| return -1; |
| } |
| |
| rxlen = FTMAC100_RXDES0_RFL (curr_des->rxdes0); |
| |
| debug ("%s(): RX buffer %d, %x received\n", |
| __func__, priv->rx_index, rxlen); |
| |
| /* pass the packet up to the protocol layers. */ |
| |
| net_process_received_packet((void *)curr_des->rxdes2, rxlen); |
| |
| /* release buffer to DMA */ |
| |
| curr_des->rxdes0 |= FTMAC100_RXDES0_RXDMA_OWN; |
| |
| priv->rx_index = (priv->rx_index + 1) % PKTBUFSRX; |
| |
| return 0; |
| } |
| |
| /* |
| * Send a data block via Ethernet |
| */ |
| static int ftmac100_send(struct eth_device *dev, void *packet, int length) |
| { |
| struct ftmac100 *ftmac100 = (struct ftmac100 *)dev->iobase; |
| struct ftmac100_data *priv = dev->priv; |
| struct ftmac100_txdes *curr_des = priv->txdes; |
| ulong start; |
| |
| if (curr_des->txdes0 & FTMAC100_TXDES0_TXDMA_OWN) { |
| debug ("%s(): no TX descriptor available\n", __func__); |
| return -1; |
| } |
| |
| debug ("%s(%x, %x)\n", __func__, (int)packet, length); |
| |
| length = (length < ETH_ZLEN) ? ETH_ZLEN : length; |
| |
| /* initiate a transmit sequence */ |
| |
| curr_des->txdes2 = (unsigned int)packet; /* TXBUF_BADR */ |
| |
| curr_des->txdes1 &= FTMAC100_TXDES1_EDOTR; |
| curr_des->txdes1 |= FTMAC100_TXDES1_FTS | |
| FTMAC100_TXDES1_LTS | |
| FTMAC100_TXDES1_TXBUF_SIZE (length); |
| |
| curr_des->txdes0 = FTMAC100_TXDES0_TXDMA_OWN; |
| |
| /* start transmit */ |
| |
| writel (1, &ftmac100->txpd); |
| |
| /* wait for transfer to succeed */ |
| |
| start = get_timer(0); |
| while (curr_des->txdes0 & FTMAC100_TXDES0_TXDMA_OWN) { |
| if (get_timer(start) >= 5) { |
| debug ("%s(): timed out\n", __func__); |
| return -1; |
| } |
| } |
| |
| debug ("%s(): packet sent\n", __func__); |
| |
| return 0; |
| } |
| |
| int ftmac100_initialize (bd_t *bd) |
| { |
| struct eth_device *dev; |
| struct ftmac100_data *priv; |
| |
| dev = malloc (sizeof *dev); |
| if (!dev) { |
| printf ("%s(): failed to allocate dev\n", __func__); |
| goto out; |
| } |
| |
| /* Transmit and receive descriptors should align to 16 bytes */ |
| |
| priv = memalign (16, sizeof (struct ftmac100_data)); |
| if (!priv) { |
| printf ("%s(): failed to allocate priv\n", __func__); |
| goto free_dev; |
| } |
| |
| memset (dev, 0, sizeof (*dev)); |
| memset (priv, 0, sizeof (*priv)); |
| |
| strcpy(dev->name, "FTMAC100"); |
| dev->iobase = CONFIG_FTMAC100_BASE; |
| dev->init = ftmac100_init; |
| dev->halt = ftmac100_halt; |
| dev->send = ftmac100_send; |
| dev->recv = ftmac100_recv; |
| dev->priv = priv; |
| |
| eth_register (dev); |
| |
| return 1; |
| |
| free_dev: |
| free (dev); |
| out: |
| return 0; |
| } |