| /* |
| * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <qfw.h> |
| #include <asm/io.h> |
| #ifdef CONFIG_GENERATE_ACPI_TABLE |
| #include <asm/tables.h> |
| #endif |
| #include <linux/list.h> |
| |
| static bool fwcfg_present; |
| static bool fwcfg_dma_present; |
| static struct fw_cfg_arch_ops *fwcfg_arch_ops; |
| |
| static LIST_HEAD(fw_list); |
| |
| #ifdef CONFIG_GENERATE_ACPI_TABLE |
| /* |
| * This function allocates memory for ACPI tables |
| * |
| * @entry : BIOS linker command entry which tells where to allocate memory |
| * (either high memory or low memory) |
| * @addr : The address that should be used for low memory allcation. If the |
| * memory allocation request is 'ZONE_HIGH' then this parameter will |
| * be ignored. |
| * @return: 0 on success, or negative value on failure |
| */ |
| static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr) |
| { |
| uint32_t size, align; |
| struct fw_file *file; |
| unsigned long aligned_addr; |
| |
| align = le32_to_cpu(entry->alloc.align); |
| /* align must be power of 2 */ |
| if (align & (align - 1)) { |
| printf("error: wrong alignment %u\n", align); |
| return -EINVAL; |
| } |
| |
| file = qemu_fwcfg_find_file(entry->alloc.file); |
| if (!file) { |
| printf("error: can't find file %s\n", entry->alloc.file); |
| return -ENOENT; |
| } |
| |
| size = be32_to_cpu(file->cfg.size); |
| |
| /* |
| * ZONE_HIGH means we need to allocate from high memory, since |
| * malloc space is already at the end of RAM, so we directly use it. |
| * If allocation zone is ZONE_FSEG, then we use the 'addr' passed |
| * in which is low memory |
| */ |
| if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) { |
| aligned_addr = (unsigned long)memalign(align, size); |
| if (!aligned_addr) { |
| printf("error: allocating resource\n"); |
| return -ENOMEM; |
| } |
| } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) { |
| aligned_addr = ALIGN(*addr, align); |
| } else { |
| printf("error: invalid allocation zone\n"); |
| return -EINVAL; |
| } |
| |
| debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n", |
| file->cfg.name, size, entry->alloc.zone, align, aligned_addr); |
| |
| qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select), |
| size, (void *)aligned_addr); |
| file->addr = aligned_addr; |
| |
| /* adjust address for low memory allocation */ |
| if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) |
| *addr = (aligned_addr + size); |
| |
| return 0; |
| } |
| |
| /* |
| * This function patches ACPI tables previously loaded |
| * by bios_linker_allocate() |
| * |
| * @entry : BIOS linker command entry which tells how to patch |
| * ACPI tables |
| * @return: 0 on success, or negative value on failure |
| */ |
| static int bios_linker_add_pointer(struct bios_linker_entry *entry) |
| { |
| struct fw_file *dest, *src; |
| uint32_t offset = le32_to_cpu(entry->pointer.offset); |
| uint64_t pointer = 0; |
| |
| dest = qemu_fwcfg_find_file(entry->pointer.dest_file); |
| if (!dest || !dest->addr) |
| return -ENOENT; |
| src = qemu_fwcfg_find_file(entry->pointer.src_file); |
| if (!src || !src->addr) |
| return -ENOENT; |
| |
| debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n", |
| dest->addr, src->addr, offset, entry->pointer.size, pointer); |
| |
| memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size); |
| pointer = le64_to_cpu(pointer); |
| pointer += (unsigned long)src->addr; |
| pointer = cpu_to_le64(pointer); |
| memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size); |
| |
| return 0; |
| } |
| |
| /* |
| * This function updates checksum fields of ACPI tables previously loaded |
| * by bios_linker_allocate() |
| * |
| * @entry : BIOS linker command entry which tells where to update ACPI table |
| * checksums |
| * @return: 0 on success, or negative value on failure |
| */ |
| static int bios_linker_add_checksum(struct bios_linker_entry *entry) |
| { |
| struct fw_file *file; |
| uint8_t *data, cksum = 0; |
| uint8_t *cksum_start; |
| |
| file = qemu_fwcfg_find_file(entry->cksum.file); |
| if (!file || !file->addr) |
| return -ENOENT; |
| |
| data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset)); |
| cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start)); |
| cksum = table_compute_checksum(cksum_start, |
| le32_to_cpu(entry->cksum.length)); |
| *data = cksum; |
| |
| return 0; |
| } |
| |
| /* This function loads and patches ACPI tables provided by QEMU */ |
| u32 write_acpi_tables(u32 addr) |
| { |
| int i, ret = 0; |
| struct fw_file *file; |
| struct bios_linker_entry *table_loader; |
| struct bios_linker_entry *entry; |
| uint32_t size; |
| |
| /* make sure fw_list is loaded */ |
| ret = qemu_fwcfg_read_firmware_list(); |
| if (ret) { |
| printf("error: can't read firmware file list\n"); |
| return addr; |
| } |
| |
| file = qemu_fwcfg_find_file("etc/table-loader"); |
| if (!file) { |
| printf("error: can't find etc/table-loader\n"); |
| return addr; |
| } |
| |
| size = be32_to_cpu(file->cfg.size); |
| if ((size % sizeof(*entry)) != 0) { |
| printf("error: table-loader maybe corrupted\n"); |
| return addr; |
| } |
| |
| table_loader = malloc(size); |
| if (!table_loader) { |
| printf("error: no memory for table-loader\n"); |
| return addr; |
| } |
| |
| qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select), |
| size, table_loader); |
| |
| for (i = 0; i < (size / sizeof(*entry)); i++) { |
| entry = table_loader + i; |
| switch (le32_to_cpu(entry->command)) { |
| case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: |
| ret = bios_linker_allocate(entry, &addr); |
| if (ret) |
| goto out; |
| break; |
| case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: |
| ret = bios_linker_add_pointer(entry); |
| if (ret) |
| goto out; |
| break; |
| case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: |
| ret = bios_linker_add_checksum(entry); |
| if (ret) |
| goto out; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| out: |
| if (ret) { |
| struct fw_cfg_file_iter iter; |
| for (file = qemu_fwcfg_file_iter_init(&iter); |
| !qemu_fwcfg_file_iter_end(&iter); |
| file = qemu_fwcfg_file_iter_next(&iter)) { |
| if (file->addr) { |
| free((void *)file->addr); |
| file->addr = 0; |
| } |
| } |
| } |
| |
| free(table_loader); |
| return addr; |
| } |
| #endif |
| |
| /* Read configuration item using fw_cfg PIO interface */ |
| static void qemu_fwcfg_read_entry_pio(uint16_t entry, |
| uint32_t size, void *address) |
| { |
| debug("qemu_fwcfg_read_entry_pio: entry 0x%x, size %u address %p\n", |
| entry, size, address); |
| |
| return fwcfg_arch_ops->arch_read_pio(entry, size, address); |
| } |
| |
| /* Read configuration item using fw_cfg DMA interface */ |
| static void qemu_fwcfg_read_entry_dma(uint16_t entry, |
| uint32_t size, void *address) |
| { |
| struct fw_cfg_dma_access dma; |
| |
| dma.length = cpu_to_be32(size); |
| dma.address = cpu_to_be64((uintptr_t)address); |
| dma.control = cpu_to_be32(FW_CFG_DMA_READ); |
| |
| /* |
| * writting FW_CFG_INVALID will cause read operation to resume at |
| * last offset, otherwise read will start at offset 0 |
| */ |
| if (entry != FW_CFG_INVALID) |
| dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16)); |
| |
| barrier(); |
| |
| debug("qemu_fwcfg_read_entry_dma: entry 0x%x, size %u address %p, control 0x%x\n", |
| entry, size, address, be32_to_cpu(dma.control)); |
| |
| fwcfg_arch_ops->arch_read_dma(&dma); |
| } |
| |
| bool qemu_fwcfg_present(void) |
| { |
| return fwcfg_present; |
| } |
| |
| bool qemu_fwcfg_dma_present(void) |
| { |
| return fwcfg_dma_present; |
| } |
| |
| void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address) |
| { |
| if (fwcfg_dma_present) |
| qemu_fwcfg_read_entry_dma(entry, length, address); |
| else |
| qemu_fwcfg_read_entry_pio(entry, length, address); |
| } |
| |
| int qemu_fwcfg_online_cpus(void) |
| { |
| uint16_t nb_cpus; |
| |
| if (!fwcfg_present) |
| return -ENODEV; |
| |
| qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus); |
| |
| return le16_to_cpu(nb_cpus); |
| } |
| |
| int qemu_fwcfg_read_firmware_list(void) |
| { |
| int i; |
| uint32_t count; |
| struct fw_file *file; |
| struct list_head *entry; |
| |
| /* don't read it twice */ |
| if (!list_empty(&fw_list)) |
| return 0; |
| |
| qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count); |
| if (!count) |
| return 0; |
| |
| count = be32_to_cpu(count); |
| for (i = 0; i < count; i++) { |
| file = malloc(sizeof(*file)); |
| if (!file) { |
| printf("error: allocating resource\n"); |
| goto err; |
| } |
| qemu_fwcfg_read_entry(FW_CFG_INVALID, |
| sizeof(struct fw_cfg_file), &file->cfg); |
| file->addr = 0; |
| list_add_tail(&file->list, &fw_list); |
| } |
| |
| return 0; |
| |
| err: |
| list_for_each(entry, &fw_list) { |
| file = list_entry(entry, struct fw_file, list); |
| free(file); |
| } |
| |
| return -ENOMEM; |
| } |
| |
| struct fw_file *qemu_fwcfg_find_file(const char *name) |
| { |
| struct list_head *entry; |
| struct fw_file *file; |
| |
| list_for_each(entry, &fw_list) { |
| file = list_entry(entry, struct fw_file, list); |
| if (!strcmp(file->cfg.name, name)) |
| return file; |
| } |
| |
| return NULL; |
| } |
| |
| struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter) |
| { |
| iter->entry = fw_list.next; |
| return list_entry((struct list_head *)iter->entry, |
| struct fw_file, list); |
| } |
| |
| struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter) |
| { |
| iter->entry = ((struct list_head *)iter->entry)->next; |
| return list_entry((struct list_head *)iter->entry, |
| struct fw_file, list); |
| } |
| |
| bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter) |
| { |
| return iter->entry == &fw_list; |
| } |
| |
| void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops) |
| { |
| uint32_t qemu; |
| uint32_t dma_enabled; |
| |
| fwcfg_present = false; |
| fwcfg_dma_present = false; |
| fwcfg_arch_ops = NULL; |
| |
| if (!ops || !ops->arch_read_pio || !ops->arch_read_dma) |
| return; |
| fwcfg_arch_ops = ops; |
| |
| qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu); |
| if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE) |
| fwcfg_present = true; |
| |
| if (fwcfg_present) { |
| qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled); |
| if (dma_enabled & FW_CFG_DMA_ENABLED) |
| fwcfg_dma_present = true; |
| } |
| } |