| /* |
| * Sunxi A31 Power Management Unit |
| * |
| * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> |
| * http://linux-sunxi.org |
| * |
| * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work |
| * |
| * (C) Copyright 2006-2013 |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * Berg Xing <bergxing@allwinnertech.com> |
| * Tom Cubie <tangliang@allwinnertech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/p2wi.h> |
| #include <asm/arch/prcm.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| |
| void p2wi_init(void) |
| { |
| struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; |
| |
| /* Enable p2wi and PIO clk, and de-assert their resets */ |
| prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI); |
| |
| sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK); |
| sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA); |
| |
| /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */ |
| writel(P2WI_CTRL_RESET, &p2wi->ctrl); |
| sdelay(0x100); |
| writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8), |
| &p2wi->cc); |
| } |
| |
| int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data) |
| { |
| struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; |
| unsigned long tmo = timer_get_us() + 1000000; |
| |
| writel(P2WI_PM_DEV_ADDR(slave_addr) | |
| P2WI_PM_CTRL_ADDR(ctrl_reg) | |
| P2WI_PM_INIT_DATA(init_data) | |
| P2WI_PM_INIT_SEND, |
| &p2wi->pm); |
| |
| while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) { |
| if (timer_get_us() > tmo) |
| return -ETIME; |
| } |
| |
| return 0; |
| } |
| |
| static int p2wi_await_trans(void) |
| { |
| struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; |
| unsigned long tmo = timer_get_us() + 1000000; |
| int ret; |
| u8 reg; |
| |
| while (1) { |
| reg = readl(&p2wi->status); |
| if (reg & P2WI_STAT_TRANS_ERR) { |
| ret = -EIO; |
| break; |
| } |
| if (reg & P2WI_STAT_TRANS_DONE) { |
| ret = 0; |
| break; |
| } |
| if (timer_get_us() > tmo) { |
| ret = -ETIME; |
| break; |
| } |
| } |
| writel(reg, &p2wi->status); /* Clear status bits */ |
| return ret; |
| } |
| |
| int p2wi_read(const u8 addr, u8 *data) |
| { |
| struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; |
| int ret; |
| |
| writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); |
| writel(P2WI_DATA_NUM_BYTES(1) | |
| P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes); |
| writel(P2WI_STAT_TRANS_DONE, &p2wi->status); |
| writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); |
| |
| ret = p2wi_await_trans(); |
| |
| *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK; |
| return ret; |
| } |
| |
| int p2wi_write(const u8 addr, u8 data) |
| { |
| struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE; |
| |
| writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0); |
| writel(P2WI_DATA_BYTE_1(data), &p2wi->data0); |
| writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes); |
| writel(P2WI_STAT_TRANS_DONE, &p2wi->status); |
| writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl); |
| |
| return p2wi_await_trans(); |
| } |