| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Internal environment header file. This includes direct access to environment |
| * information such as its size and offset, direct access to the default |
| * environment and embedded environment (if used). It also provides environment |
| * drivers with various declarations. |
| * |
| * It should not be included by board files, drivers and code other than that |
| * related to the environment implementation. |
| * |
| * (C) Copyright 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| #ifndef _ENV_INTERNAL_H_ |
| #define _ENV_INTERNAL_H_ |
| |
| #include <linux/kconfig.h> |
| |
| /************************************************************************** |
| * |
| * The "environment" is stored as a list of '\0' terminated |
| * "name=value" strings. The end of the list is marked by a double |
| * '\0'. New entries are always added at the end. Deleting an entry |
| * shifts the remaining entries to the front. Replacing an entry is a |
| * combination of deleting the old value and adding the new one. |
| * |
| * The environment is preceded by a 32 bit CRC over the data part. |
| * |
| *************************************************************************/ |
| |
| #if defined(CONFIG_ENV_IS_IN_FLASH) |
| # if defined(CONFIG_ENV_ADDR_REDUND) && \ |
| ((CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \ |
| (CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE) <= \ |
| (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) |
| # define ENV_IS_EMBEDDED |
| # endif |
| # if (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \ |
| (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) <= \ |
| (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) |
| # define ENV_IS_EMBEDDED |
| # endif |
| # ifdef CONFIG_ENV_IS_EMBEDDED |
| # error "do not define CONFIG_ENV_IS_EMBEDDED in your board config" |
| # error "it is calculated automatically for you" |
| # endif |
| #endif /* CONFIG_ENV_IS_IN_FLASH */ |
| |
| #if defined(CONFIG_ENV_IS_IN_NAND) |
| # if defined(CONFIG_ENV_OFFSET_OOB) |
| # ifdef CONFIG_ENV_OFFSET_REDUND |
| # error "CONFIG_ENV_OFFSET_REDUND is not supported when CONFIG_ENV_OFFSET_OOB" |
| # error "is set" |
| # endif |
| extern unsigned long nand_env_oob_offset; |
| # define CONFIG_ENV_OFFSET nand_env_oob_offset |
| # endif /* CONFIG_ENV_OFFSET_OOB */ |
| #endif /* CONFIG_ENV_IS_IN_NAND */ |
| |
| /* |
| * For the flash types where embedded env is supported, but it cannot be |
| * calculated automatically (i.e. NAND), take the board opt-in. |
| */ |
| #if defined(CONFIG_ENV_IS_EMBEDDED) && !defined(ENV_IS_EMBEDDED) |
| # define ENV_IS_EMBEDDED |
| #endif |
| |
| /* The build system likes to know if the env is embedded */ |
| #ifdef DO_DEPS_ONLY |
| # ifdef ENV_IS_EMBEDDED |
| # ifndef CONFIG_ENV_IS_EMBEDDED |
| # define CONFIG_ENV_IS_EMBEDDED |
| # endif |
| # endif |
| #endif |
| |
| #include "compiler.h" |
| |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| # define ENV_HEADER_SIZE (sizeof(uint32_t) + 1) |
| #else |
| # define ENV_HEADER_SIZE (sizeof(uint32_t)) |
| #endif |
| |
| #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) |
| |
| /* |
| * If the environment is in RAM, allocate extra space for it in the malloc |
| * region. |
| */ |
| #if defined(CONFIG_ENV_IS_EMBEDDED) |
| #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN |
| #elif (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE < CONFIG_SYS_MONITOR_BASE) || \ |
| (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) || \ |
| defined(CONFIG_ENV_IS_IN_NVRAM) |
| #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) |
| #else |
| #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN |
| #endif |
| |
| typedef struct environment_s { |
| uint32_t crc; /* CRC32 over data bytes */ |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| unsigned char flags; /* active/obsolete flags ENVF_REDUND_ */ |
| #endif |
| unsigned char data[ENV_SIZE]; /* Environment data */ |
| } env_t; |
| |
| #ifdef ENV_IS_EMBEDDED |
| extern env_t embedded_environment; |
| #endif /* ENV_IS_EMBEDDED */ |
| |
| extern const unsigned char default_environment[]; |
| |
| #ifndef DO_DEPS_ONLY |
| |
| #include <env_attr.h> |
| #include <env_callback.h> |
| #include <env_flags.h> |
| #include <search.h> |
| |
| enum env_location { |
| ENVL_UNKNOWN, |
| ENVL_EEPROM, |
| ENVL_EXT4, |
| ENVL_FAT, |
| ENVL_FLASH, |
| ENVL_MMC, |
| ENVL_NAND, |
| ENVL_NVRAM, |
| ENVL_ONENAND, |
| ENVL_REMOTE, |
| ENVL_SPI_FLASH, |
| ENVL_UBI, |
| ENVL_NOWHERE, |
| |
| ENVL_COUNT, |
| }; |
| |
| /* value for the various operations we want to perform on the env */ |
| enum env_operation { |
| ENVOP_GET_CHAR, /* we want to call the get_char function */ |
| ENVOP_INIT, /* we want to call the init function */ |
| ENVOP_LOAD, /* we want to call the load function */ |
| ENVOP_SAVE, /* we want to call the save function */ |
| ENVOP_ERASE, /* we want to call the erase function */ |
| }; |
| |
| struct env_driver { |
| const char *name; |
| enum env_location location; |
| |
| /** |
| * load() - Load the environment from storage |
| * |
| * This method is optional. If not provided, no environment will be |
| * loaded. |
| * |
| * @return 0 if OK, -ve on error |
| */ |
| int (*load)(void); |
| |
| /** |
| * save() - Save the environment to storage |
| * |
| * This method is required for 'saveenv' to work. |
| * |
| * @return 0 if OK, -ve on error |
| */ |
| int (*save)(void); |
| |
| /** |
| * erase() - Erase the environment on storage |
| * |
| * This method is optional and required for 'eraseenv' to work. |
| * |
| * @return 0 if OK, -ve on error |
| */ |
| int (*erase)(void); |
| |
| /** |
| * init() - Set up the initial pre-relocation environment |
| * |
| * This method is optional. |
| * |
| * @return 0 if OK, -ENOENT if no initial environment could be found, |
| * other -ve on error |
| */ |
| int (*init)(void); |
| }; |
| |
| /* Declare a new environment location driver */ |
| #define U_BOOT_ENV_LOCATION(__name) \ |
| ll_entry_declare(struct env_driver, __name, env_driver) |
| |
| /* Declare the name of a location */ |
| #ifdef CONFIG_CMD_SAVEENV |
| #define ENV_NAME(_name) .name = _name, |
| #else |
| #define ENV_NAME(_name) |
| #endif |
| |
| #ifdef CONFIG_CMD_SAVEENV |
| #define env_save_ptr(x) x |
| #else |
| #define env_save_ptr(x) NULL |
| #endif |
| |
| #define ENV_SAVE_PTR(x) (CONFIG_IS_ENABLED(SAVEENV) ? (x) : NULL) |
| |
| extern struct hsearch_data env_htab; |
| |
| /** |
| * env_get_location()- Provide the best location for the U-Boot environment |
| * |
| * It is a weak function allowing board to overidde the environment location |
| * |
| * @op: operations performed on the environment |
| * @prio: priority between the multiple environments, 0 being the |
| * highest priority |
| * @return an enum env_location value on success, or -ve error code. |
| */ |
| enum env_location env_get_location(enum env_operation op, int prio); |
| #endif /* DO_DEPS_ONLY */ |
| |
| #endif /* _ENV_INTERNAL_H_ */ |