blob: 0607f959da4931b37e61e5f7990b176d3504b4cd [file] [log] [blame]
source "drivers/net/phy/Kconfig"
source "drivers/net/pfe_eth/Kconfig"
source "drivers/net/fsl-mc/Kconfig"
config ETH
def_bool y
config DM_ETH
bool
depends on DM
help
Enable driver model for Ethernet.
The eth_*() interface will be implemented by the UCLASS_ETH class
This is currently implemented in net/eth-uclass.c
Look in include/net.h for details.
config SPL_DM_ETH
depends on SPL_NET
def_bool y
config DM_MDIO
bool "Enable Driver Model for MDIO devices"
depends on PHYLIB
help
Enable driver model for MDIO devices
Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
stand-alone devices. Useful in particular for systems that support
DM_ETH and have a stand-alone MDIO hardware block shared by multiple
Ethernet interfaces.
This is currently implemented in net/mdio-uclass.c
Look in include/miiphy.h for details.
config DM_MDIO_MUX
bool "Enable Driver Model for MDIO MUX devices"
depends on DM_MDIO
help
Enable driver model for MDIO MUX devices
Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
systems that support DM_MDIO and integrate one or multiple muxes on
the MDIO bus.
This is currently implemented in net/mdio-mux-uclass.c
Look in include/miiphy.h for details.
config DM_DSA
bool "Enable Driver Model for DSA switches"
depends on DM_MDIO
depends on PHY_FIXED
help
Enable driver model for DSA switches
Adds UCLASS_DSA class supporting switches that follow the Distributed
Switch Architecture (DSA). These switches rely on the presence of a
management switch port connected to an Ethernet controller capable of
receiving frames from the switch. This host Ethernet controller is
called the "master" Ethernet interface in DSA terminology.
This is currently implemented in net/dsa-uclass.c, refer to
include/net/dsa.h for API details.
config MDIO_SANDBOX
depends on DM_MDIO && SANDBOX
default y
bool "Sandbox: Mocked MDIO driver"
help
This driver implements dummy read/write/reset MDIO functions mimicking
a bus with a single PHY.
This driver is used in for testing in test/dm/mdio.c
config MDIO_MUX_SANDBOX
depends on DM_MDIO_MUX && MDIO_SANDBOX
default y
bool "Sandbox: Mocked MDIO-MUX driver"
help
This driver implements dummy select/deselect ops mimicking a MUX on
the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
This driver is used for testing in test/dm/mdio.c
config DM_ETH_PHY
bool "Enable Driver Model for Ethernet Generic PHY drivers"
depends on DM
help
Enable driver model for Ethernet Generic PHY .
config DSA_SANDBOX
depends on DM_DSA && SANDBOX
default y
bool "Sandbox: Mocked DSA driver"
help
This driver implements a dummy DSA switch connected to a dummy sandbox
Ethernet device used as DSA master, to test DSA class code, including
exported DSA API and datapath processing of Ethernet traffic.
menuconfig NETDEVICES
bool "Network device support"
depends on NET
select DM_ETH
help
You must select Y to enable any network device support
Generally if you have any networking support this is a given
If unsure, say Y
if NETDEVICES
config PHY_GIGE
bool "Enable GbE PHY status parsing and configuration"
help
Enables support for parsing the status output and for
configuring GbE PHYs (affects the inner workings of some
commands and miiphyutil.c).
config AG7XXX
bool "Atheros AG7xxx Ethernet MAC support"
depends on ARCH_ATH79
select PHYLIB
help
This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
config ALTERA_TSE
bool "Altera Triple-Speed Ethernet MAC support"
select PHYLIB
help
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
Please find details on the "Triple-Speed Ethernet MegaCore Function
Resource Center" of Altera.
config BCM_SF2_ETH
bool "Broadcom SF2 (Starfighter2) Ethernet support"
select PHYLIB
help
This is an abstract framework which provides a generic interface
to MAC and DMA management for multiple Broadcom SoCs such as
Cygnus, NSP and bcm28155_ap platforms.
config BCM_SF2_ETH_DEFAULT_PORT
int "Broadcom SF2 (Starfighter2) Ethernet default port number"
depends on BCM_SF2_ETH
default 0
help
Default port number for the Starfighter2 ethernet driver.
config BCM_SF2_ETH_GMAC
bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
depends on BCM_SF2_ETH
help
This flag enables the ethernet support for Broadcom platforms with
GMAC such as Cygnus. This driver is based on the framework provided
by the BCM_SF2_ETH driver.
Say Y to any bcmcygnus based platforms.
config BCM6348_ETH
bool "BCM6348 EMAC support"
depends on ARCH_BMIPS
select DMA
select DMA_CHANNELS
select MII
select PHYLIB
help
This driver supports the BCM6348 Ethernet MAC.
config BCM6368_ETH
bool "BCM6368 EMAC support"
depends on ARCH_BMIPS
select DMA
select MII
help
This driver supports the BCM6368 Ethernet MAC.
config BCMGENET
bool "BCMGENET V5 support"
select PHYLIB
help
This driver supports the BCMGENET Ethernet MAC.
source "drivers/net/bnxt/Kconfig"
config CORTINA_NI_ENET
bool "Cortina-Access Ethernet driver"
depends on CORTINA_PLATFORM
help
This driver supports the Cortina-Access Ethernet MAC for
all supported CAxxxx SoCs.
config CALXEDA_XGMAC
bool "Calxeda XGMAC support"
help
This driver supports the XGMAC in Calxeda Highbank and Midway
machines.
config DRIVER_DM9000
bool "Davicom DM9000 controller driver"
help
The Davicom DM9000 parallel bus external ethernet interface chip.
config DM9000_BYTE_SWAPPED
bool "Byte swapped access for DM9000"
depends on DRIVER_DM9000
config DM9000_NO_SROM
bool "No SROM on DM9000"
depends on DRIVER_DM9000
config DM9000_USE_16BIT
bool "Use 16bit access in DM9000"
depends on DRIVER_DM9000
config DWC_ETH_QOS
bool "Synopsys DWC Ethernet QOS device support"
select PHYLIB
help
This driver supports the Synopsys Designware Ethernet QOS (Quality
Of Service) IP block. The IP supports many options for bus type,
clocking/reset structure, and feature list.
config DWC_ETH_QOS_IMX
bool "Synopsys DWC Ethernet QOS device support for IMX"
depends on DWC_ETH_QOS
help
The Synopsys Designware Ethernet QOS IP block with the specific
configuration used in IMX soc.
config DWC_ETH_QOS_STM32
bool "Synopsys DWC Ethernet QOS device support for STM32"
depends on DWC_ETH_QOS
select DM_ETH_PHY
default y if ARCH_STM32MP
help
The Synopsys Designware Ethernet QOS IP block with the specific
configuration used in STM32MP soc.
config DWC_ETH_QOS_TEGRA186
bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
depends on DWC_ETH_QOS
default y if TEGRA186
help
The Synopsys Designware Ethernet QOS IP block with specific
configuration used in NVIDIA's Tegra186 chip.
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
depends on PCI
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
config E1000_NO_NVM
bool "Intel PRO/1000 has no NVMEM / EEPROM"
depends on E1000
config E1000_SPI_GENERIC
bool "Allow access to the Intel 8257x SPI bus"
depends on E1000
help
Allow generic access to the SPI bus on the Intel 8257x, for
example with the "sspi" command.
config E1000_SPI
bool "Enable SPI bus utility code"
depends on E1000
help
Utility code for direct access to the SPI bus on Intel 8257x.
This does not do anything useful unless you set at least one
of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
config CMD_E1000
bool "Enable the e1000 command"
depends on E1000
help
This enables the 'e1000' management command for E1000 devices. When
used on devices with SPI support you can reprogram the EEPROM from
U-Boot.
config EEPRO100
bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
help
This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
ethernet family of adapters.
config ETH_SANDBOX
depends on SANDBOX
default y
bool "Sandbox: Mocked Ethernet driver"
help
This driver simply responds with fake ARP replies and ping
replies that are used to verify network stack functionality
This driver is particularly useful in the test/dm/eth.c tests
config ETH_SANDBOX_RAW
depends on SANDBOX
default y
bool "Sandbox: Bridge to Linux Raw Sockets"
help
This driver is a bridge from the bottom of the network stack
in U-Boot to the RAW AF_PACKET API in Linux. This allows real
network traffic to be tested from within sandbox. See
doc/arch/index.rst for more details.
config ETH_DESIGNWARE
bool "Synopsys Designware Ethernet MAC"
select PHYLIB
imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
help
This MAC is present in SoCs from various vendors. It supports
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
provide the PHY (physical media interface).
config ETH_DESIGNWARE_MESON8B
bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
select ETH_DESIGNWARE
help
This provides glue layer to use Synopsys Designware Ethernet MAC
present on the Amlogic Meson8b, GX, AXG & G12A SoCs.
config ETH_DESIGNWARE_SOCFPGA
select REGMAP
select SYSCON
select DW_ALTDESCRIPTOR
bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
depends on ETH_DESIGNWARE
help
The Altera SoCFPGA requires additional configuration of the
Altera system manager to correctly interface with the PHY.
This code handles those SoC specifics.
config ETH_DESIGNWARE_S700
bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
depends on ETH_DESIGNWARE
help
This provides glue layer to use Synopsys Designware Ethernet MAC
present on Actions S700 SoC.
config DW_ALTDESCRIPTOR
bool "Designware Ethernet MAC uses alternate (enhanced) descriptors"
depends on ETH_DESIGNWARE
config ETHOC
bool "OpenCores 10/100 Mbps Ethernet MAC"
help
This MAC is present in OpenRISC and Xtensa XTFPGA boards.
config FEC_MXC_SHARE_MDIO
bool "Share the MDIO bus for FEC controller"
depends on FEC_MXC
config FEC_MXC_MDIO_BASE
hex "MDIO base address for the FEC controller"
depends on FEC_MXC_SHARE_MDIO
help
This specifies the MDIO registers base address. It is used when
two FEC controllers share MDIO bus.
config FEC_MXC
bool "FEC Ethernet controller"
depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || IMX93 || VF610
help
This driver supports the 10/100 Fast Ethernet controller for
NXP i.MX processors.
config FMAN_ENET
bool "Freescale FMan ethernet support"
depends on ARM || PPC
select SYS_FMAN_V3 if ARCH_B4420 || ARCH_B4860 || ARCH_LS1043A || \
ARCH_LS1046A || ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || \
ARCH_T2080 || ARCH_T4240
help
This driver support the Freescale FMan Ethernet controller
config SYS_FMAN_FW_ADDR
hex "FMAN Firmware Address"
depends on FMAN_ENET
default 0x0
config SYS_QE_FMAN_FW_LENGTH
hex "FMAN QE Firmware length"
depends on FMAN_ENET || QE || U_QE
default 0x10000
config SYS_FMAN_V3
bool
select FSL_MEMAC
help
SoC has FMan v3 with mEMAC
config FTMAC100
bool "Ftmac100 Ethernet Support"
help
This MAC is present in Andestech SoCs.
config FTGMAC100
bool "Ftgmac100 Ethernet Support"
select PHYLIB
help
This driver supports the Faraday's FTGMAC100 Gigabit SoC
Ethernet controller that can be found on Aspeed SoCs (which
include NCSI).
It is fully compliant with IEEE 802.3 specification for
10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
Mbps Ethernet and includes Reduced Media Independent
Interface (RMII) and Reduced Gigabit Media Independent
Interface (RGMII) interfaces. It adopts an AHB bus interface
and integrates a link list DMA engine with direct M-Bus
accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000
Mbps mode only supports full duplex), flow control for full
duplex and backpressure for half duplex.
The FTGMAC100 also implements IP, TCP, UDP checksum offloads
and supports IEEE 802.1Q VLAN tag insertion and removal. It
offers high-priority transmit queue for QoS and CoS
applications.
config SYS_DISCOVER_PHY
bool
config MCFFEC
bool "ColdFire Ethernet Support"
select PHYLIB
select SYS_DISCOVER_PHY
help
This driver supports the network interface units in the
ColdFire family.
config SYS_UNIFY_CACHE
depends on MCFFEC
bool "Invalidate icache during ethernet operations"
config FSLDMAFEC
bool "ColdFire DMA Ethernet Support"
select PHYLIB
select SYS_DISCOVER_PHY
help
This driver supports the network interface units in the
ColdFire family.
config KS8851_MLL
bool "Microchip KS8851-MLL controller driver"
help
The Microchip KS8851 parallel bus external ethernet interface chip.
config KSZ9477
bool "Microchip KSZ9477 I2C controller driver"
depends on DM_DSA && DM_I2C
help
This driver implements a DSA switch driver for the KSZ9477 family
of GbE switches using the I2C interface.
config LITEETH
bool "LiteX LiteEth Ethernet MAC"
help
Driver for the LiteEth Ethernet MAC from LiteX.
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
depends on ARCH_KIRKWOOD || ARCH_ORION5X
select PHYLIB
help
This driver supports the network interface units in the
Marvell Orion5x and Kirkwood SoCs
config MVNETA
bool "Marvell Armada XP/385/3700 network interface support"
depends on ARMADA_XP || ARMADA_38X || ARMADA_3700 || ALLEYCAT_5
select PHYLIB
select DM_MDIO
help
This driver supports the network interface units in the
Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
config MVPP2
bool "Marvell Armada 375/7K/8K network interface support"
depends on ARMADA_375 || ARMADA_8K
select PHYLIB
select MVMDIO
select DM_MDIO
help
This driver supports the network interface units in the
Marvell ARMADA 375, 7K and 8K SoCs.
config MACB
bool "Cadence MACB/GEM Ethernet Interface"
select PHYLIB
help
The Cadence MACB ethernet interface is found on many Atmel
AT91 and SAMA5 parts. This driver also supports the Cadence
GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
Say Y to include support for the MACB/GEM chip.
config MACB_ZYNQ
bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
depends on MACB
help
The Cadence MACB ethernet interface was used on Zynq platform.
Say Y to enable support for the MACB/GEM in Zynq chip.
config MT7620_ETH
bool "MediaTek MT7620 Ethernet Interface"
depends on SOC_MT7620
select PHYLIB
select DM_RESET
select DM_GPIO
select CLK
help
The MediaTek MT7620 ethernet interface is used on MT7620 based
boards. It has a built-in switch with two configurable ports which
can connect to external PHY/MACs.
config MT7628_ETH
bool "MediaTek MT7628 Ethernet Interface"
depends on SOC_MT7628
select PHYLIB
help
The MediaTek MT7628 ethernet interface is used on MT7628 and
MT7688 based boards.
config NET_NPCM750
bool "Nuvoton NPCM750 Ethernet MAC"
help
support NPCM750 EMAC
config NET_OCTEON
bool "MIPS Octeon ethernet support"
depends on ARCH_OCTEON
help
You must select Y to enable network device support for
MIPS Octeon SoCs. If unsure, say n
config NET_OCTEONTX
bool "OcteonTX Ethernet support"
depends on ARCH_OCTEONTX
depends on PCI_SRIOV
help
You must select Y to enable network device support for
OcteonTX SoCs. If unsure, say n
config NET_OCTEONTX2
bool "OcteonTX2 Ethernet support"
depends on ARCH_OCTEONTX2
select OCTEONTX2_CGX_INTF
help
You must select Y to enable network device support for
OcteonTX2 SoCs. If unsure, say n
config OCTEONTX_SMI
bool "OcteonTX SMI Device support"
depends on ARCH_OCTEONTX || ARCH_OCTEONTX2
help
You must select Y to enable SMI controller support for
OcteonTX or OcteonTX2 SoCs. If unsure, say n
config OCTEONTX2_CGX_INTF
bool "OcteonTX2 CGX ATF interface support"
depends on ARCH_OCTEONTX2
default y if ARCH_OCTEONTX2
help
You must select Y to enable CGX ATF interface support for
OcteonTX2 SoCs. If unsure, say n
config PCH_GBE
bool "Intel Platform Controller Hub EG20T GMAC driver"
select PHYLIB
help
This MAC is present in Intel Platform Controller Hub EG20T. It
supports 10/100/1000 Mbps operation.
config RGMII
bool "Enable RGMII"
help
Enable the support of the Reduced Gigabit Media-Independent
Interface (RGMII).
config MII
bool "Enable MII"
help
Enable support of the Media-Independent Interface (MII)
config RMII
bool "Enable RMII"
help
Enable support of the Reduced Media-Independent Interface (MII)
config PCNET
bool "AMD PCnet series Ethernet controller driver"
help
This driver supports AMD PCnet series fast ethernet family of
PCI chipsets/adapters.
source "drivers/net/qe/Kconfig"
config RTL8139
bool "Realtek 8139 series Ethernet controller driver"
help
This driver supports Realtek 8139 series fast ethernet family of
PCI chipsets/adapters.
config RTL8169
bool "Realtek 8169 series Ethernet controller driver"
help
This driver supports Realtek 8169 series gigabit ethernet family of
PCI/PCIe chipsets/adapters.
config SJA1105
bool "NXP SJA1105 Ethernet switch family driver"
depends on DM_DSA && DM_SPI
select BITREVERSE
help
This is the driver for the NXP SJA1105 automotive Ethernet switch
family. These are 5-port devices and are managed over an SPI
interface. Probing is handled based on OF bindings. The driver
supports the following revisions:
- SJA1105E (Gen. 1, No TT-Ethernet)
- SJA1105T (Gen. 1, TT-Ethernet)
- SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
- SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
- SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
- SJA1105S (Gen. 2, SGMII, TT-Ethernet)
config SMC911X
bool "SMSC LAN911x and LAN921x controller driver"
config SMC911X_32_BIT
bool "Enable SMC911X 32-bit interface"
depends on SMC911X
help
Define this if data bus is 32 bits. If your processor use a
narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
words, leave this to "n".
config SUN7I_GMAC
bool "Enable Allwinner GMAC Ethernet support"
help
Enable the support for Sun7i GMAC Ethernet controller
config SUN7I_GMAC_FORCE_TXERR
bool "Force PA17 as gmac function"
depends on SUN7I_GMAC
help
Some ethernet phys needs TXERR control. Since the GMAC
doesn't have such signal, setting PA17 as GMAC function
makes the pin output low, which enables data transmission.
config SUN4I_EMAC
bool "Allwinner Sun4i Ethernet MAC support"
select PHYLIB
help
This driver supports the Allwinner based SUN4I Ethernet MAC.
config SUN8I_EMAC
bool "Allwinner Sun8i Ethernet MAC support"
select PHYLIB
select PHY_GIGE
help
This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
It can be found in H3/A64/A83T based SoCs and compatible with both
External and Internal PHYs.
config SH_ETHER
bool "Renesas SH Ethernet MAC"
select PHYLIB
help
This driver supports the Ethernet for Renesas SH and ARM SoCs.
source "drivers/net/ti/Kconfig"
config TULIP
bool "DEC Tulip DC2114x Ethernet support"
help
This driver supports DEC DC2114x Fast ethernet chips.
config XILINX_AXIEMAC
select PHYLIB
select MII
bool "Xilinx AXI Ethernet"
help
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config XILINX_AXIMRMAC
depends on ARCH_VERSAL
bool "Xilinx AXI MRMAC"
help
MRMAC is a high performance, low latency, adaptable Ethernet
integrated hard IP. This can be configured up to four ports with MAC
rates from 10GE to 100GE. This could be present in some of the Xilinx
Versal designs.
config VSC7385_ENET
bool "Vitesse 7385 Switch Firmware Upload driver"
config VSC9953
bool "Vitesse VSC9953 L2 Switch driver"
config XILINX_EMACLITE
select PHYLIB
select MII
bool "Xilinx Ethernetlite"
help
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config ZYNQ_GEM
select PHYLIB
bool "Xilinx Ethernet GEM"
help
This MAC is present in Xilinx Zynq and ZynqMP SoCs.
config PIC32_ETH
bool "Microchip PIC32 Ethernet Support"
depends on MACH_PIC32
select PHYLIB
help
This driver implements 10/100 Mbps Ethernet and MAC layer for
Microchip PIC32 microcontrollers.
config GMAC_ROCKCHIP
bool "Rockchip Synopsys Designware Ethernet MAC"
depends on ETH_DESIGNWARE
help
This driver provides Rockchip SoCs network support based on the
Synopsys Designware driver.
config RENESAS_RAVB
bool "Renesas Ethernet AVB MAC"
depends on RCAR_GEN3
select PHYLIB
help
This driver implements support for the Ethernet AVB block in
Renesas M3 and H3 SoCs.
config MPC8XX_FEC
bool "Fast Ethernet Controller on MPC8XX"
depends on MPC8xx
select MII
select SYS_DISCOVER_PHY
help
This driver implements support for the Fast Ethernet Controller
on MPC8XX
config SNI_AVE
bool "Socionext AVE Ethernet support"
depends on ARCH_UNIPHIER
select PHYLIB
select SYSCON
select REGMAP
help
This driver implements support for the Socionext AVE Ethernet
controller, as found on the Socionext UniPhier family.
config SNI_NETSEC
bool "Socionext NETSEC Ethernet support"
depends on SYNQUACER_SPI
select PHYLIB
help
This driver implements support for the Socionext SynQuacer NETSEC
ethernet controller, as found on the Socionext SynQuacer family.
source "drivers/net/mscc_eswitch/Kconfig"
config ETHER_ON_FEC1
bool "FEC1"
depends on MPC8XX_FEC
default y
config FEC1_PHY
int "FEC1 PHY"
depends on ETHER_ON_FEC1
default -1
help
Define to the hardcoded PHY address which corresponds
to the given FEC; i. e.
#define CONFIG_FEC1_PHY 4
means that the PHY with address 4 is connected to FEC1
When set to -1, means to probe for first available.
config PHY_NORXERR
bool "PHY_NORXERR"
depends on ETHER_ON_FEC1
help
The PHY does not have a RXERR line (RMII only).
(so program the FEC to ignore it).
config ETHER_ON_FEC2
bool "FEC2"
depends on MPC8XX_FEC && MPC885
default y
config FEC2_PHY
int "FEC2 PHY"
depends on ETHER_ON_FEC2
default -1
help
Define to the hardcoded PHY address which corresponds
to the given FEC; i. e.
#define CONFIG_FEC1_PHY 4
means that the PHY with address 4 is connected to FEC1
When set to -1, means to probe for first available.
config FEC2_PHY_NORXERR
bool "PHY_NORXERR"
depends on ETHER_ON_FEC2
help
The PHY does not have a RXERR line (RMII only).
(so program the FEC to ignore it).
config SYS_DPAA_QBMAN
bool "Device tree fixup for QBMan on freescale SOCs"
depends on (ARM || PPC) && !SPL_BUILD
default y if ARCH_B4860 || \
ARCH_B4420 || \
ARCH_P1023 || \
ARCH_P2041 || \
ARCH_T1024 || \
ARCH_T1040 || \
ARCH_T1042 || \
ARCH_T2080 || \
ARCH_T4240 || \
ARCH_P4080 || \
ARCH_P3041 || \
ARCH_P5040 || \
ARCH_LS1043A || \
ARCH_LS1046A
help
QBman fixups to allow deep sleep in DPAA 1 SOCs
config SYS_FSL_QMAN_V3
bool # QMAN version 3
depends on SYS_DPAA_QBMAN
config TSEC_ENET
select PHYLIB
bool "Enable Three-Speed Ethernet Controller"
help
This driver implements support for the (Enhanced) Three-Speed
Ethernet Controller found on Freescale SoCs.
config MEDIATEK_ETH
bool "MediaTek Ethernet GMAC Driver"
select PHYLIB
select DM_GPIO
select DM_RESET
help
This Driver support MediaTek Ethernet GMAC
Say Y to enable support for the MediaTek Ethernet GMAC.
config HIGMACV300_ETH
bool "HiSilicon Gigabit Ethernet Controller"
select DM_RESET
select PHYLIB
help
This driver supports HIGMACV300 Ethernet controller found on
HiSilicon SoCs.
config FSL_ENETC
bool "NXP ENETC Ethernet controller"
depends on DM_MDIO
help
This driver supports the NXP ENETC Ethernet controller found on some
of the NXP SoCs.
config MDIO_MUX_I2CREG
bool "MDIO MUX accessed as a register over I2C"
depends on DM_MDIO_MUX && DM_I2C
help
This driver is used for MDIO muxes driven by writing to a register of
an I2C chip. The board it was developed for uses a mux controlled by
on-board FPGA which in turn is accessed as a chip over I2C.
config MDIO_IPQ4019
bool "Qualcomm IPQ4019 MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO interface found in Qualcomm
IPQ40xx series Soc-s.
config MVMDIO
bool "Marvell MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO interface found in the network
interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
This driver is used by the MVPP2 and MVNETA drivers.
config FSL_LS_MDIO
bool "NXP Layerscape MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
on the mEMAC (which supports both Clauses 22 and 45).
config ASPEED_MDIO
bool "Aspeed MDIO interface support"
depends on DM_MDIO
help
This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver
currently supports Clause 22.
config MDIO_MUX_MMIOREG
bool "MDIO MUX accessed as a MMIO register access"
depends on DM_MDIO_MUX
help
This driver is used for MDIO muxes driven by writing to a register in
the MMIO physical memory.
config MDIO_MUX_MESON_G12A
bool "MDIO MUX for Amlogic Meson G12A SoCs"
depends on DM_MDIO_MUX
help
This driver is used for the MDIO mux found on the Amlogic G12A & compatible
SoCs.
endif # NETDEVICES