| /** |
| * @file IxQMgrAqmIf_p.h |
| * |
| * @author Intel Corporation |
| * @date 30-Oct-2001 |
| * |
| * @brief The IxQMgrAqmIf sub-component provides a number of inline |
| * functions for performing I/O on the AQM. |
| * |
| * Because some functions contained in this module are inline and are |
| * used in other modules (within the QMgr component) the definitions are |
| * contained in this header file. The "normal" use of inline functions |
| * is to use the inline functions in the module in which they are |
| * defined. In this case these inline functions are used in external |
| * modules and therefore the use of "inline extern". What this means |
| * is as follows: if a function foo is declared as "inline extern"this |
| * definition is only used for inlining, in no case is the function |
| * compiled on its own. If the compiler cannot inline the function it |
| * becomes an external reference. Therefore in IxQMgrAqmIf.c all |
| * inline functions are defined without the "inline extern" specifier |
| * and so define the external references. In all other modules these |
| * funtions are defined as "inline extern". |
| * |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Intel Corporation nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * @par |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * @par |
| * -- End of Copyright Notice -- |
| */ |
| |
| #ifndef IXQMGRAQMIF_P_H |
| #define IXQMGRAQMIF_P_H |
| |
| #include "IxOsalTypes.h" |
| |
| /* |
| * inline definition |
| */ |
| |
| #ifdef IX_OSAL_INLINE_ALL |
| /* If IX_OSAL_INLINE_ALL is set then each inlineable API functions will be defined as |
| inline functions */ |
| #define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN |
| #else |
| #ifdef IXQMGRAQMIF_C |
| #ifndef IX_QMGR_AQMIF_INLINE |
| #define IX_QMGR_AQMIF_INLINE |
| #endif |
| #else |
| #ifndef IX_QMGR_AQMIF_INLINE |
| #define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN |
| #endif |
| #endif /* IXQMGRAQMIF_C */ |
| #endif /* IX_OSAL_INLINE */ |
| |
| |
| /* |
| * User defined include files. |
| */ |
| #include "IxQMgr.h" |
| #include "IxQMgrLog_p.h" |
| #include "IxQMgrQCfg_p.h" |
| |
| /* Because this file contains inline functions which will be compiled into |
| * other components, we need to ensure that the IX_COMPONENT_NAME define |
| * is set to ix_qmgr while this code is being compiled. This will ensure |
| * that the correct implementation is provided for the memory access macros |
| * IX_OSAL_READ_LONG and IX_OSAL_WRITE_LONG which are used in this file. |
| * This must be done before including "IxOsalMemAccess.h" |
| */ |
| #define IX_QMGR_AQMIF_SAVED_COMPONENT_NAME IX_COMPONENT_NAME |
| #undef IX_COMPONENT_NAME |
| #define IX_COMPONENT_NAME ix_qmgr |
| #include "IxOsal.h" |
| |
| /* |
| * #defines and macros used in this file. |
| */ |
| |
| /* Number of bytes per word */ |
| #define IX_QMGR_NUM_BYTES_PER_WORD 4 |
| |
| /* Underflow bit mask */ |
| #define IX_QMGR_UNDERFLOW_BIT_OFFSET 0x0 |
| |
| /* Overflow bit mask */ |
| #define IX_QMGR_OVERFLOW_BIT_OFFSET 0x1 |
| |
| /* Queue access register, queue 0 */ |
| #define IX_QMGR_QUEACC0_OFFSET 0x0000 |
| |
| /* Size of queue access register in words */ |
| #define IX_QMGR_QUEACC_SIZE 0x4/*words*/ |
| |
| /* Queue status register, queues 0-7 */ |
| #define IX_QMGR_QUELOWSTAT0_OFFSET (IX_QMGR_QUEACC0_OFFSET +\ |
| (IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD)) |
| |
| /* Queue status register, queues 8-15 */ |
| #define IX_QMGR_QUELOWSTAT1_OFFSET (IX_QMGR_QUELOWSTAT0_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue status register, queues 16-23 */ |
| #define IX_QMGR_QUELOWSTAT2_OFFSET (IX_QMGR_QUELOWSTAT1_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue status register, queues 24-31 */ |
| #define IX_QMGR_QUELOWSTAT3_OFFSET (IX_QMGR_QUELOWSTAT2_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue status register Q status bits mask */ |
| #define IX_QMGR_QUELOWSTAT_QUE_STS_BITS_MASK 0xF |
| |
| /* Size of queue 0-31 status register */ |
| #define IX_QMGR_QUELOWSTAT_SIZE 0x4 /*words*/ |
| |
| /* The number of queues' status specified per word */ |
| #define IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD 0x8 |
| |
| /* Queue UF/OF status register queues 0-15 */ |
| #define IX_QMGR_QUEUOSTAT0_OFFSET (IX_QMGR_QUELOWSTAT3_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| /* Queue UF/OF status register queues 16-31 */ |
| #define IX_QMGR_QUEUOSTAT1_OFFSET (IX_QMGR_QUEUOSTAT0_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* The number of queues' underflow/overflow status specified per word */ |
| #define IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD 0x10 |
| |
| /* Queue NE status register, queues 32-63 */ |
| #define IX_QMGR_QUEUPPSTAT0_OFFSET (IX_QMGR_QUEUOSTAT1_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue F status register, queues 32-63 */ |
| #define IX_QMGR_QUEUPPSTAT1_OFFSET (IX_QMGR_QUEUPPSTAT0_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Size of queue 32-63 status register */ |
| #define IX_QMGR_QUEUPPSTAT_SIZE 0x2 /*words*/ |
| |
| /* The number of queues' status specified per word */ |
| #define IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD 0x20 |
| |
| /* Queue INT source select register, queues 0-7 */ |
| #define IX_QMGR_INT0SRCSELREG0_OFFSET (IX_QMGR_QUEUPPSTAT1_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue INT source select register, queues 8-15 */ |
| #define IX_QMGR_INT0SRCSELREG1_OFFSET (IX_QMGR_INT0SRCSELREG0_OFFSET+\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue INT source select register, queues 16-23 */ |
| #define IX_QMGR_INT0SRCSELREG2_OFFSET (IX_QMGR_INT0SRCSELREG1_OFFSET+\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue INT source select register, queues 24-31 */ |
| #define IX_QMGR_INT0SRCSELREG3_OFFSET (IX_QMGR_INT0SRCSELREG2_OFFSET+\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Size of interrupt source select reegister */ |
| #define IX_QMGR_INT0SRCSELREG_SIZE 0x4 /*words*/ |
| |
| /* The number of queues' interrupt source select specified per word*/ |
| #define IX_QMGR_INTSRC_NUM_QUE_PER_WORD 0x8 |
| |
| /* Queue INT enable register, queues 0-31 */ |
| #define IX_QMGR_QUEIEREG0_OFFSET (IX_QMGR_INT0SRCSELREG3_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue INT enable register, queues 32-63 */ |
| #define IX_QMGR_QUEIEREG1_OFFSET (IX_QMGR_QUEIEREG0_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue INT register, queues 0-31 */ |
| #define IX_QMGR_QINTREG0_OFFSET (IX_QMGR_QUEIEREG1_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Queue INT register, queues 32-63 */ |
| #define IX_QMGR_QINTREG1_OFFSET (IX_QMGR_QINTREG0_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Size of interrupt register */ |
| #define IX_QMGR_QINTREG_SIZE 0x2 /*words*/ |
| |
| /* Number of queues' status specified per word */ |
| #define IX_QMGR_QINTREG_NUM_QUE_PER_WORD 0x20 |
| |
| /* Number of bits per queue interrupt status */ |
| #define IX_QMGR_QINTREG_BITS_PER_QUEUE 0x1 |
| #define IX_QMGR_QINTREG_BIT_OFFSET 0x1 |
| |
| /* Size of address space not used by AQM */ |
| #define IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES 0x1bC0 |
| |
| /* Queue config register, queue 0 */ |
| #define IX_QMGR_QUECONFIG_BASE_OFFSET (IX_QMGR_QINTREG1_OFFSET +\ |
| IX_QMGR_NUM_BYTES_PER_WORD +\ |
| IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES) |
| |
| /* Total size of configuration words */ |
| #define IX_QMGR_QUECONFIG_SIZE 0x100 |
| |
| /* Start of SRAM queue buffer space */ |
| #define IX_QMGR_QUEBUFFER_SPACE_OFFSET (IX_QMGR_QUECONFIG_BASE_OFFSET +\ |
| IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_NUM_BYTES_PER_WORD) |
| |
| /* Total bits in a word */ |
| #define BITS_PER_WORD 32 |
| |
| /* Size of queue buffer space */ |
| #define IX_QMGR_QUE_BUFFER_SPACE_SIZE 0x1F00 |
| |
| /* |
| * This macro will return the address of the access register for the |
| * queue specified by qId |
| */ |
| #define IX_QMGR_Q_ACCESS_ADDR_GET(qId)\ |
| (((qId) * (IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD))\ |
| + IX_QMGR_QUEACC0_OFFSET) |
| |
| /* |
| * Bit location of bit-3 of INT0SRCSELREG0 register to enabled |
| * sticky interrupt register. |
| */ |
| #define IX_QMGR_INT0SRCSELREG0_BIT3 3 |
| |
| /* |
| * Variable declerations global to this file. Externs are followed by |
| * statics. |
| */ |
| extern UINT32 aqmBaseAddress; |
| |
| /* |
| * Function declarations. |
| */ |
| void |
| ixQMgrAqmIfInit (void); |
| |
| void |
| ixQMgrAqmIfUninit (void); |
| |
| unsigned |
| ixQMgrAqmIfLog2 (unsigned number); |
| |
| void |
| ixQMgrAqmIfQRegisterBitsWrite (IxQMgrQId qId, |
| UINT32 registerBaseAddrOffset, |
| unsigned queuesPerRegWord, |
| UINT32 value); |
| |
| void |
| ixQMgrAqmIfQStatusCheckValsCalc (IxQMgrQId qId, |
| IxQMgrSourceId srcSel, |
| unsigned int *statusWordOffset, |
| UINT32 *checkValue, |
| UINT32 *mask); |
| /* |
| * The Xscale software allways deals with logical addresses and so the |
| * base address of the AQM memory space is not a hardcoded value. This |
| * function must be called before any other function in this component. |
| * NO CHECKING is performed to ensure that the base address has been |
| * set. |
| */ |
| void |
| ixQMgrAqmIfBaseAddressSet (UINT32 address); |
| |
| /* |
| * Get the base address of the AQM memory space. |
| */ |
| void |
| ixQMgrAqmIfBaseAddressGet (UINT32 *address); |
| |
| /* |
| * Get the sram base address |
| */ |
| void |
| ixQMgrAqmIfSramBaseAddressGet (UINT32 *address); |
| |
| /* |
| * Read a queue status |
| */ |
| void |
| ixQMgrAqmIfQueStatRead (IxQMgrQId qId, |
| IxQMgrQStatus* status); |
| |
| |
| /* |
| * Set INT0SRCSELREG0 Bit3 |
| */ |
| void ixQMgrAqmIfIntSrcSelReg0Bit3Set (void); |
| |
| |
| /* |
| * Set the interrupt source |
| */ |
| void |
| ixQMgrAqmIfIntSrcSelWrite (IxQMgrQId qId, |
| IxQMgrSourceId sourceId); |
| |
| /* |
| * Enable interruptson a queue |
| */ |
| void |
| ixQMgrAqmIfQInterruptEnable (IxQMgrQId qId); |
| |
| /* |
| * Disable interrupt on a quee |
| */ |
| void |
| ixQMgrAqmIfQInterruptDisable (IxQMgrQId qId); |
| |
| /* |
| * Write the config register of the specified queue |
| */ |
| void |
| ixQMgrAqmIfQueCfgWrite (IxQMgrQId qId, |
| IxQMgrQSizeInWords qSizeInWords, |
| IxQMgrQEntrySizeInWords entrySizeInWords, |
| UINT32 freeSRAMAddress); |
| |
| /* |
| * read fields from the config of the specified queue. |
| */ |
| void |
| ixQMgrAqmIfQueCfgRead (IxQMgrQId qId, |
| unsigned int numEntries, |
| UINT32 *baseAddress, |
| unsigned int *ne, |
| unsigned int *nf, |
| UINT32 *readPtr, |
| UINT32 *writePtr); |
| |
| /* |
| * Set the ne and nf watermark level on a queue. |
| */ |
| void |
| ixQMgrAqmIfWatermarkSet (IxQMgrQId qId, |
| unsigned ne, |
| unsigned nf); |
| |
| /* Inspect an entry without moving the read pointer */ |
| IX_STATUS |
| ixQMgrAqmIfQPeek (IxQMgrQId qId, |
| unsigned int entryIndex, |
| unsigned int *entry); |
| |
| /* Modify an entry without moving the write pointer */ |
| IX_STATUS |
| ixQMgrAqmIfQPoke (IxQMgrQId qId, |
| unsigned int entryIndex, |
| unsigned int *entry); |
| |
| /* |
| * Function prototype for inline functions. For description refers to |
| * the functions defintion below. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfWordWrite (VUINT32 *address, |
| UINT32 word); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfWordRead (VUINT32 *address, |
| UINT32 *word); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQPop (IxQMgrQId qId, |
| IxQMgrQEntrySizeInWords numWords, |
| UINT32 *entry); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQPush (IxQMgrQId qId, |
| IxQMgrQEntrySizeInWords numWords, |
| UINT32 *entry); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group, |
| UINT32 *qStatusWords); |
| |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords, |
| UINT32 *newQStatusWords, |
| unsigned int statusWordOffset, |
| UINT32 checkValue, |
| UINT32 mask); |
| |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, |
| UINT32 registerBaseAddrOffset, |
| unsigned queuesPerRegWord, |
| unsigned relativeBitOffset, |
| BOOL reset); |
| |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId); |
| |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfOverflowCheck (IxQMgrQId qId); |
| |
| IX_QMGR_AQMIF_INLINE UINT32 |
| ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId, |
| UINT32 registerBaseAddrOffset, |
| unsigned queuesPerRegWord); |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group, |
| UINT32 reg); |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group, |
| UINT32 *regVal); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId, |
| IxQMgrQStatus *status); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId, |
| IxQMgrQStatus *status); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQueStatRead (IxQMgrQId qId, |
| IxQMgrQStatus *qStatus); |
| |
| IX_QMGR_AQMIF_INLINE unsigned |
| ixQMgrAqmIfPow2NumDivide (unsigned numerator, |
| unsigned denominator); |
| |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group, |
| UINT32 *regVal); |
| /* |
| * Inline functions |
| */ |
| |
| /* |
| * This inline function is used by other QMgr components to write one |
| * word to the specified address. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfWordWrite (VUINT32 *address, |
| UINT32 word) |
| { |
| IX_OSAL_WRITE_LONG(address, word); |
| } |
| |
| /* |
| * This inline function is used by other QMgr components to read a |
| * word from the specified address. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfWordRead (VUINT32 *address, |
| UINT32 *word) |
| { |
| *word = IX_OSAL_READ_LONG(address); |
| } |
| |
| |
| /* |
| * This inline function is used by other QMgr components to pop an |
| * entry off the specified queue. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQPop (IxQMgrQId qId, |
| IxQMgrQEntrySizeInWords numWords, |
| UINT32 *entry) |
| { |
| volatile UINT32 *accRegAddr; |
| |
| accRegAddr = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_Q_ACCESS_ADDR_GET(qId)); |
| |
| switch (numWords) |
| { |
| case IX_QMGR_Q_ENTRY_SIZE1: |
| ixQMgrAqmIfWordRead (accRegAddr, entry); |
| break; |
| case IX_QMGR_Q_ENTRY_SIZE2: |
| ixQMgrAqmIfWordRead (accRegAddr++, entry++); |
| ixQMgrAqmIfWordRead (accRegAddr, entry); |
| break; |
| case IX_QMGR_Q_ENTRY_SIZE4: |
| ixQMgrAqmIfWordRead (accRegAddr++, entry++); |
| ixQMgrAqmIfWordRead (accRegAddr++, entry++); |
| ixQMgrAqmIfWordRead (accRegAddr++, entry++); |
| ixQMgrAqmIfWordRead (accRegAddr, entry); |
| break; |
| default: |
| IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPop"); |
| break; |
| } |
| } |
| |
| /* |
| * This inline function is used by other QMgr components to push an |
| * entry to the specified queue. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQPush (IxQMgrQId qId, |
| IxQMgrQEntrySizeInWords numWords, |
| UINT32 *entry) |
| { |
| volatile UINT32 *accRegAddr; |
| |
| accRegAddr = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_Q_ACCESS_ADDR_GET(qId)); |
| |
| switch (numWords) |
| { |
| case IX_QMGR_Q_ENTRY_SIZE1: |
| ixQMgrAqmIfWordWrite (accRegAddr, *entry); |
| break; |
| case IX_QMGR_Q_ENTRY_SIZE2: |
| ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); |
| ixQMgrAqmIfWordWrite (accRegAddr, *entry); |
| break; |
| case IX_QMGR_Q_ENTRY_SIZE4: |
| ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); |
| ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); |
| ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); |
| ixQMgrAqmIfWordWrite (accRegAddr, *entry); |
| break; |
| default: |
| IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPush"); |
| break; |
| } |
| } |
| |
| /* |
| * The AQM interrupt registers contains a bit for each AQM queue |
| * specifying the queue (s) that cause an interrupt to fire. This |
| * function is called by IxQMGrDispatcher component. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group, |
| UINT32 *qStatusWords) |
| { |
| volatile UINT32 *regAddress = NULL; |
| |
| if (group == IX_QMGR_QUELOW_GROUP) |
| { |
| regAddress = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QUELOWSTAT0_OFFSET); |
| |
| ixQMgrAqmIfWordRead (regAddress++, qStatusWords++); |
| ixQMgrAqmIfWordRead (regAddress++, qStatusWords++); |
| ixQMgrAqmIfWordRead (regAddress++, qStatusWords++); |
| ixQMgrAqmIfWordRead (regAddress, qStatusWords); |
| } |
| else /* We have the upper queues */ |
| { |
| /* Only need to read the Nearly Empty status register for |
| * queues 32-63 as for therse queues the interrtupt source |
| * condition is fixed to Nearly Empty |
| */ |
| regAddress = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QUEUPPSTAT0_OFFSET); |
| ixQMgrAqmIfWordRead (regAddress, qStatusWords); |
| } |
| } |
| |
| |
| /* |
| * This function check if the status for a queue has changed between |
| * 2 snapshots and if it has, that the status matches a particular |
| * value after masking. |
| */ |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords, |
| UINT32 *newQStatusWords, |
| unsigned int statusWordOffset, |
| UINT32 checkValue, |
| UINT32 mask) |
| { |
| if (((oldQStatusWords[statusWordOffset] & mask) != |
| (newQStatusWords[statusWordOffset] & mask)) && |
| ((newQStatusWords[statusWordOffset] & mask) == checkValue)) |
| { |
| return TRUE; |
| } |
| |
| return FALSE; |
| } |
| |
| /* |
| * The AQM interrupt register contains a bit for each AQM queue |
| * specifying the queue (s) that cause an interrupt to fire. This |
| * function is called by IxQMgrDispatcher component. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group, |
| UINT32 *regVal) |
| { |
| volatile UINT32 *regAddress; |
| |
| if (group == IX_QMGR_QUELOW_GROUP) |
| { |
| regAddress = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QINTREG0_OFFSET); |
| } |
| else |
| { |
| regAddress = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QINTREG1_OFFSET); |
| } |
| |
| ixQMgrAqmIfWordRead (regAddress, regVal); |
| } |
| |
| /* |
| * The AQM interrupt enable register contains a bit for each AQM queue. |
| * This function reads the interrupt enable register. This |
| * function is called by IxQMgrDispatcher component. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group, |
| UINT32 *regVal) |
| { |
| volatile UINT32 *regAddress; |
| |
| if (group == IX_QMGR_QUELOW_GROUP) |
| { |
| regAddress = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QUEIEREG0_OFFSET); |
| } |
| else |
| { |
| regAddress = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QUEIEREG1_OFFSET); |
| } |
| |
| ixQMgrAqmIfWordRead (regAddress, regVal); |
| } |
| |
| |
| /* |
| * This inline function will read the status bit of a queue |
| * specified by qId. If reset is TRUE the bit is cleared. |
| */ |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, |
| UINT32 registerBaseAddrOffset, |
| unsigned queuesPerRegWord, |
| unsigned relativeBitOffset, |
| BOOL reset) |
| { |
| UINT32 actualBitOffset; |
| volatile UINT32 *registerAddress; |
| UINT32 registerWord; |
| |
| /* |
| * Calculate the registerAddress |
| * multiple queues split accross registers |
| */ |
| registerAddress = (UINT32*)(aqmBaseAddress + |
| registerBaseAddrOffset + |
| ((qId / queuesPerRegWord) * |
| IX_QMGR_NUM_BYTES_PER_WORD)); |
| |
| /* |
| * Get the status word |
| */ |
| ixQMgrAqmIfWordRead (registerAddress, ®isterWord); |
| |
| /* |
| * Calculate the actualBitOffset |
| * status for multiple queues stored in one register |
| */ |
| actualBitOffset = (relativeBitOffset + 1) << |
| ((qId & (queuesPerRegWord - 1)) * (BITS_PER_WORD / queuesPerRegWord)); |
| |
| /* Check if the status bit is set */ |
| if (registerWord & actualBitOffset) |
| { |
| /* Clear the bit if reset */ |
| if (reset) |
| { |
| ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset)); |
| } |
| return TRUE; |
| } |
| |
| /* Bit not set */ |
| return FALSE; |
| } |
| |
| |
| /* |
| * @ingroup IxQmgrAqmIfAPI |
| * |
| * @brief Read the underflow status of a queue |
| * |
| * This inline function will read the underflow status of a queue |
| * specified by qId. |
| * |
| */ |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId) |
| { |
| if (qId < IX_QMGR_MIN_QUEUPP_QID) |
| { |
| return (ixQMgrAqmIfRegisterBitCheck (qId, |
| IX_QMGR_QUEUOSTAT0_OFFSET, |
| IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD, |
| IX_QMGR_UNDERFLOW_BIT_OFFSET, |
| TRUE/*reset*/)); |
| } |
| else |
| { |
| /* Qs 32-63 have no underflow status */ |
| return FALSE; |
| } |
| } |
| |
| /* |
| * This inline function will read the overflow status of a queue |
| * specified by qId. |
| */ |
| IX_QMGR_AQMIF_INLINE BOOL |
| ixQMgrAqmIfOverflowCheck (IxQMgrQId qId) |
| { |
| if (qId < IX_QMGR_MIN_QUEUPP_QID) |
| { |
| return (ixQMgrAqmIfRegisterBitCheck (qId, |
| IX_QMGR_QUEUOSTAT0_OFFSET, |
| IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD, |
| IX_QMGR_OVERFLOW_BIT_OFFSET, |
| TRUE/*reset*/)); |
| } |
| else |
| { |
| /* Qs 32-63 have no overflow status */ |
| return FALSE; |
| } |
| } |
| |
| /* |
| * This inline function will read the status bits of a queue |
| * specified by qId. |
| */ |
| IX_QMGR_AQMIF_INLINE UINT32 |
| ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId, |
| UINT32 registerBaseAddrOffset, |
| unsigned queuesPerRegWord) |
| { |
| volatile UINT32 *registerAddress; |
| UINT32 registerWord; |
| UINT32 statusBitsMask; |
| UINT32 bitsPerQueue; |
| |
| bitsPerQueue = BITS_PER_WORD / queuesPerRegWord; |
| |
| /* |
| * Calculate the registerAddress |
| * multiple queues split accross registers |
| */ |
| registerAddress = (UINT32*)(aqmBaseAddress + |
| registerBaseAddrOffset + |
| ((qId / queuesPerRegWord) * |
| IX_QMGR_NUM_BYTES_PER_WORD)); |
| /* |
| * Read the status word |
| */ |
| ixQMgrAqmIfWordRead (registerAddress, ®isterWord); |
| |
| |
| /* |
| * Calculate the mask for the status bits for this queue. |
| */ |
| statusBitsMask = ((1 << bitsPerQueue) - 1); |
| |
| /* |
| * Shift the status word so it is right justified |
| */ |
| registerWord >>= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue); |
| |
| /* |
| * Mask out all bar the status bits for this queue |
| */ |
| return (registerWord &= statusBitsMask); |
| } |
| |
| /* |
| * This function is called by IxQMgrDispatcher to set the contents of |
| * the AQM interrupt register. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group, |
| UINT32 reg) |
| { |
| volatile UINT32 *address; |
| |
| if (group == IX_QMGR_QUELOW_GROUP) |
| { |
| address = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QINTREG0_OFFSET); |
| } |
| else |
| { |
| address = (UINT32*)(aqmBaseAddress + |
| IX_QMGR_QINTREG1_OFFSET); |
| } |
| |
| ixQMgrAqmIfWordWrite (address, reg); |
| } |
| |
| /* |
| * Read the status of a queue in the range 0-31. |
| * |
| * This function is used by other QMgr components to read the |
| * status of the queue specified by qId. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId, |
| IxQMgrQStatus *status) |
| { |
| /* Read the general status bits */ |
| *status = ixQMgrAqmIfQRegisterBitsRead (qId, |
| IX_QMGR_QUELOWSTAT0_OFFSET, |
| IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD); |
| } |
| |
| /* |
| * This function will read the status of the queue specified |
| * by qId. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId, |
| IxQMgrQStatus *status) |
| { |
| /* Reset the status bits */ |
| *status = 0; |
| |
| /* |
| * Check if the queue is nearly empty, |
| * N.b. QUPP stat register contains status for regs 32-63 at each |
| * bit position so subtract 32 to get bit offset |
| */ |
| if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID), |
| IX_QMGR_QUEUPPSTAT0_OFFSET, |
| IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD, |
| 0/*relativeBitOffset*/, |
| FALSE/*!reset*/)) |
| { |
| *status |= IX_QMGR_Q_STATUS_NE_BIT_MASK; |
| } |
| |
| /* |
| * Check if the queue is full, |
| * N.b. QUPP stat register contains status for regs 32-63 at each |
| * bit position so subtract 32 to get bit offset |
| */ |
| if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID), |
| IX_QMGR_QUEUPPSTAT1_OFFSET, |
| IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD, |
| 0/*relativeBitOffset*/, |
| FALSE/*!reset*/)) |
| { |
| *status |= IX_QMGR_Q_STATUS_F_BIT_MASK; |
| } |
| } |
| |
| /* |
| * This function is used by other QMgr components to read the |
| * status of the queue specified by qId. |
| */ |
| IX_QMGR_AQMIF_INLINE void |
| ixQMgrAqmIfQueStatRead (IxQMgrQId qId, |
| IxQMgrQStatus *qStatus) |
| { |
| if (qId < IX_QMGR_MIN_QUEUPP_QID) |
| { |
| ixQMgrAqmIfQueLowStatRead (qId, qStatus); |
| } |
| else |
| { |
| ixQMgrAqmIfQueUppStatRead (qId, qStatus); |
| } |
| } |
| |
| |
| /* |
| * This function performs a mod division |
| */ |
| IX_QMGR_AQMIF_INLINE unsigned |
| ixQMgrAqmIfPow2NumDivide (unsigned numerator, |
| unsigned denominator) |
| { |
| /* Number is evenly divisable by 2 */ |
| return (numerator >> ixQMgrAqmIfLog2 (denominator)); |
| } |
| |
| /* Restore IX_COMPONENT_NAME */ |
| #undef IX_COMPONENT_NAME |
| #define IX_COMPONENT_NAME IX_QMGR_AQMIF_SAVED_COMPONENT_NAME |
| |
| #endif/*IXQMGRAQMIF_P_H*/ |