| /* |
| * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, |
| */ |
| |
| /* |
| * File: cpu_init.c |
| * |
| * Discription: Contains initialisation functions to setup |
| * the cpu properly |
| * |
| */ |
| |
| #include <common.h> |
| #include <mpc5xx.h> |
| #include <watchdog.h> |
| |
| /* |
| * Setup essential cpu registers to run |
| */ |
| void cpu_init_f (volatile immap_t * immr) |
| { |
| volatile memctl5xx_t *memctl = &immr->im_memctl; |
| ulong reg; |
| |
| /* SYPCR - contains watchdog control. This will enable watchdog */ |
| /* if CONFIG_WATCHDOG is set */ |
| immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR; |
| |
| #if defined(CONFIG_WATCHDOG) |
| reset_5xx_watchdog (immr); |
| #endif |
| |
| /* SIUMCR - contains debug pin configuration */ |
| immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR; |
| |
| /* Initialize timebase. Unlock TBSCRK */ |
| immr->im_sitk.sitk_tbscrk = KAPWR_KEY; |
| immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR; |
| |
| /* Full IMB bus speed */ |
| immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR; |
| |
| /* Time base and decrementer will be enables (TBE) */ |
| /* in init_timebase() in time.c called from board_init_f(). */ |
| |
| /* Initialize the PIT. Unlock PISCRK */ |
| immr->im_sitk.sitk_piscrk = KAPWR_KEY; |
| immr->im_sit.sit_piscr = CONFIG_SYS_PISCR; |
| |
| #if !defined(CONFIG_PATI) |
| /* PATI sest PLL in start.S */ |
| /* PLL (CPU clock) settings */ |
| immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; |
| |
| /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to |
| * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr, |
| * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF |
| * field value. |
| */ |
| #if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0) |
| reg = CONFIG_SYS_PLPRCR; /* reset control bits */ |
| #else |
| reg = immr->im_clkrst.car_plprcr; |
| reg &= PLPRCR_MF_MSK; /* isolate MF field */ |
| reg |= CONFIG_SYS_PLPRCR; /* reset control bits */ |
| #endif |
| immr->im_clkrst.car_plprcr = reg; |
| |
| #endif /* !defined(CONFIG_PATI) */ |
| |
| /* System integration timers. CONFIG_SYS_MASK has EBDF configuration */ |
| immr->im_clkrstk.cark_sccrk = KAPWR_KEY; |
| reg = immr->im_clkrst.car_sccr; |
| reg &= SCCR_MASK; |
| reg |= CONFIG_SYS_SCCR; |
| immr->im_clkrst.car_sccr = reg; |
| |
| /* Memory Controller */ |
| memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; |
| memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM; |
| |
| #if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM)) |
| memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; |
| memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; |
| #endif |
| |
| #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) |
| memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; |
| memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; |
| #endif |
| |
| #if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM) |
| memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; |
| memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; |
| #endif |
| |
| } |
| |
| /* |
| * Initialize higher level parts of cpu |
| */ |
| int cpu_init_r (void) |
| { |
| /* Nothing to do at the moment */ |
| return (0); |
| } |