| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #undef DEBUG |
| |
| #define CONFIG_SH 1 |
| #define CONFIG_SH4 1 |
| #define CONFIG_CPU_SH7751 1 |
| #define CONFIG_CPU_SH_TYPE_R 1 |
| #define CONFIG_R2DPLUS 1 |
| #define __LITTLE_ENDIAN__ 1 |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_DFL |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_FLASH |
| #define CONFIG_CMD_PCI |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_DOS_PARTITION |
| |
| /* SCIF */ |
| #define CONFIG_SCIF_CONSOLE 1 |
| #define CONFIG_BAUDRATE 115200 |
| #define CONFIG_CONS_SCIF1 1 |
| #define BOARD_LATE_INIT 1 |
| |
| #define CONFIG_BOOTDELAY -1 |
| #define CONFIG_BOOTARGS "console=ttySC0,115200" |
| #define CONFIG_ENV_OVERWRITE 1 |
| |
| /* SDRAM */ |
| #define CFG_SDRAM_BASE (0x8C000000) |
| #define CFG_SDRAM_SIZE (0x04000000) |
| |
| #define CFG_LONGHELP |
| #define CFG_PROMPT "=> " |
| #define CFG_CBSIZE 256 |
| #define CFG_PBSIZE 256 |
| #define CFG_MAXARGS 16 |
| #define CFG_BARGSIZE 512 |
| /* List of legal baudrate settings for this board */ |
| #define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } |
| |
| #define CFG_MEMTEST_START (CFG_SDRAM_BASE) |
| #define CFG_MEMTEST_END (TEXT_BASE - 0x100000) |
| |
| #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) |
| /* Address of u-boot image in Flash */ |
| #define CFG_MONITOR_BASE (CFG_FLASH_BASE) |
| #define CFG_MONITOR_LEN (256 * 1024) |
| /* Size of DRAM reserved for malloc() use */ |
| #define CFG_MALLOC_LEN (1024 * 1024) |
| /* size in bytes reserved for initial data */ |
| #define CFG_GBL_DATA_SIZE (256) |
| #define CFG_BOOTMAPSZ (8 * 1024 * 1024) |
| |
| /* |
| * NOR Flash ( Spantion S29GL256P ) |
| */ |
| #define CFG_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CFG_FLASH_BASE (0xA0000000) |
| #define CFG_MAX_FLASH_BANKS (1) |
| #define CFG_MAX_FLASH_SECT 256 |
| #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } |
| |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_SECT_SIZE 0x40000 |
| #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) |
| |
| /* |
| * SuperH Clock setting |
| */ |
| #define CONFIG_SYS_CLK_FREQ 60000000 |
| #define TMU_CLK_DIVIDER 4 |
| #define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) |
| #define CFG_PLL_SETTLING_TIME 100/* in us */ |
| |
| /* |
| * IDE support |
| */ |
| #define CONFIG_IDE_RESET 1 |
| #define CFG_PIO_MODE 1 |
| #define CFG_IDE_MAXBUS 1 /* IDE bus */ |
| #define CFG_IDE_MAXDEVICE 1 |
| #define CFG_ATA_BASE_ADDR 0xb4000000 |
| #define CFG_ATA_STRIDE 2 /* 1bit shift */ |
| #define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ |
| #define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ |
| #define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ |
| |
| /* |
| * SuperH PCI Bridge Configration |
| */ |
| #define CONFIG_PCI |
| #define CONFIG_SH4_PCI |
| #define CONFIG_SH7751_PCI |
| #define CONFIG_PCI_PNP |
| #define CONFIG_PCI_SCAN_SHOW 1 |
| #define __io |
| #define __mem_pci |
| |
| #define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ |
| #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS |
| #define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ |
| #define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ |
| #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS |
| #define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ |
| |
| /* |
| * Network device (RTL8139) support |
| */ |
| #define CONFIG_NET_MULTI |
| #define CONFIG_RTL8139 |
| #define _IO_BASE 0x00000000 |
| #define KSEG1ADDR(x) (x) |
| |
| #endif /* __CONFIG_H */ |