| /* |
| * (C) Copyright 2007-2008 Michal Simek |
| * |
| * Michal SIMEK <monstr@monstr.eu> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include "../board/xilinx/ml401/xparameters.h" |
| |
| #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ |
| #define MICROBLAZE_V5 1 |
| #define CONFIG_ML401 1 /* ML401 Board */ |
| |
| /* uart */ |
| #ifdef XILINX_UARTLITE_BASEADDR |
| #define CONFIG_XILINX_UARTLITE |
| #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR |
| #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE |
| #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } |
| #else |
| #ifdef XILINX_UART16550_BASEADDR |
| #define CFG_NS16550 |
| #define CFG_NS16550_SERIAL |
| #define CFG_NS16550_REG_SIZE 4 |
| #define CONFIG_CONS_INDEX 1 |
| #define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR |
| #define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ |
| #define CONFIG_BAUDRATE 115200 |
| #define CFG_BAUDRATE_TABLE { 9600, 115200 } |
| #endif |
| #endif |
| |
| /* setting reset address */ |
| /*#define CFG_RESET_ADDRESS TEXT_BASE*/ |
| |
| /* ethernet */ |
| #ifdef XILINX_EMAC_BASEADDR |
| #define CONFIG_XILINX_EMAC 1 |
| #define CFG_ENET |
| #else |
| #ifdef XILINX_EMACLITE_BASEADDR |
| #define CONFIG_XILINX_EMACLITE 1 |
| #define CFG_ENET |
| #endif |
| #endif |
| #undef ET_DEBUG |
| |
| /* gpio */ |
| #ifdef XILINX_GPIO_BASEADDR |
| #define CFG_GPIO_0 1 |
| #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR |
| #endif |
| |
| /* interrupt controller */ |
| #ifdef XILINX_INTC_BASEADDR |
| #define CFG_INTC_0 1 |
| #define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR |
| #define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS |
| #endif |
| |
| /* timer */ |
| #ifdef XILINX_TIMER_BASEADDR |
| #if (XILINX_TIMER_IRQ != -1) |
| #define CFG_TIMER_0 1 |
| #define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR |
| #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ |
| #define FREQUENCE XILINX_CLOCK_FREQ |
| #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) |
| #endif |
| #else |
| #ifdef XILINX_CLOCK_FREQ |
| #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ |
| #else |
| #error BAD CLOCK FREQ |
| #endif |
| #endif |
| /* FSL */ |
| /* #define CFG_FSL_2 */ |
| /* #define FSL_INTR_2 1 */ |
| |
| /* |
| * memory layout - Example |
| * TEXT_BASE = 0x1200_0000; |
| * CFG_SRAM_BASE = 0x1000_0000; |
| * CFG_SRAM_SIZE = 0x0400_0000; |
| * |
| * CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 |
| * CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000 |
| * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000 |
| * |
| * 0x1000_0000 CFG_SDRAM_BASE |
| * FREE |
| * 0x1200_0000 TEXT_BASE |
| * U-BOOT code |
| * 0x1202_0000 |
| * FREE |
| * |
| * STACK |
| * 0x13F7_F000 CFG_MALLOC_BASE |
| * MALLOC_AREA 256kB Alloc |
| * 0x11FB_F000 CFG_MONITOR_BASE |
| * MONITOR_CODE 256kB Env |
| * 0x13FF_F000 CFG_GBL_DATA_OFFSET |
| * GLOBAL_DATA 4kB bd, gd |
| * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE |
| */ |
| |
| /* ddr sdram - main memory */ |
| #define CFG_SDRAM_BASE XILINX_RAM_START |
| #define CFG_SDRAM_SIZE XILINX_RAM_SIZE |
| #define CFG_MEMTEST_START CFG_SDRAM_BASE |
| #define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) |
| |
| /* global pointer */ |
| #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ |
| /* start of global data */ |
| #define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) |
| |
| /* monitor code */ |
| #define SIZE 0x40000 |
| #define CFG_MONITOR_LEN SIZE |
| #define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) |
| #define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) |
| #define CFG_MALLOC_LEN SIZE |
| #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) |
| |
| /* stack */ |
| #define CFG_INIT_SP_OFFSET CFG_MONITOR_BASE |
| |
| /*#define RAMENV */ |
| #define FLASH |
| |
| #ifdef FLASH |
| #define CFG_FLASH_BASE XILINX_FLASH_START |
| #define CFG_FLASH_SIZE XILINX_FLASH_SIZE |
| #define CFG_FLASH_CFI 1 |
| #define CONFIG_FLASH_CFI_DRIVER 1 |
| #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
| #define CFG_FLASH_PROTECTION /* hardware flash protection */ |
| |
| #ifdef RAMENV |
| #define CONFIG_ENV_IS_NOWHERE 1 |
| #define CONFIG_ENV_SIZE 0x1000 |
| #define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - CONFIG_ENV_SIZE) |
| |
| #else /* !RAMENV */ |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ |
| #define CONFIG_ENV_ADDR (CFG_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) |
| #define CONFIG_ENV_SIZE 0x40000 |
| #endif /* !RAMBOOT */ |
| #else /* !FLASH */ |
| /* ENV in RAM */ |
| #define CFG_NO_FLASH 1 |
| #define CONFIG_ENV_IS_NOWHERE 1 |
| #define CONFIG_ENV_SIZE 0x1000 |
| #define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - CONFIG_ENV_SIZE) |
| #define CFG_FLASH_PROTECTION /* hardware flash protection */ |
| #endif /* !FLASH */ |
| |
| /* system ace */ |
| #ifdef XILINX_SYSACE_BASEADDR |
| #define CONFIG_SYSTEMACE |
| /* #define DEBUG_SYSTEMACE */ |
| #define SYSTEMACE_CONFIG_FPGA |
| #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR |
| #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH |
| #define CONFIG_DOS_PARTITION |
| #endif |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_IRQ |
| #define CONFIG_CMD_MFSL |
| |
| #ifndef CFG_ENET |
| #undef CONFIG_CMD_NET |
| #else |
| #define CONFIG_CMD_PING |
| #endif |
| |
| #if defined(CONFIG_SYSTEMACE) |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| #endif |
| |
| #if defined(FLASH) |
| #define CONFIG_CMD_ECHO |
| #define CONFIG_CMD_FLASH |
| #define CONFIG_CMD_IMLS |
| #define CONFIG_CMD_JFFS2 |
| |
| #if !defined(RAMENV) |
| #define CONFIG_CMD_ENV |
| #define CONFIG_CMD_SAVES |
| #endif |
| #else |
| #undef CONFIG_CMD_FLASH |
| #endif |
| |
| #if defined(CONFIG_CMD_JFFS2) |
| /* JFFS2 partitions */ |
| #define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ |
| #define MTDIDS_DEFAULT "nor0=ml401-0" |
| |
| /* default mtd partition table */ |
| #define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ |
| "256k(env),3m(kernel),1m(romfs),"\ |
| "1m(cramfs),-(jffs2)" |
| #endif |
| |
| /* Miscellaneous configurable options */ |
| #define CFG_PROMPT "U-Boot-mONStR> " |
| #define CFG_CBSIZE 512 /* size of console buffer */ |
| #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ |
| #define CFG_MAXARGS 15 /* max number of command args */ |
| #define CFG_LONGHELP |
| #define CFG_LOAD_ADDR 0x12000000 /* default load address */ |
| |
| #define CONFIG_BOOTDELAY 30 |
| #define CONFIG_BOOTARGS "root=romfs" |
| #define CONFIG_HOSTNAME "ml401" |
| #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" |
| #define CONFIG_IPADDR 192.168.0.3 |
| #define CONFIG_SERVERIP 192.168.0.5 |
| #define CONFIG_GATEWAYIP 192.168.0.1 |
| #define CONFIG_ETHADDR 00:E0:0C:00:00:FD |
| |
| /* architecture dependent code */ |
| #define CFG_USR_EXCEP /* user exception */ |
| #define CFG_HZ 1000 |
| |
| #define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ |
| "nor0=ml401-0\0"\ |
| "mtdparts=mtdparts=ml401-0:"\ |
| "256k(u-boot),256k(env),3m(kernel),"\ |
| "1m(romfs),1m(cramfs),-(jffs2)\0" |
| |
| #define CONFIG_CMDLINE_EDITING |
| #define CONFIG_OF_LIBFDT 1 |
| |
| #endif /* __CONFIG_H */ |