include/configs/cmi_mpc5xx.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2003
  * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation,
  */

 /*
  * File:		cmi_mpc5xx.h
  *
  * Discription:		Config header file for cmi
  *			board  using an MPC5xx CPU
  *
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  */

 #define CONFIG_MPC555		1		/* This is an MPC555 CPU		*/
 #define CONFIG_CMI		1		/* Using the customized cmi board	*/

 /* Serial Console Configuration */
 #define	CONFIG_5xx_CONS_SCI1
 #undef	CONFIG_5xx_CONS_SCI2

 #define CONFIG_BAUDRATE		57600


 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME


 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #undef	CONFIG_CMD_NET		/* disabeled - causes compile errors */

 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_LOADB
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_LOADS
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_CONSOLE
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_RUN
 #define CONFIG_CMD_IMI


 #if 0
 #define CONFIG_BOOTDELAY	-1		/* autoboot disabled			*/
 #else
 #define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds		*/
 #endif
 #define CONFIG_BOOTCOMMAND	"go 02034004"	/* autoboot command			*/

 #define CONFIG_BOOTARGS		""		/* Assuming OS Image in 4 flash sector at offset 4004 */

 #define CONFIG_WATCHDOG				/* turn on platform specific watchdog	*/

 #define CONFIG_STATUS_LED	1		/* Enable status led */

 #define CONFIG_LOADS_ECHO	1		/* Echo on for serial download */

 /*
  * Miscellaneous configurable options
  */

 #define	CFG_LONGHELP				/* undef to save memory		*/
 #define	CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
 #endif
 #define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define	CFG_MAXARGS		16	       /* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x00000000	/* memtest works on		*/
 #define CFG_MEMTEST_END		0x000fa000	/* 1 MB in SRAM			*/

 #define	CFG_LOAD_ADDR		0x100000	/* default load address		*/

 #define	CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }


 /*
  * Low Level Configuration Settings
  */

 /*
  * Internal Memory Mapped (This is not the IMMR content)
  */
 #define CFG_IMMR		0x01000000		/* Physical start adress of internal memory map */

 /*
  * Definitions for initial stack pointer and data area
  */
 #define CFG_INIT_RAM_ADDR	(CFG_IMMR + 0x003f9800)	/* Physical start adress of internal MPC555 writable RAM */
 #define	CFG_INIT_RAM_END	(CFG_IMMR + 0x003fffff)	/* Physical end adress of internal MPC555 used RAM area	*/
 #define	CFG_GBL_DATA_SIZE	64			/* Size in bytes reserved for initial global data */
 #define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
 #define	CFG_INIT_SP_ADDR	0x013fa000		/* Physical start adress of inital stack */

 /*
  * Start addresses for the final memory configuration
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define	CFG_SDRAM_BASE		0x00000000	/* Monitor won't change memory map			*/
 #define CFG_FLASH_BASE		0x02000000	/* External flash */
 #define PLD_BASE		0x03000000	/* PLD  */
 #define ANYBUS_BASE		0x03010000	/* Anybus Module */

 #define CFG_RESET_ADRESS	0x01000000	/* Adress which causes reset */
 #define	CFG_MONITOR_BASE	CFG_FLASH_BASE	/* TEXT_BASE is defined in the board config.mk file.	*/
 						/* This adress is given to the linker with -Ttext to	*/
 						/* locate the text section at this adress.		*/
 #define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor				*/
 #define	CFG_MALLOC_LEN		(64 << 10)	/* Reserve 128 kB for malloc()				*/

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/


 /*-----------------------------------------------------------------------
  * FLASH organization
  *-----------------------------------------------------------------------
  *
  */

 #define CFG_MAX_FLASH_BANKS	1		/* Max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	64		/* Max number of sectors on one chip	*/
 #define CFG_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms)	*/
 #define CFG_FLASH_PROTECTION    1		/* Physically section protection on	*/

 #define	CONFIG_ENV_IS_IN_FLASH	1

 #ifdef	CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OFFSET		0x00020000	/* Environment starts at this adress	*/
 #define	CONFIG_ENV_SIZE		0x00010000	/* Set whole sector as env		*/
 #define	CFG_USE_PPCENV				/* Environment embedded in sect .ppcenv */
 #endif

 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control
  * SYPCR can only be written once after reset!
  *-----------------------------------------------------------------------
  * SW Watchdog freeze
  */
 #if defined(CONFIG_WATCHDOG)
 #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
 #else
 #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 			 SYPCR_SWP)
 #endif	/* CONFIG_WATCHDOG */

 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
 #define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
 #define CFG_PISCR	(PISCR_PITF)

 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register
  *-----------------------------------------------------------------------
  * Set clock output, timebase and RTC source and divider,
  * power management and some other internal clocks
  */
 #define SCCR_MASK	SCCR_EBDF00
 #define CFG_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
 			 SCCR_COM00   | SCCR_DFNL000 | SCCR_DFNH000)

 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration
  *-----------------------------------------------------------------------
  * Data show cycle
  */
 #define CFG_SIUMCR	(SIUMCR_DBGC00)		/* Disable data show cycle	*/

 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register
  *-----------------------------------------------------------------------
  * Set all bits to 40 Mhz
  *
  */
 #define CFG_OSC_CLK	((uint)4000000)		/* Oscillator clock is 4MHz	*/
 #define CFG_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)


 /*-----------------------------------------------------------------------
  * UMCR - UIMB Module Configuration Register
  *-----------------------------------------------------------------------
  *
  */
 #define CFG_UMCR	(UMCR_FSPEED)		/* IMB clock same as U-bus	*/

 /*-----------------------------------------------------------------------
  * ICTRL - I-Bus Support Control Register
  */
 #define CFG_ICTRL	(ICTRL_ISCT_SER_7)	/* Take out of serialized mode	*/

 /*-----------------------------------------------------------------------
  * USIU - Memory Controller Register
  *-----------------------------------------------------------------------
  */

 #define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16)
 #define CFG_OR0_PRELIM		(OR_ADDR_MK_FF | OR_SCY_3)
 #define CFG_BR1_PRELIM		(ANYBUS_BASE)
 #define CFG_OR1_PRELIM		(OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR)
 #define CFG_BR2_PRELIM		(CFG_SDRAM_BASE | BR_V | BR_PS_32)
 #define CFG_OR2_PRELIM		(OR_ADDR_MK_FF)
 #define CFG_BR3_PRELIM		(PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8)
 #define CFG_OR3_PRELIM		(OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \
 				 OR_ACS_10 | OR_ETHR | OR_CSNT)

 #define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* We don't realign the flash	*/

 /*-----------------------------------------------------------------------
  * DER - Timer Decrementer
  *-----------------------------------------------------------------------
  * Initialise to zero
  */
 #define CFG_DER			0x00000000


 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define	BOOTFLAG_COLD	0x01			/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02			/* Software reboot			*/

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2003
	* Martin Winistoerfer, martinwinistoerfer@gmx.ch.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation,
	*/

	/*
	* File: cmi_mpc5xx.h
	*
	* Discription: Config header file for cmi
	* board using an MPC5xx CPU
	*
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	*/

	#define CONFIG_MPC555 1 /* This is an MPC555 CPU */
	#define CONFIG_CMI 1 /* Using the customized cmi board */

	/* Serial Console Configuration */
	#define CONFIG_5xx_CONS_SCI1
	#undef CONFIG_5xx_CONS_SCI2

	#define CONFIG_BAUDRATE 57600


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#undef CONFIG_CMD_NET /* disabeled - causes compile errors */

	#define CONFIG_CMD_MEMORY
	#define CONFIG_CMD_LOADB
	#define CONFIG_CMD_REGINFO
	#define CONFIG_CMD_FLASH
	#define CONFIG_CMD_LOADS
	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_BDI
	#define CONFIG_CMD_CONSOLE
	#define CONFIG_CMD_ENV
	#define CONFIG_CMD_RUN
	#define CONFIG_CMD_IMI


	#if 0
	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	#else
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#endif
	#define CONFIG_BOOTCOMMAND "go 02034004" /* autoboot command */

	#define CONFIG_BOOTARGS "" /* Assuming OS Image in 4 flash sector at offset 4004 */

	#define CONFIG_WATCHDOG /* turn on platform specific watchdog */

	#define CONFIG_STATUS_LED 1 /* Enable status led */

	#define CONFIG_LOADS_ECHO 1 /* Echo on for serial download */

	/*
	* Miscellaneous configurable options
	*/

	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#if defined(CONFIG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00000000 /* memtest works on */
	#define CFG_MEMTEST_END 0x000fa000 /* 1 MB in SRAM */

	#define CFG_LOAD_ADDR 0x100000 /* default load address */

	#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 }


	/*
	* Low Level Configuration Settings
	*/

	/*
	* Internal Memory Mapped (This is not the IMMR content)
	*/
	#define CFG_IMMR 0x01000000 /* Physical start adress of internal memory map */

	/*
	* Definitions for initial stack pointer and data area
	*/
	#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */
	#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */
	#define CFG_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */
	#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
	#define CFG_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */

	/*
	* Start addresses for the final memory configuration
	* Please note that CFG_SDRAM_BASE _must_ start at 0
	*/
	#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */
	#define CFG_FLASH_BASE 0x02000000 /* External flash */
	#define PLD_BASE 0x03000000 /* PLD */
	#define ANYBUS_BASE 0x03010000 /* Anybus Module */

	#define CFG_RESET_ADRESS 0x01000000 /* Adress which causes reset */
	#define CFG_MONITOR_BASE CFG_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */
	/* This adress is given to the linker with -Ttext to */
	/* locate the text section at this adress. */
	#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	#define CFG_MALLOC_LEN (64 << 10) /* Reserve 128 kB for malloc() */

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */


	/*-----------------------------------------------------------------------
	* FLASH organization
	*-----------------------------------------------------------------------
	*
	*/

	#define CFG_MAX_FLASH_BANKS 1 /* Max number of memory banks */
	#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors on one chip */
	#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */
	#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */
	#define CFG_FLASH_PROTECTION 1 /* Physically section protection on */

	#define CONFIG_ENV_IS_IN_FLASH 1

	#ifdef CONFIG_ENV_IS_IN_FLASH
	#define CONFIG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */
	#define CONFIG_ENV_SIZE 0x00010000 /* Set whole sector as env */
	#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
	#endif

	/*-----------------------------------------------------------------------
	* SYPCR - System Protection Control
	* SYPCR can only be written once after reset!
	*-----------------------------------------------------------------------
	* SW Watchdog freeze
	*/
	#if defined(CONFIG_WATCHDOG)
	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	#else
	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	SYPCR_SWP)
	#endif /* CONFIG_WATCHDOG */

	/*-----------------------------------------------------------------------
	* TBSCR - Time Base Status and Control
	*-----------------------------------------------------------------------
	* Clear Reference Interrupt Status, Timebase freezing enabled
	*/
	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	*/
	#define CFG_PISCR (PISCR_PITF)

	/*-----------------------------------------------------------------------
	* SCCR - System Clock and reset Control Register
	*-----------------------------------------------------------------------
	* Set clock output, timebase and RTC source and divider,
	* power management and some other internal clocks
	*/
	#define SCCR_MASK SCCR_EBDF00
	#define CFG_SCCR (SCCR_TBS \| SCCR_RTDIV \| SCCR_RTSEL \| \
	SCCR_COM00 \| SCCR_DFNL000 \| SCCR_DFNH000)

	/*-----------------------------------------------------------------------
	* SIUMCR - SIU Module Configuration
	*-----------------------------------------------------------------------
	* Data show cycle
	*/
	#define CFG_SIUMCR (SIUMCR_DBGC00) /* Disable data show cycle */

	/*-----------------------------------------------------------------------
	* PLPRCR - PLL, Low-Power, and Reset Control Register
	*-----------------------------------------------------------------------
	* Set all bits to 40 Mhz
	*
	*/
	#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */
	#define CFG_PLPRCR (PLPRCR_MF_9 \| PLPRCR_DIVF_0)


	/*-----------------------------------------------------------------------
	* UMCR - UIMB Module Configuration Register
	*-----------------------------------------------------------------------
	*
	*/
	#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */

	/*-----------------------------------------------------------------------
	* ICTRL - I-Bus Support Control Register
	*/
	#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */

	/*-----------------------------------------------------------------------
	* USIU - Memory Controller Register
	*-----------------------------------------------------------------------
	*/

	#define CFG_BR0_PRELIM (CFG_FLASH_BASE \| BR_V \| BR_BI \| BR_PS_16)
	#define CFG_OR0_PRELIM (OR_ADDR_MK_FF \| OR_SCY_3)
	#define CFG_BR1_PRELIM (ANYBUS_BASE)
	#define CFG_OR1_PRELIM (OR_ADDR_MK_FFFF \| OR_SCY_1 \| OR_ETHR)
	#define CFG_BR2_PRELIM (CFG_SDRAM_BASE \| BR_V \| BR_PS_32)
	#define CFG_OR2_PRELIM (OR_ADDR_MK_FF)
	#define CFG_BR3_PRELIM (PLD_BASE \| BR_V \| BR_BI \| BR_LBDIR \| BR_PS_8)
	#define CFG_OR3_PRELIM (OR_ADDR_MK_FF \| OR_TRLX \| OR_BSCY \| OR_SCY_8 \| \
	OR_ACS_10 \| OR_ETHR \| OR_CSNT)

	#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* We don't realign the flash */

	/*-----------------------------------------------------------------------
	* DER - Timer Decrementer
	*-----------------------------------------------------------------------
	* Initialise to zero
	*/
	#define CFG_DER 0x00000000


	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#endif /* __CONFIG_H */