blob: 5246bc8c4fb88fd9983882d7c4a9455539f147b2 [file] [log] [blame]
/*
* (C) Copyright 2009
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/gpio.h>
enum {
HWTYPE_DLVISION_CPU = 0,
HWTYPE_DLVISION_CON = 1,
};
#define HWREV_100 6
int board_early_init_f(void)
{
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
mtdcr(uictr, 0x10000000); /* set int trigger levels */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks
* -> ca. 15 us
*/
mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
/*
* setup io-latches
*/
out_le16((void *)CONFIG_SYS_LATCH_BASE, 0x00f0);
out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0x0002);
out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x200), 0x0000);
return 0;
}
int misc_init_r(void)
{
/*
* set "startup-finished"-gpios
*/
gpio_write_bit(21, 0);
gpio_write_bit(22, 1);
return 0;
}
/*
* Check Board Identity:
*/
int checkboard(void)
{
char *s = getenv("serial#");
u8 channel2_msr = in_8((void *)CONFIG_UART_BASE + 0x26);
u8 channel3_msr = in_8((void *)CONFIG_UART_BASE + 0x36);
u8 channel7_msr = in_8((void *)CONFIG_UART_BASE + 0x76);
u8 unit_type;
u8 local_con;
u8 audio;
u8 hardware_version;
printf("Board: ");
unit_type = (channel2_msr & 0x80) ? 0x01 : 0x00;
local_con = (channel2_msr & 0x20) ? 0x01 : 0x00;
audio = (channel3_msr & 0x20) ? 0x01 : 0x00;
hardware_version =
((channel7_msr & 0x20) ? 0x01 : 0x00)
| ((channel7_msr & 0x80) ? 0x02 : 0x00)
| ((channel7_msr & 0x40) ? 0x04 : 0x00);
switch (unit_type) {
case HWTYPE_DLVISION_CON:
printf("DL-Vision-CON");
break;
case HWTYPE_DLVISION_CPU:
printf("DL-Vision-CPU");
break;
default:
printf("UnitType %d, unsupported", unit_type);
break;
}
if (s != NULL) {
puts(", serial# ");
puts(s);
}
puts("\n ");
switch (hardware_version) {
case HWREV_100:
printf("HW-Ver 1.00");
break;
default:
printf("HW-Ver %d, unsupported",
hardware_version);
break;
}
if (local_con)
printf(", local console");
if (audio)
printf(", audio support");
puts("\n");
return 0;
}