arch/arm/mach-kirkwood/cpu.c - github/trini/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  */

 #include <common.h>
 #include <command.h>
 #include <cpu_func.h>
 #include <env.h>
 #include <init.h>
 #include <log.h>
 #include <net.h>
 #include <netdev.h>
 #include <asm/cache.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 #include <mvebu_mmc.h>

 void reset_cpu(void)
 {
 	struct kwcpu_registers *cpureg =
 	    (struct kwcpu_registers *)KW_CPU_REG_BASE;

 	writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
 		&cpureg->rstoutn_mask);
 	writel(readl(&cpureg->sys_soft_rst) | 1,
 		&cpureg->sys_soft_rst);
 	while (1) ;
 }

 /*
  * Window Size
  * Used with the Base register to set the address window size and location.
  * Must be programmed from LSB to MSB as sequence of ones followed by
  * sequence of zeros. The number of ones specifies the size of the window in
  * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
  * NOTE: A value of 0x0 specifies 64-KByte size.
  */
 unsigned int kw_winctrl_calcsize(unsigned int sizeval)
 {
 	int i;
 	unsigned int j = 0;
 	u32 val = sizeval >> 1;

 	for (i = 0; val >= 0x10000; i++) {
 		j |= (1 << i);
 		val = val >> 1;
 	}
 	return (0x0000ffff & j);
 }

 static struct mbus_win windows[] = {
 	/* Window 0: PCIE MEM address space */
 	{ KW_DEFADR_PCI_MEM, 1024 * 1024 * 256,
 	  KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_MEM },

 	/* Window 1: PCIE IO address space */
 	{ KW_DEFADR_PCI_IO, 1024 * 64,
 	  KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_IO },

 	/* Window 2: NAND Flash address space */
 	{ KW_DEFADR_NANDF, 1024 * 1024 * 128,
 	  KWCPU_TARGET_MEMORY, KWCPU_ATTR_NANDFLASH },

 	/* Window 3: SPI Flash address space */
 	{ KW_DEFADR_SPIF, 1024 * 1024 * 128,
 	  KWCPU_TARGET_MEMORY, KWCPU_ATTR_SPIFLASH },

 	/* Window 4: BOOT Memory address space */
 	{ KW_DEFADR_BOOTROM, 1024 * 1024 * 128,
 	  KWCPU_TARGET_MEMORY, KWCPU_ATTR_BOOTROM },

 	/* Window 5: Security SRAM address space */
 	{ KW_DEFADR_SASRAM, 1024 * 64,
 	  KWCPU_TARGET_SASRAM, KWCPU_ATTR_SASRAM },
 };

 /*
  * SYSRSTn Duration Counter Support
  *
  * Kirkwood SoC implements a hardware-based SYSRSTn duration counter.
  * When SYSRSTn is asserted low, a SYSRSTn duration counter is running.
  * The SYSRSTn duration counter is useful for implementing a manufacturer
  * or factory reset. Upon a long reset assertion that is greater than a
  * pre-configured environment variable value for sysrstdelay,
  * The counter value is stored in the SYSRSTn Length Counter Register
  * The counter is based on the 25-MHz reference clock (40ns)
  * It is a 29-bit counter, yielding a maximum counting duration of
  * 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value,
  * it remains at this value until counter reset is triggered by setting
  * bit 31 of KW_REG_SYSRST_CNT
  */
 static void kw_sysrst_action(void)
 {
 	int ret;
 	char *s = env_get("sysrstcmd");

 	if (!s) {
 		debug("Error.. %s failed, check sysrstcmd\n",
 			__FUNCTION__);
 		return;
 	}

 	debug("Starting %s process...\n", __FUNCTION__);
 	ret = run_command(s, 0);
 	if (ret != 0)
 		debug("Error.. %s failed\n", __FUNCTION__);
 	else
 		debug("%s process finished\n", __FUNCTION__);
 }

 static void kw_sysrst_check(void)
 {
 	u32 sysrst_cnt, sysrst_dly;
 	char *s;

 	/*
 	 * no action if sysrstdelay environment variable is not defined
 	 */
 	s = env_get("sysrstdelay");
 	if (s == NULL)
 		return;

 	/* read sysrstdelay value */
 	sysrst_dly = (u32)dectoul(s, NULL);

 	/* read SysRst Length counter register (bits 28:0) */
 	sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT));
 	debug("H/w Rst hold time: %d.%d secs\n",
 		sysrst_cnt / SYSRST_CNT_1SEC_VAL,
 		sysrst_cnt % SYSRST_CNT_1SEC_VAL);

 	/* clear the counter for next valid read*/
 	writel(1 << 31, KW_REG_SYSRST_CNT);

 	/*
 	 * sysrst_action:
 	 * if H/w Reset key is pressed and hold for time
 	 * more than sysrst_dly in seconds
 	 */
 	if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly)
 		kw_sysrst_action();
 }

 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
 	char *rev = "??";
 	u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
 	u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;

 	if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) {
 		printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid);
 		return -1;
 	}

 	switch (revid) {
 	case 0:
 		if (devid == 0x6281)
 			rev = "Z0";
 		else if (devid == 0x6282)
 			rev = "A0";
 		break;
 	case 1:
 		rev = "A1";
 		break;
 	case 2:
 		rev = "A0";
 		break;
 	case 3:
 		rev = "A1";
 		break;
 	default:
 		break;
 	}

 	printf("SoC:   Kirkwood 88F%04x_%s\n", devid, rev);
 	return 0;
 }
 #endif /* CONFIG_DISPLAY_CPUINFO */

 #ifdef CONFIG_ARCH_CPU_INIT
 int arch_cpu_init(void)
 {
 	u32 reg;
 	struct kwcpu_registers *cpureg =
 		(struct kwcpu_registers *)KW_CPU_REG_BASE;

 	/* Linux expects the internal registers to be at 0xf1000000 */
 	writel(KW_REGS_PHY_BASE, KW_OFFSET_REG);

 	/* Enable and invalidate L2 cache in write through mode */
 	writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg);
 	invalidate_l2_cache();

 #ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
 	/*
 	 * Configures the I/O voltage of the pads connected to Egigabit
 	 * Ethernet interface to 1.8V
 	 * By default it is set to 3.3V
 	 */
 	reg = readl(KW_REG_MPP_OUT_DRV_REG);
 	reg |= (1 << 7);
 	writel(reg, KW_REG_MPP_OUT_DRV_REG);
 #endif
 #ifdef CONFIG_KIRKWOOD_EGIGA_INIT
 	/*
 	 * Set egiga port0/1 in normal functional mode
 	 * This is required becasue on kirkwood by default ports are in reset mode
 	 * OS egiga driver may not have provision to set them in normal mode
 	 * and if u-boot is build without network support, network may fail at OS level
 	 */
 	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0));
 	reg &= ~(1 << 4);	/* Clear PortReset Bit */
 	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0)));
 	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1));
 	reg &= ~(1 << 4);	/* Clear PortReset Bit */
 	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1)));
 #endif
 #ifdef CONFIG_KIRKWOOD_PCIE_INIT
 	/*
 	 * Enable PCI Express Port0
 	 */
 	reg = readl(&cpureg->ctrl_stat);
 	reg |= (1 << 0);	/* Set PEX0En Bit */
 	writel(reg, &cpureg->ctrl_stat);
 #endif
 	return 0;
 }
 #endif /* CONFIG_ARCH_CPU_INIT */

 /*
  * SOC specific misc init
  */
 #if defined(CONFIG_ARCH_MISC_INIT)
 int arch_misc_init(void)
 {
 	volatile u32 temp;

 	/*CPU streaming & write allocate */
 	temp = readfr_extra_feature_reg();
 	temp &= ~(1 << 28);	/* disable wr alloc */
 	writefr_extra_feature_reg(temp);

 	temp = readfr_extra_feature_reg();
 	temp &= ~(1 << 29);	/* streaming disabled */
 	writefr_extra_feature_reg(temp);

 	/* L2Cache settings */
 	temp = readfr_extra_feature_reg();
 	/* Disable L2C pre fetch - Set bit 24 */
 	temp |= (1 << 24);
 	/* enable L2C - Set bit 22 */
 	temp |= (1 << 22);
 	writefr_extra_feature_reg(temp);

 	/* Change reset vector to address 0x0 */
 	temp = get_cr();
 	set_cr(temp & ~CR_V);

 	/* Configure mbus windows */
 	mvebu_mbus_probe(windows, ARRAY_SIZE(windows));

 	/* checks and execute resset to factory event */
 	kw_sysrst_check();

 	return 0;
 }
 #endif /* CONFIG_ARCH_MISC_INIT */

 #ifdef CONFIG_MVGBE
 int cpu_eth_init(struct bd_info *bis)
 {
 	mvgbe_initialize(bis);
 	return 0;
 }
 #endif
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2009
	* Marvell Semiconductor <www.marvell.com>
	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	*/

	#include <common.h>
	#include <command.h>
	#include <cpu_func.h>
	#include <env.h>
	#include <init.h>
	#include <log.h>
	#include <net.h>
	#include <netdev.h>
	#include <asm/cache.h>
	#include <asm/io.h>
	#include <asm/arch/cpu.h>
	#include <asm/arch/soc.h>
	#include <mvebu_mmc.h>

	void reset_cpu(void)
	{
	struct kwcpu_registers *cpureg =
	(struct kwcpu_registers *)KW_CPU_REG_BASE;

	writel(readl(&cpureg->rstoutn_mask) \| (1 << 2),
	&cpureg->rstoutn_mask);
	writel(readl(&cpureg->sys_soft_rst) \| 1,
	&cpureg->sys_soft_rst);
	while (1) ;
	}

	/*
	* Window Size
	* Used with the Base register to set the address window size and location.
	* Must be programmed from LSB to MSB as sequence of ones followed by
	* sequence of zeros. The number of ones specifies the size of the window in
	* 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
	* NOTE: A value of 0x0 specifies 64-KByte size.
	*/
	unsigned int kw_winctrl_calcsize(unsigned int sizeval)
	{
	int i;
	unsigned int j = 0;
	u32 val = sizeval >> 1;

	for (i = 0; val >= 0x10000; i++) {
	j \|= (1 << i);
	val = val >> 1;
	}
	return (0x0000ffff & j);
	}

	static struct mbus_win windows[] = {
	/* Window 0: PCIE MEM address space */
	{ KW_DEFADR_PCI_MEM, 1024 * 1024 * 256,
	KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_MEM },

	/* Window 1: PCIE IO address space */
	{ KW_DEFADR_PCI_IO, 1024 * 64,
	KWCPU_TARGET_PCIE, KWCPU_ATTR_PCIE_IO },

	/* Window 2: NAND Flash address space */
	{ KW_DEFADR_NANDF, 1024 * 1024 * 128,
	KWCPU_TARGET_MEMORY, KWCPU_ATTR_NANDFLASH },

	/* Window 3: SPI Flash address space */
	{ KW_DEFADR_SPIF, 1024 * 1024 * 128,
	KWCPU_TARGET_MEMORY, KWCPU_ATTR_SPIFLASH },

	/* Window 4: BOOT Memory address space */
	{ KW_DEFADR_BOOTROM, 1024 * 1024 * 128,
	KWCPU_TARGET_MEMORY, KWCPU_ATTR_BOOTROM },

	/* Window 5: Security SRAM address space */
	{ KW_DEFADR_SASRAM, 1024 * 64,
	KWCPU_TARGET_SASRAM, KWCPU_ATTR_SASRAM },
	};

	/*
	* SYSRSTn Duration Counter Support
	*
	* Kirkwood SoC implements a hardware-based SYSRSTn duration counter.
	* When SYSRSTn is asserted low, a SYSRSTn duration counter is running.
	* The SYSRSTn duration counter is useful for implementing a manufacturer
	* or factory reset. Upon a long reset assertion that is greater than a
	* pre-configured environment variable value for sysrstdelay,
	* The counter value is stored in the SYSRSTn Length Counter Register
	* The counter is based on the 25-MHz reference clock (40ns)
	* It is a 29-bit counter, yielding a maximum counting duration of
	* 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value,
	* it remains at this value until counter reset is triggered by setting
	* bit 31 of KW_REG_SYSRST_CNT
	*/
	static void kw_sysrst_action(void)
	{
	int ret;
	char *s = env_get("sysrstcmd");

	if (!s) {
	debug("Error.. %s failed, check sysrstcmd\n",
	__FUNCTION__);
	return;
	}

	debug("Starting %s process...\n", __FUNCTION__);
	ret = run_command(s, 0);
	if (ret != 0)
	debug("Error.. %s failed\n", __FUNCTION__);
	else
	debug("%s process finished\n", __FUNCTION__);
	}

	static void kw_sysrst_check(void)
	{
	u32 sysrst_cnt, sysrst_dly;
	char *s;

	/*
	* no action if sysrstdelay environment variable is not defined
	*/
	s = env_get("sysrstdelay");
	if (s == NULL)
	return;

	/* read sysrstdelay value */
	sysrst_dly = (u32)dectoul(s, NULL);

	/* read SysRst Length counter register (bits 28:0) */
	sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT));
	debug("H/w Rst hold time: %d.%d secs\n",
	sysrst_cnt / SYSRST_CNT_1SEC_VAL,
	sysrst_cnt % SYSRST_CNT_1SEC_VAL);

	/* clear the counter for next valid read*/
	writel(1 << 31, KW_REG_SYSRST_CNT);

	/*
	* sysrst_action:
	* if H/w Reset key is pressed and hold for time
	* more than sysrst_dly in seconds
	*/
	if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly)
	kw_sysrst_action();
	}

	#if defined(CONFIG_DISPLAY_CPUINFO)
	int print_cpuinfo(void)
	{
	char *rev = "??";
	u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
	u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;

	if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) {
	printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid);
	return -1;
	}

	switch (revid) {
	case 0:
	if (devid == 0x6281)
	rev = "Z0";
	else if (devid == 0x6282)
	rev = "A0";
	break;
	case 1:
	rev = "A1";
	break;
	case 2:
	rev = "A0";
	break;
	case 3:
	rev = "A1";
	break;
	default:
	break;
	}

	printf("SoC: Kirkwood 88F%04x_%s\n", devid, rev);
	return 0;
	}
	#endif /* CONFIG_DISPLAY_CPUINFO */

	#ifdef CONFIG_ARCH_CPU_INIT
	int arch_cpu_init(void)
	{
	u32 reg;
	struct kwcpu_registers *cpureg =
	(struct kwcpu_registers *)KW_CPU_REG_BASE;

	/* Linux expects the internal registers to be at 0xf1000000 */
	writel(KW_REGS_PHY_BASE, KW_OFFSET_REG);

	/* Enable and invalidate L2 cache in write through mode */
	writel(readl(&cpureg->l2_cfg) \| 0x18, &cpureg->l2_cfg);
	invalidate_l2_cache();

	#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
	/*
	* Configures the I/O voltage of the pads connected to Egigabit
	* Ethernet interface to 1.8V
	* By default it is set to 3.3V
	*/
	reg = readl(KW_REG_MPP_OUT_DRV_REG);
	reg \|= (1 << 7);
	writel(reg, KW_REG_MPP_OUT_DRV_REG);
	#endif
	#ifdef CONFIG_KIRKWOOD_EGIGA_INIT
	/*
	* Set egiga port0/1 in normal functional mode
	* This is required becasue on kirkwood by default ports are in reset mode
	* OS egiga driver may not have provision to set them in normal mode
	* and if u-boot is build without network support, network may fail at OS level
	*/
	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0));
	reg &= ~(1 << 4); /* Clear PortReset Bit */
	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0)));
	reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1));
	reg &= ~(1 << 4); /* Clear PortReset Bit */
	writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1)));
	#endif
	#ifdef CONFIG_KIRKWOOD_PCIE_INIT
	/*
	* Enable PCI Express Port0
	*/
	reg = readl(&cpureg->ctrl_stat);
	reg \|= (1 << 0); /* Set PEX0En Bit */
	writel(reg, &cpureg->ctrl_stat);
	#endif
	return 0;
	}
	#endif /* CONFIG_ARCH_CPU_INIT */

	/*
	* SOC specific misc init
	*/
	#if defined(CONFIG_ARCH_MISC_INIT)
	int arch_misc_init(void)
	{
	volatile u32 temp;

	/CPU streaming & write allocate /
	temp = readfr_extra_feature_reg();
	temp &= ~(1 << 28); /* disable wr alloc */
	writefr_extra_feature_reg(temp);

	temp = readfr_extra_feature_reg();
	temp &= ~(1 << 29); /* streaming disabled */
	writefr_extra_feature_reg(temp);

	/* L2Cache settings */
	temp = readfr_extra_feature_reg();
	/* Disable L2C pre fetch - Set bit 24 */
	temp \|= (1 << 24);
	/* enable L2C - Set bit 22 */
	temp \|= (1 << 22);
	writefr_extra_feature_reg(temp);

	/* Change reset vector to address 0x0 */
	temp = get_cr();
	set_cr(temp & ~CR_V);

	/* Configure mbus windows */
	mvebu_mbus_probe(windows, ARRAY_SIZE(windows));

	/* checks and execute resset to factory event */
	kw_sysrst_check();

	return 0;
	}
	#endif /* CONFIG_ARCH_MISC_INIT */

	#ifdef CONFIG_MVGBE
	int cpu_eth_init(struct bd_info *bis)
	{
	mvgbe_initialize(bis);
	return 0;
	}
	#endif