ARM: AM33xx: Cleanup clocks layer
Cleaning up the clocks layer.
This helps in addition of new Soc with minimal
changes.
This is derived from OMAP4 boards.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index f1623db..64a3af7 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -56,12 +56,6 @@
}
#endif
-void setup_clocks_for_console(void)
-{
- /* Not yet implemented */
- return;
-}
-
/* AM33XX has two MUSB controllers which can be host or gadget */
#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 15f4a2c..8e5f3c6 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -98,7 +98,7 @@
wait_for_lock(dpll_regs);
}
-void setup_dplls(void)
+static void setup_dplls(void)
{
const struct dpll_params *params;
do_setup_dpll(&dpll_core_regs, &dpll_core);
@@ -109,3 +109,63 @@
params = get_dpll_ddr_params();
do_setup_dpll(&dpll_ddr_regs, params);
}
+
+static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+{
+ u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+ u32 bound = LDELAY;
+
+ while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+ (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+ clkctrl = readl(clkctrl_addr);
+ idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+ MODULE_CLKCTRL_IDLEST_SHIFT;
+ if (--bound == 0) {
+ printf("Clock enable failed for 0x%p idlest 0x%x\n",
+ clkctrl_addr, clkctrl);
+ return;
+ }
+ }
+}
+
+static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+ u32 wait_for_enable)
+{
+ clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+ enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ debug("Enable clock module - %p\n", clkctrl_addr);
+ if (wait_for_enable)
+ wait_for_clk_enable(clkctrl_addr);
+}
+
+static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+{
+ clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+ enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
+ debug("Enable clock domain - %p\n", clkctrl_reg);
+}
+
+void do_enable_clocks(u32 *const *clk_domains,
+ u32 *const *clk_modules_explicit_en, u8 wait_for_enable)
+{
+ u32 i, max = 100;
+
+ /* Put the clock domains in SW_WKUP mode */
+ for (i = 0; (i < max) && clk_domains[i]; i++) {
+ enable_clock_domain(clk_domains[i],
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ }
+
+ /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+ for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) {
+ enable_clock_module(clk_modules_explicit_en[i],
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+ wait_for_enable);
+ };
+}
+
+void prcm_init()
+{
+ enable_basic_clocks();
+ setup_dplls();
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index d5d47ad..e5f287b 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -14,17 +14,12 @@
#include <asm/arch/hardware.h>
#include <asm/io.h>
-#define PRCM_MOD_EN 0x2
-#define PRCM_FORCE_WAKEUP 0x2
-#define PRCM_FUNCTL 0x0
-
-#define CPGMAC0_IDLE 0x30000
#define OSC (V_OSCK/1000000)
-const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
-const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
-const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
-const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC;
+struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
+struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
+struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
+struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC;
const struct dpll_regs dpll_mpu_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x88,
@@ -63,199 +58,85 @@
const struct dpll_params dpll_per = {
960, OSC-1, 5, -1, -1, -1, -1};
-static void enable_interface_clocks(void)
+void setup_clocks_for_console(void)
{
- /* Enable all the Interconnect Modules */
- writel(PRCM_MOD_EN, &cmper->l3clkctrl);
- while (readl(&cmper->l3clkctrl) != PRCM_MOD_EN)
- ;
+ clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+ CD_CLKCTRL_CLKTRCTRL_SHIFT);
- writel(PRCM_MOD_EN, &cmper->l4lsclkctrl);
- while (readl(&cmper->l4lsclkctrl) != PRCM_MOD_EN)
- ;
+ clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+ CD_CLKCTRL_CLKTRCTRL_SHIFT);
- writel(PRCM_MOD_EN, &cmper->l4fwclkctrl);
- while (readl(&cmper->l4fwclkctrl) != PRCM_MOD_EN)
- ;
-
- writel(PRCM_MOD_EN, &cmwkup->wkl4wkclkctrl);
- while (readl(&cmwkup->wkl4wkclkctrl) != PRCM_MOD_EN)
- ;
-
- writel(PRCM_MOD_EN, &cmper->l3instrclkctrl);
- while (readl(&cmper->l3instrclkctrl) != PRCM_MOD_EN)
- ;
-
- writel(PRCM_MOD_EN, &cmper->l4hsclkctrl);
- while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN)
- ;
-
- writel(PRCM_MOD_EN, &cmwkup->wkgpio0clkctrl);
- while (readl(&cmwkup->wkgpio0clkctrl) != PRCM_MOD_EN)
- ;
+ clrsetbits_le32(&cmwkup->wkup_uart0ctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ clrsetbits_le32(&cmper->uart1clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ clrsetbits_le32(&cmper->uart2clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ clrsetbits_le32(&cmper->uart3clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ clrsetbits_le32(&cmper->uart4clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ clrsetbits_le32(&cmper->uart5clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
}
-/*
- * Force power domain wake up transition
- * Ensure that the corresponding interface clock is active before
- * using the peripheral
- */
-static void power_domain_wkup_transition(void)
+void enable_basic_clocks(void)
{
- writel(PRCM_FORCE_WAKEUP, &cmper->l3clkstctrl);
- writel(PRCM_FORCE_WAKEUP, &cmper->l4lsclkstctrl);
- writel(PRCM_FORCE_WAKEUP, &cmwkup->wkclkstctrl);
- writel(PRCM_FORCE_WAKEUP, &cmper->l4fwclkstctrl);
- writel(PRCM_FORCE_WAKEUP, &cmper->l3sclkstctrl);
-}
+ u32 *const clk_domains[] = {
+ &cmper->l3clkstctrl,
+ &cmper->l4fwclkstctrl,
+ &cmper->l3sclkstctrl,
+ &cmper->l4lsclkstctrl,
+ &cmwkup->wkclkstctrl,
+ &cmper->emiffwclkctrl,
+ &cmrtc->clkstctrl,
+ 0
+ };
-/*
- * Enable the peripheral clock for required peripherals
- */
-static void enable_per_clocks(void)
-{
- /* Enable the control module though RBL would have done it*/
- writel(PRCM_MOD_EN, &cmwkup->wkctrlclkctrl);
- while (readl(&cmwkup->wkctrlclkctrl) != PRCM_MOD_EN)
- ;
+ u32 *const clk_modules_explicit_en[] = {
+ &cmper->l3clkctrl,
+ &cmper->l4lsclkctrl,
+ &cmper->l4fwclkctrl,
+ &cmwkup->wkl4wkclkctrl,
+ &cmper->l3instrclkctrl,
+ &cmper->l4hsclkctrl,
+ &cmwkup->wkgpio0clkctrl,
+ &cmwkup->wkctrlclkctrl,
+ &cmper->timer2clkctrl,
+ &cmper->gpmcclkctrl,
+ &cmper->elmclkctrl,
+ &cmper->mmc0clkctrl,
+ &cmper->mmc1clkctrl,
+ &cmwkup->wkup_i2c0ctrl,
+ &cmper->gpio1clkctrl,
+ &cmper->gpio2clkctrl,
+ &cmper->gpio3clkctrl,
+ &cmper->i2c1clkctrl,
+ &cmper->cpgmac0clkctrl,
+ &cmper->spi0clkctrl,
+ &cmrtc->rtcclkctrl,
+ &cmper->usb0clkctrl,
+ &cmper->emiffwclkctrl,
+ &cmper->emifclkctrl,
+ 0
+ };
- /* Enable the module clock */
- writel(PRCM_MOD_EN, &cmper->timer2clkctrl);
- while (readl(&cmper->timer2clkctrl) != PRCM_MOD_EN)
- ;
+ do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
/* Select the Master osc 24 MHZ as Timer2 clock source */
writel(0x1, &cmdpll->clktimer2clk);
-
- /* UART0 */
- writel(PRCM_MOD_EN, &cmwkup->wkup_uart0ctrl);
- while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
- ;
-
- /* UART1 */
-#ifdef CONFIG_SERIAL2
- writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
- while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
- ;
-#endif /* CONFIG_SERIAL2 */
-
- /* UART2 */
-#ifdef CONFIG_SERIAL3
- writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
- while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
- ;
-#endif /* CONFIG_SERIAL3 */
-
- /* UART3 */
-#ifdef CONFIG_SERIAL4
- writel(PRCM_MOD_EN, &cmper->uart3clkctrl);
- while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN)
- ;
-#endif /* CONFIG_SERIAL4 */
-
- /* UART4 */
-#ifdef CONFIG_SERIAL5
- writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
- while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
- ;
-#endif /* CONFIG_SERIAL5 */
-
- /* UART5 */
-#ifdef CONFIG_SERIAL6
- writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
- while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
- ;
-#endif /* CONFIG_SERIAL6 */
-
- /* GPMC */
- writel(PRCM_MOD_EN, &cmper->gpmcclkctrl);
- while (readl(&cmper->gpmcclkctrl) != PRCM_MOD_EN)
- ;
-
- /* ELM */
- writel(PRCM_MOD_EN, &cmper->elmclkctrl);
- while (readl(&cmper->elmclkctrl) != PRCM_MOD_EN)
- ;
-
- /* MMC0*/
- writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
- while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
- ;
-
- /* MMC1 */
- writel(PRCM_MOD_EN, &cmper->mmc1clkctrl);
- while (readl(&cmper->mmc1clkctrl) != PRCM_MOD_EN)
- ;
-
- /* i2c0 */
- writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl);
- while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN)
- ;
-
- /* gpio1 module */
- writel(PRCM_MOD_EN, &cmper->gpio1clkctrl);
- while (readl(&cmper->gpio1clkctrl) != PRCM_MOD_EN)
- ;
-
- /* gpio2 module */
- writel(PRCM_MOD_EN, &cmper->gpio2clkctrl);
- while (readl(&cmper->gpio2clkctrl) != PRCM_MOD_EN)
- ;
-
- /* gpio3 module */
- writel(PRCM_MOD_EN, &cmper->gpio3clkctrl);
- while (readl(&cmper->gpio3clkctrl) != PRCM_MOD_EN)
- ;
-
- /* i2c1 */
- writel(PRCM_MOD_EN, &cmper->i2c1clkctrl);
- while (readl(&cmper->i2c1clkctrl) != PRCM_MOD_EN)
- ;
-
- /* Ethernet */
- writel(PRCM_MOD_EN, &cmper->cpgmac0clkctrl);
- while ((readl(&cmper->cpgmac0clkctrl) & CPGMAC0_IDLE) != PRCM_FUNCTL)
- ;
-
- /* spi0 */
- writel(PRCM_MOD_EN, &cmper->spi0clkctrl);
- while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN)
- ;
-
- /* RTC */
- writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
- while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
- ;
-
- /* MUSB */
- writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
- while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
- ;
-}
-
-void enable_emif_clocks(void)
-{
- /* Enable the EMIF_FW Functional clock */
- writel(PRCM_MOD_EN, &cmper->emiffwclkctrl);
- /* Enable EMIF0 Clock */
- writel(PRCM_MOD_EN, &cmper->emifclkctrl);
- /* Poll if module is functional */
- while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN)
- ;
-}
-
-/*
- * Configure the PLL/PRCM for necessary peripherals
- */
-void pll_init()
-{
- setup_dplls();
- /* Enable the required interconnect clocks */
- enable_interface_clocks();
-
- /* Power domain wake up transition */
- power_domain_wkup_transition();
-
- /* Enable the required peripherals */
- enable_per_clocks();
}
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
index 658772b..965e875 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -264,11 +264,6 @@
*/
static void enable_per_clocks(void)
{
- /* UART0 */
- writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
- while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
- ;
-
/* HSMMC1 */
writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
@@ -455,8 +450,6 @@
;
}
-void enable_emif_clocks(void) {};
-
void enable_dmm_clocks(void)
{
writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
@@ -477,13 +470,19 @@
;
}
+void setup_clocks_for_console(void)
+{
+ unlock_pll_control_mmr();
+ /* UART0 */
+ writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
+ while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
+ ;
+}
/*
* Configure the PLL/PRCM for necessary peripherals
*/
-void pll_init()
+void prcm_init(void)
{
- unlock_pll_control_mmr();
-
/* Enable the control module */
writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 15c4734..21cefd4 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -87,7 +87,6 @@
const struct ddr_data *data, const struct cmd_control *ctrl,
const struct emif_regs *regs, int nr)
{
- enable_emif_clocks();
ddr_pll_config(pll);
config_vtp(nr);
config_cmd_ctrl(ctrl, nr);
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index 703b80e..0d4b9ae 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -15,6 +15,28 @@
#define LDELAY 1000000
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0
+#define CD_CLKCTRL_CLKTRCTRL_MASK 3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0
+#define MODULE_CLKCTRL_MODULEMODE_MASK 3
+#define MODULE_CLKCTRL_IDLEST_SHIFT 16
+#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1
+#define MODULE_CLKCTRL_IDLEST_IDLE 2
+#define MODULE_CLKCTRL_IDLEST_DISABLED 3
+
/* CM_CLKMODE_DPLL */
#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11
#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11)
@@ -77,10 +99,12 @@
extern const struct dpll_params dpll_per;
extern const struct dpll_params dpll_ddr;
-extern const struct cm_wkuppll *cmwkup;
+extern struct cm_wkuppll *const cmwkup;
-void setup_dplls(void);
const struct dpll_params *get_dpll_ddr_params(void);
void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *);
+void prcm_init(void);
+void enable_basic_clocks(void);
+void do_enable_clocks(u32 *const *, u32 *const *, u8);
#endif
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 683ba8e..18d7d99 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -146,8 +146,6 @@
*/
void config_ddr_phy(const struct emif_regs *regs, int nr);
-void ddr_pll_config(unsigned int ddrpll_m);
-
struct ddr_cmd_regs {
unsigned int resv0[7];
unsigned int cm0csratio; /* offset 0x01C */
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
index 034a8aa..a065a74 100644
--- a/board/isee/igep0033/board.c
+++ b/board/isee/igep0033/board.c
@@ -103,11 +103,7 @@
;
#ifdef CONFIG_SPL_BUILD
- /* Setup the PLLs and the clocks for the peripherals */
- pll_init();
-
- /* Enable RTC32K clock */
- rtc32k_enable();
+ setup_clocks_for_console();
enable_uart0_pin_mux();
@@ -116,6 +112,11 @@
preloader_console_init();
+ prcm_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
/* Configure board pin mux */
enable_board_pin_mux();
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 2be2297..a6edc2d 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -317,10 +317,7 @@
#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
/* Setup the PLLs and the clocks for the peripherals */
- pll_init();
-
- /* Enable RTC32K clock */
- rtc32k_enable();
+ setup_clocks_for_console();
#ifdef CONFIG_SERIAL1
enable_uart0_pin_mux();
@@ -354,12 +351,14 @@
preloader_console_init();
#endif
- /* Initalize the board header */
- enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ prcm_init();
+
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
enable_board_pin_mux(&header);
if (board_is_evm_sk(&header)) {
/*
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index c469645..bd708bb 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -125,11 +125,7 @@
/* Enable timer */
timer_init();
- /* Setup the PLLs and the clocks for the peripherals */
- pll_init();
-
- /* Enable RTC32K clock */
- rtc32k_enable();
+ setup_clocks_for_console();
/* Set UART pins */
enable_uart0_pin_mux();
@@ -147,6 +143,12 @@
preloader_console_init();
+ /* Setup the PLLs and the clocks for the peripherals */
+ prcm_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
config_dmm(&evm_lisa_map_regs);
config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,