diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index f1623db..64a3af7 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -56,12 +56,6 @@
 }
 #endif
 
-void setup_clocks_for_console(void)
-{
-	/* Not yet implemented */
-	return;
-}
-
 /* AM33XX has two MUSB controllers which can be host or gadget */
 #if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
 	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 15f4a2c..8e5f3c6 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -98,7 +98,7 @@
 	wait_for_lock(dpll_regs);
 }
 
-void setup_dplls(void)
+static void setup_dplls(void)
 {
 	const struct dpll_params *params;
 	do_setup_dpll(&dpll_core_regs, &dpll_core);
@@ -109,3 +109,63 @@
 	params = get_dpll_ddr_params();
 	do_setup_dpll(&dpll_ddr_regs, params);
 }
+
+static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+{
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+	u32 bound = LDELAY;
+
+	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+		clkctrl = readl(clkctrl_addr);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+		if (--bound == 0) {
+			printf("Clock enable failed for 0x%p idlest 0x%x\n",
+			       clkctrl_addr, clkctrl);
+			return;
+		}
+	}
+}
+
+static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+				       u32 wait_for_enable)
+{
+	clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+			enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	debug("Enable clock module - %p\n", clkctrl_addr);
+	if (wait_for_enable)
+		wait_for_clk_enable(clkctrl_addr);
+}
+
+static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+{
+	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+			enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
+	debug("Enable clock domain - %p\n", clkctrl_reg);
+}
+
+void do_enable_clocks(u32 *const *clk_domains,
+		      u32 *const *clk_modules_explicit_en, u8 wait_for_enable)
+{
+	u32 i, max = 100;
+
+	/* Put the clock domains in SW_WKUP mode */
+	for (i = 0; (i < max) && clk_domains[i]; i++) {
+		enable_clock_domain(clk_domains[i],
+				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	}
+
+	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+	for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) {
+		enable_clock_module(clk_modules_explicit_en[i],
+				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+				    wait_for_enable);
+	};
+}
+
+void prcm_init()
+{
+	enable_basic_clocks();
+	setup_dplls();
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index d5d47ad..e5f287b 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -14,17 +14,12 @@
 #include <asm/arch/hardware.h>
 #include <asm/io.h>
 
-#define PRCM_MOD_EN		0x2
-#define PRCM_FORCE_WAKEUP	0x2
-#define PRCM_FUNCTL		0x0
-
-#define CPGMAC0_IDLE		0x30000
 #define OSC	(V_OSCK/1000000)
 
-const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
-const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
-const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
-const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC;
+struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
+struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
+struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
+struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC;
 
 const struct dpll_regs dpll_mpu_regs = {
 	.cm_clkmode_dpll	= CM_WKUP + 0x88,
@@ -63,199 +58,85 @@
 const struct dpll_params dpll_per = {
 		960, OSC-1, 5, -1, -1, -1, -1};
 
-static void enable_interface_clocks(void)
+void setup_clocks_for_console(void)
 {
-	/* Enable all the Interconnect Modules */
-	writel(PRCM_MOD_EN, &cmper->l3clkctrl);
-	while (readl(&cmper->l3clkctrl) != PRCM_MOD_EN)
-		;
+	clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
 
-	writel(PRCM_MOD_EN, &cmper->l4lsclkctrl);
-	while (readl(&cmper->l4lsclkctrl) != PRCM_MOD_EN)
-		;
+	clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+			CD_CLKCTRL_CLKTRCTRL_SHIFT);
 
-	writel(PRCM_MOD_EN, &cmper->l4fwclkctrl);
-	while (readl(&cmper->l4fwclkctrl) != PRCM_MOD_EN)
-		;
-
-	writel(PRCM_MOD_EN, &cmwkup->wkl4wkclkctrl);
-	while (readl(&cmwkup->wkl4wkclkctrl) != PRCM_MOD_EN)
-		;
-
-	writel(PRCM_MOD_EN, &cmper->l3instrclkctrl);
-	while (readl(&cmper->l3instrclkctrl) != PRCM_MOD_EN)
-		;
-
-	writel(PRCM_MOD_EN, &cmper->l4hsclkctrl);
-	while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN)
-		;
-
-	writel(PRCM_MOD_EN, &cmwkup->wkgpio0clkctrl);
-	while (readl(&cmwkup->wkgpio0clkctrl) != PRCM_MOD_EN)
-		;
+	clrsetbits_le32(&cmwkup->wkup_uart0ctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart1clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart2clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart3clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart4clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	clrsetbits_le32(&cmper->uart5clkctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
 }
 
-/*
- * Force power domain wake up transition
- * Ensure that the corresponding interface clock is active before
- * using the peripheral
- */
-static void power_domain_wkup_transition(void)
+void enable_basic_clocks(void)
 {
-	writel(PRCM_FORCE_WAKEUP, &cmper->l3clkstctrl);
-	writel(PRCM_FORCE_WAKEUP, &cmper->l4lsclkstctrl);
-	writel(PRCM_FORCE_WAKEUP, &cmwkup->wkclkstctrl);
-	writel(PRCM_FORCE_WAKEUP, &cmper->l4fwclkstctrl);
-	writel(PRCM_FORCE_WAKEUP, &cmper->l3sclkstctrl);
-}
+	u32 *const clk_domains[] = {
+		&cmper->l3clkstctrl,
+		&cmper->l4fwclkstctrl,
+		&cmper->l3sclkstctrl,
+		&cmper->l4lsclkstctrl,
+		&cmwkup->wkclkstctrl,
+		&cmper->emiffwclkctrl,
+		&cmrtc->clkstctrl,
+		0
+	};
 
-/*
- * Enable the peripheral clock for required peripherals
- */
-static void enable_per_clocks(void)
-{
-	/* Enable the control module though RBL would have done it*/
-	writel(PRCM_MOD_EN, &cmwkup->wkctrlclkctrl);
-	while (readl(&cmwkup->wkctrlclkctrl) != PRCM_MOD_EN)
-		;
+	u32 *const clk_modules_explicit_en[] = {
+		&cmper->l3clkctrl,
+		&cmper->l4lsclkctrl,
+		&cmper->l4fwclkctrl,
+		&cmwkup->wkl4wkclkctrl,
+		&cmper->l3instrclkctrl,
+		&cmper->l4hsclkctrl,
+		&cmwkup->wkgpio0clkctrl,
+		&cmwkup->wkctrlclkctrl,
+		&cmper->timer2clkctrl,
+		&cmper->gpmcclkctrl,
+		&cmper->elmclkctrl,
+		&cmper->mmc0clkctrl,
+		&cmper->mmc1clkctrl,
+		&cmwkup->wkup_i2c0ctrl,
+		&cmper->gpio1clkctrl,
+		&cmper->gpio2clkctrl,
+		&cmper->gpio3clkctrl,
+		&cmper->i2c1clkctrl,
+		&cmper->cpgmac0clkctrl,
+		&cmper->spi0clkctrl,
+		&cmrtc->rtcclkctrl,
+		&cmper->usb0clkctrl,
+		&cmper->emiffwclkctrl,
+		&cmper->emifclkctrl,
+		0
+	};
 
-	/* Enable the module clock */
-	writel(PRCM_MOD_EN, &cmper->timer2clkctrl);
-	while (readl(&cmper->timer2clkctrl) != PRCM_MOD_EN)
-		;
+	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
 
 	/* Select the Master osc 24 MHZ as Timer2 clock source */
 	writel(0x1, &cmdpll->clktimer2clk);
-
-	/* UART0 */
-	writel(PRCM_MOD_EN, &cmwkup->wkup_uart0ctrl);
-	while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
-		;
-
-	/* UART1 */
-#ifdef CONFIG_SERIAL2
-	writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
-	while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
-		;
-#endif /* CONFIG_SERIAL2 */
-
-	/* UART2 */
-#ifdef CONFIG_SERIAL3
-	writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
-	while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
-		;
-#endif /* CONFIG_SERIAL3 */
-
-	/* UART3 */
-#ifdef CONFIG_SERIAL4
-	writel(PRCM_MOD_EN, &cmper->uart3clkctrl);
-	while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN)
-		;
-#endif /* CONFIG_SERIAL4 */
-
-	/* UART4 */
-#ifdef CONFIG_SERIAL5
-	writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
-	while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
-		;
-#endif /* CONFIG_SERIAL5 */
-
-	/* UART5 */
-#ifdef CONFIG_SERIAL6
-	writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
-	while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
-		;
-#endif /* CONFIG_SERIAL6 */
-
-	/* GPMC */
-	writel(PRCM_MOD_EN, &cmper->gpmcclkctrl);
-	while (readl(&cmper->gpmcclkctrl) != PRCM_MOD_EN)
-		;
-
-	/* ELM */
-	writel(PRCM_MOD_EN, &cmper->elmclkctrl);
-	while (readl(&cmper->elmclkctrl) != PRCM_MOD_EN)
-		;
-
-	/* MMC0*/
-	writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
-	while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* MMC1 */
-	writel(PRCM_MOD_EN, &cmper->mmc1clkctrl);
-	while (readl(&cmper->mmc1clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* i2c0 */
-	writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl);
-	while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN)
-		;
-
-	/* gpio1 module */
-	writel(PRCM_MOD_EN, &cmper->gpio1clkctrl);
-	while (readl(&cmper->gpio1clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* gpio2 module */
-	writel(PRCM_MOD_EN, &cmper->gpio2clkctrl);
-	while (readl(&cmper->gpio2clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* gpio3 module */
-	writel(PRCM_MOD_EN, &cmper->gpio3clkctrl);
-	while (readl(&cmper->gpio3clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* i2c1 */
-	writel(PRCM_MOD_EN, &cmper->i2c1clkctrl);
-	while (readl(&cmper->i2c1clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* Ethernet */
-	writel(PRCM_MOD_EN, &cmper->cpgmac0clkctrl);
-	while ((readl(&cmper->cpgmac0clkctrl) & CPGMAC0_IDLE) != PRCM_FUNCTL)
-		;
-
-	/* spi0 */
-	writel(PRCM_MOD_EN, &cmper->spi0clkctrl);
-	while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* RTC */
-	writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
-	while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
-		;
-
-	/* MUSB */
-	writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
-	while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
-		;
-}
-
-void enable_emif_clocks(void)
-{
-	/* Enable the  EMIF_FW Functional clock */
-	writel(PRCM_MOD_EN, &cmper->emiffwclkctrl);
-	/* Enable EMIF0 Clock */
-	writel(PRCM_MOD_EN, &cmper->emifclkctrl);
-	/* Poll if module is functional */
-	while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN)
-		;
-}
-
-/*
- * Configure the PLL/PRCM for necessary peripherals
- */
-void pll_init()
-{
-	setup_dplls();
-	/* Enable the required interconnect clocks */
-	enable_interface_clocks();
-
-	/* Power domain wake up transition */
-	power_domain_wkup_transition();
-
-	/* Enable the required peripherals */
-	enable_per_clocks();
 }
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
index 658772b..965e875 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -264,11 +264,6 @@
  */
 static void enable_per_clocks(void)
 {
-	/* UART0 */
-	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
-	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
-		;
-
 	/* HSMMC1 */
 	writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
 	while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
@@ -455,8 +450,6 @@
 		;
 }
 
-void enable_emif_clocks(void) {};
-
 void enable_dmm_clocks(void)
 {
 	writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
@@ -477,13 +470,19 @@
 		;
 }
 
+void setup_clocks_for_console(void)
+{
+	unlock_pll_control_mmr();
+	/* UART0 */
+	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
+	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
+		;
+}
 /*
  * Configure the PLL/PRCM for necessary peripherals
  */
-void pll_init()
+void prcm_init(void)
 {
-	unlock_pll_control_mmr();
-
 	/* Enable the control module */
 	writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
 
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 15c4734..21cefd4 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -87,7 +87,6 @@
 		const struct ddr_data *data, const struct cmd_control *ctrl,
 		const struct emif_regs *regs, int nr)
 {
-	enable_emif_clocks();
 	ddr_pll_config(pll);
 	config_vtp(nr);
 	config_cmd_ctrl(ctrl, nr);
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index 703b80e..0d4b9ae 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -15,6 +15,28 @@
 
 #define LDELAY 1000000
 
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT		0
+#define CD_CLKCTRL_CLKTRCTRL_MASK		3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP		0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP		1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP		2
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT		0
+#define MODULE_CLKCTRL_MODULEMODE_MASK		3
+#define MODULE_CLKCTRL_IDLEST_SHIFT		16
+#define MODULE_CLKCTRL_IDLEST_MASK		(3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE		0
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN	2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL	0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING	1
+#define MODULE_CLKCTRL_IDLEST_IDLE		2
+#define MODULE_CLKCTRL_IDLEST_DISABLED		3
+
 /* CM_CLKMODE_DPLL */
 #define CM_CLKMODE_DPLL_REGM4XEN_SHIFT		11
 #define CM_CLKMODE_DPLL_REGM4XEN_MASK		(1 << 11)
@@ -77,10 +99,12 @@
 extern const struct dpll_params dpll_per;
 extern const struct dpll_params dpll_ddr;
 
-extern const struct cm_wkuppll *cmwkup;
+extern struct cm_wkuppll *const cmwkup;
 
-void setup_dplls(void);
 const struct dpll_params *get_dpll_ddr_params(void);
 void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *);
+void prcm_init(void);
+void enable_basic_clocks(void);
+void do_enable_clocks(u32 *const *, u32 *const *, u8);
 
 #endif
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 683ba8e..18d7d99 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -146,8 +146,6 @@
  */
 void config_ddr_phy(const struct emif_regs *regs, int nr);
 
-void ddr_pll_config(unsigned int ddrpll_m);
-
 struct ddr_cmd_regs {
 	unsigned int resv0[7];
 	unsigned int cm0csratio;	/* offset 0x01C */
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
index 034a8aa..a065a74 100644
--- a/board/isee/igep0033/board.c
+++ b/board/isee/igep0033/board.c
@@ -103,11 +103,7 @@
 		;
 
 #ifdef CONFIG_SPL_BUILD
-	/* Setup the PLLs and the clocks for the peripherals */
-	pll_init();
-
-	/* Enable RTC32K clock */
-	rtc32k_enable();
+	setup_clocks_for_console();
 
 	enable_uart0_pin_mux();
 
@@ -116,6 +112,11 @@
 
 	preloader_console_init();
 
+	prcm_init();
+
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+
 	/* Configure board pin mux */
 	enable_board_pin_mux();
 
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 2be2297..a6edc2d 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -317,10 +317,7 @@
 
 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 	/* Setup the PLLs and the clocks for the peripherals */
-	pll_init();
-
-	/* Enable RTC32K clock */
-	rtc32k_enable();
+	setup_clocks_for_console();
 
 #ifdef CONFIG_SERIAL1
 	enable_uart0_pin_mux();
@@ -354,12 +351,14 @@
 	preloader_console_init();
 #endif
 
-	/* Initalize the board header */
-	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	prcm_init();
+
 	if (read_eeprom(&header) < 0)
 		puts("Could not get board ID.\n");
 
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+
 	enable_board_pin_mux(&header);
 	if (board_is_evm_sk(&header)) {
 		/*
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index c469645..bd708bb 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -125,11 +125,7 @@
 	/* Enable timer */
 	timer_init();
 
-	/* Setup the PLLs and the clocks for the peripherals */
-	pll_init();
-
-	/* Enable RTC32K clock */
-	rtc32k_enable();
+	setup_clocks_for_console();
 
 	/* Set UART pins */
 	enable_uart0_pin_mux();
@@ -147,6 +143,12 @@
 
 	preloader_console_init();
 
+	/* Setup the PLLs and the clocks for the peripherals */
+	prcm_init();
+
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+
 	config_dmm(&evm_lisa_map_regs);
 
 	config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,