| /* |
| * (C) Copyright 2001 |
| * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * board/config.h - configuration options, board specific |
| */ |
| |
| /************************************************************************* |
| * (c) 2004 esd gmbh Hannover |
| * |
| * |
| * from db64360.h file |
| * by Reinhard Arlt reinhard.arlt@esd-electronics.com |
| * |
| ************************************************************************/ |
| |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* This define must be before the core.h include */ |
| #define CONFIG_CPCI750 1 /* this is an CPCI750 board */ |
| |
| #ifndef __ASSEMBLY__ |
| #include <../board/Marvell/include/core.h> |
| #endif |
| /*-----------------------------------------------------*/ |
| |
| #include "../board/esd/cpci750/local.h" |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| #define CONFIG_750FX /* we have a 750FX (override local.h) */ |
| |
| #define CONFIG_CPCI750 1 /* this is an CPCI750 board */ |
| |
| #define CONFIG_SYS_TEXT_BASE 0xfff00000 |
| |
| #define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ |
| |
| #define CONFIG_MV64360_ECC /* enable ECC support */ |
| |
| #define CONFIG_HIGH_BATS 1 /* High BATs supported */ |
| |
| /* which initialization functions to call for this board */ |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_BOARD_PRE_INIT |
| #define CONFIG_BOARD_EARLY_INIT_F 1 |
| |
| #define CONFIG_SYS_BOARD_NAME "CPCI750" |
| #define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX" |
| |
| /*#define CONFIG_SYS_HUSH_PARSER*/ |
| #define CONFIG_SYS_HUSH_PARSER |
| |
| |
| #define CONFIG_CMDLINE_EDITING /* add command line history */ |
| #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
| |
| /* Define which ETH port will be used for connecting the network */ |
| #define CONFIG_SYS_ETH_PORT ETH_0 |
| |
| /* |
| * The following defines let you select what serial you want to use |
| * for your console driver. |
| * |
| * what to do: |
| * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial |
| * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 |
| * to 0 below. |
| * |
| * to use the MPSC, #define CONFIG_MPSC. If you have wired up another |
| * mpsc channel, change CONFIG_MPSC_PORT to the desired value. |
| */ |
| #define CONFIG_MPSC |
| #define CONFIG_MPSC_PORT 0 |
| |
| /* to change the default ethernet port, use this define (options: 0, 1, 2) */ |
| #define MV_ETH_DEVS 1 |
| #define CONFIG_ETHER_PORT 0 |
| |
| #undef CONFIG_ETHER_PORT_MII /* use RMII */ |
| |
| #define CONFIG_BOOTDELAY 5 /* autoboot disabled */ |
| |
| #define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ |
| |
| #define CONFIG_ZERO_BOOTDELAY_CHECK |
| |
| |
| #undef CONFIG_BOOTARGS |
| |
| /* ----------------------------------------------------------------------------- |
| * New bootcommands for Marvell CPCI750 c 2002 Ingo Assmus |
| */ |
| |
| #define CONFIG_IPADDR "192.168.0.185" |
| |
| #define CONFIG_SERIAL "AA000001" |
| #define CONFIG_SERVERIP "10.0.0.79" |
| #define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" |
| |
| #define CONFIG_TESTDRAMDATA y |
| #define CONFIG_TESTDRAMADDRESS n |
| #define CONFIG_TESETDRAMWALK n |
| |
| /* ----------------------------------------------------------------------------- */ |
| |
| |
| #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ |
| |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ |
| #undef CONFIG_ALTIVEC /* undef to disable */ |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_PCI |
| #define CONFIG_CMD_ELF |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_EXT2 |
| |
| |
| #define CONFIG_DOS_PARTITION |
| |
| #define CONFIG_USE_CPCIDVI |
| |
| #ifdef CONFIG_USE_CPCIDVI |
| #define CONFIG_VIDEO |
| #define CONFIG_VIDEO_CT69000 |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_VIDEO_SW_CURSOR |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_I8042_KBD |
| #define CONFIG_SYS_ISA_IO 0 |
| #endif |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| #define CONFIG_SYS_I2C_MULTI_EEPROMS |
| #define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */ |
| |
| #define CONFIG_PRAM 0 |
| |
| #define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| /*#define CONFIG_SYS_MEMTEST_START 0x00400000*/ /* memtest works on */ |
| /*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ |
| /*#define CONFIG_SYS_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ |
| |
| /* |
| #define CONFIG_SYS_DRAM_TEST |
| * DRAM tests |
| * CONFIG_SYS_DRAM_TEST - enables the following tests. |
| * |
| * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines |
| * Environment variable 'test_dram_data' must be |
| * set to 'y'. |
| * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely |
| * addressable. Environment variable |
| * 'test_dram_address' must be set to 'y'. |
| * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. |
| * This test takes about 6 minutes to test 64 MB. |
| * Environment variable 'test_dram_walk' must be |
| * set to 'y'. |
| */ |
| #define CONFIG_SYS_DRAM_TEST |
| #if defined(CONFIG_SYS_DRAM_TEST) |
| #define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ |
| /*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ |
| #define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ |
| #define CONFIG_SYS_DRAM_TEST_DATA |
| #define CONFIG_SYS_DRAM_TEST_ADDRESS |
| #define CONFIG_SYS_DRAM_TEST_WALK |
| #endif /* CONFIG_SYS_DRAM_TEST */ |
| |
| #define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ |
| #undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ |
| |
| #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } |
| |
| #define CONFIG_SYS_TCLK 133000000 |
| |
| /* |
| * Low Level Configuration Settings |
| * (address mappings, register initial values, etc.) |
| * You should know what you are doing if you make changes here. |
| */ |
| |
| /*----------------------------------------------------------------------- |
| * Definitions for initial stack pointer and data area |
| */ |
| |
| /* |
| * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS |
| * To an unused memory region. The stack will remain in cache until RAM |
| * is initialized |
| */ |
| #undef CONFIG_SYS_INIT_RAM_LOCK |
| /* #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ |
| /* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ |
| #define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| |
| #define RELOCATE_INTERNAL_RAM_ADDR |
| #ifdef RELOCATE_INTERNAL_RAM_ADDR |
| /*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/ |
| #define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf1080000 |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Start addresses for the final memory configuration |
| * (Set up by the startup code) |
| * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
| */ |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| /* Dummies for BAT 4-7 */ |
| #define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ |
| #define CONFIG_SYS_SDRAM2_BASE 0x20000000 |
| #define CONFIG_SYS_SDRAM3_BASE 0x30000000 |
| #define CONFIG_SYS_SDRAM4_BASE 0x40000000 |
| #define CONFIG_SYS_RESET_ADDRESS 0xfff00100 |
| #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ |
| #define CONFIG_SYS_MONITOR_BASE 0xfff00000 |
| #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ |
| |
| /*----------------------------------------------------------------------- |
| * FLASH related |
| *----------------------------------------------------------------------*/ |
| |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ |
| #define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ |
| #define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of flash banks */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */ |
| #define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* size of flash bank */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ |
| CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT, \ |
| CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT, \ |
| CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT } |
| #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* show if bank is empty */ |
| |
| /* areas to map different things with the GT in physical space */ |
| #define CONFIG_SYS_DRAM_BANKS 4 |
| |
| /* What to put in the bats. */ |
| #define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 |
| |
| /* Peripheral Device section */ |
| |
| /*******************************************************/ |
| /* We have on the cpci750 Board : */ |
| /* GT-Chipset Register Area */ |
| /* GT-Chipset internal SRAM 256k */ |
| /* SRAM on external device module */ |
| /* Real time clock on external device module */ |
| /* dobble UART on external device module */ |
| /* Data flash on external device module */ |
| /* Boot flash on external device module */ |
| /*******************************************************/ |
| #define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ |
| #define CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ |
| |
| #undef MARVEL_STANDARD_CFG |
| #ifndef MARVEL_STANDARD_CFG |
| /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ |
| #define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ |
| /*#define CONFIG_SYS_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ |
| #define CONFIG_SYS_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */ |
| |
| #define CONFIG_SYS_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */ |
| #define CONFIG_SYS_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */ |
| #define CONFIG_SYS_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */ |
| #define CONFIG_SYS_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ |
| #define CONFIG_SYS_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ |
| |
| #define CONFIG_SYS_BOOT_SIZE _16M /* cpci750 flash 0 */ |
| #define CONFIG_SYS_DEV0_SIZE _16M /* cpci750 flash 1 */ |
| #define CONFIG_SYS_DEV1_SIZE _16M /* cpci750 flash 2 */ |
| #define CONFIG_SYS_DEV2_SIZE _16M /* cpci750 flash 3 */ |
| #define CONFIG_SYS_DEV3_SIZE _16M /* cpci750 nvram/can */ |
| |
| /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ |
| #endif |
| |
| /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ |
| #define CONFIG_SYS_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ |
| #define CONFIG_SYS_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ |
| #define CONFIG_SYS_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ |
| #define CONFIG_SYS_DEV3_PAR 0x8FCFFFFF /* nvram/can */ |
| #define CONFIG_SYS_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ |
| |
| /* c 4 a 8 2 4 1 c */ |
| /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ |
| /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ |
| /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ |
| /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ |
| |
| |
| /* MPP Control MV64360 Appendix P P. 632*/ |
| #define CONFIG_SYS_MPP_CONTROL_0 0x00002222 /* */ |
| #define CONFIG_SYS_MPP_CONTROL_1 0x11110000 /* */ |
| #define CONFIG_SYS_MPP_CONTROL_2 0x11111111 /* */ |
| #define CONFIG_SYS_MPP_CONTROL_3 0x00001111 /* */ |
| /* #define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102*/ /* */ |
| |
| |
| #define CONFIG_SYS_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ |
| |
| /* setup new config_value for MV64360 DDR-RAM To_do !! */ |
| /*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */ |
| /*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */ |
| /* GB has high prio. |
| idma has low prio |
| MPSC has low prio |
| pci has low prio 1 and 2 |
| cpu has high prio |
| Data DQS pins == eight (DQS[7:0] foe x8 and x16 devices |
| ECC disable |
| non registered DRAM */ |
| /* 31:26 25:22 21:20 19 18 17 16 */ |
| /* 100001 0000 010 0 0 0 0 */ |
| /* refresh_count=0x400 |
| phisical interleaving disable |
| virtual interleaving enable */ |
| /* 15 14 13:0 */ |
| /* 0 1 0x400 */ |
| # define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ |
| |
| |
| /*----------------------------------------------------------------------- |
| * PCI stuff |
| *----------------------------------------------------------------------- |
| */ |
| |
| #define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ |
| #define PCI_HOST_FORCE 1 /* configure as pci host */ |
| #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ |
| |
| #define CONFIG_PCI /* include pci support */ |
| #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| #define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ |
| |
| /* PCI MEMORY MAP section */ |
| #define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 |
| #define CONFIG_SYS_PCI0_MEM_SIZE _128M |
| #define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 |
| #define CONFIG_SYS_PCI1_MEM_SIZE _128M |
| |
| #define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) |
| #define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) |
| |
| /* PCI I/O MAP section */ |
| #define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 |
| #define CONFIG_SYS_PCI0_IO_SIZE _16M |
| #define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 |
| #define CONFIG_SYS_PCI1_IO_SIZE _16M |
| |
| #define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) |
| #define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000 |
| #define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) |
| #define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000 |
| |
| #define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE) |
| |
| #if defined (CONFIG_750CX) |
| #define CONFIG_SYS_PCI_IDSEL 0x0 |
| #else |
| #define CONFIG_SYS_PCI_IDSEL 0x30 |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * IDE/ATA stuff |
| *----------------------------------------------------------------------- |
| */ |
| #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ |
| #undef CONFIG_IDE_LED /* no led for ide supported */ |
| #define CONFIG_IDE_RESET /* no reset for ide supported */ |
| #define CONFIG_IDE_PREINIT /* check for units */ |
| |
| #define CONFIG_SYS_IDE_MAXBUS 2 /* max. 1 IDE busses */ |
| #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ |
| |
| #define CONFIG_SYS_ATA_BASE_ADDR 0 |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0 |
| #define CONFIG_SYS_ATA_IDE1_OFFSET 0 |
| |
| #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ |
| #define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ |
| #define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ |
| #ifndef __ASSEMBLY__ |
| int ata_device(int dev); |
| #endif |
| #define ATA_DEVICE(dev) ata_device(dev) |
| #define CONFIG_ATAPI 1 |
| |
| /*---------------------------------------------------------------------- |
| * Initial BAT mappings |
| */ |
| |
| /* NOTES: |
| * 1) GUARDED and WRITE_THRU not allowed in IBATS |
| * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT |
| */ |
| |
| /* SDRAM */ |
| #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U |
| |
| /* init ram */ |
| #define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) |
| #define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L |
| #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U |
| |
| /* PCI0, PCI1 in one BAT */ |
| #define CONFIG_SYS_IBAT2L BATL_NO_ACCESS |
| #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U |
| #define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| |
| /* GT regs, bootrom, all the devices, PCI I/O */ |
| #define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) |
| #define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) |
| #define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U |
| |
| /* |
| * 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7) |
| * IBAT4 and DBAT4 |
| * FIXME: ingo disable BATs for Linux Kernel |
| */ |
| /* #undef SETUP_HIGH_BATS_FX750 */ /* don't initialize BATS 4-7 */ |
| #define SETUP_HIGH_BATS_FX750 /* initialize BATS 4-7 */ |
| |
| #ifdef SETUP_HIGH_BATS_FX750 |
| #define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U |
| |
| /* IBAT5 and DBAT5 */ |
| #define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U |
| |
| /* IBAT6 and DBAT6 */ |
| #define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U |
| |
| /* IBAT7 and DBAT7 */ |
| #define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U |
| |
| #else /* set em out of range for Linux !!!!!!!!!!! */ |
| #define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U |
| |
| /* IBAT5 and DBAT5 */ |
| #define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U |
| |
| /* IBAT6 and DBAT6 */ |
| #define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U |
| |
| /* IBAT7 and DBAT7 */ |
| #define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U |
| |
| #endif |
| /* FIXME: ingo end: disable BATs for Linux Kernel */ |
| |
| /* I2C addresses for the two DIMM SPD chips */ |
| #define DIMM0_I2C_ADDR 0x51 |
| #define DIMM1_I2C_ADDR 0x52 |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ |
| |
| /*----------------------------------------------------------------------- |
| * FLASH organization |
| */ |
| #define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */ |
| |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
| #define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ |
| |
| #if 0 |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ |
| /* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ |
| #endif |
| |
| #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 |
| #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 |
| #define CONFIG_SYS_I2C_EEPROM_ADDR 0x050 |
| #define CONFIG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */ |
| #define CONFIG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/ |
| |
| #define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ |
| #define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ |
| #define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40) |
| |
| /*----------------------------------------------------------------------- |
| * Cache Configuration |
| */ |
| #define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * L2CR setup -- make sure this is right for your board! |
| * look in include/mpc74xx.h for the defines used here |
| */ |
| |
| /*#define CONFIG_SYS_L2*/ |
| #undef CONFIG_SYS_L2 |
| |
| /* #ifdef CONFIG_750CX*/ |
| #if defined (CONFIG_750CX) || defined (CONFIG_750FX) |
| #define L2_INIT 0 |
| #else |
| #define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ |
| L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) |
| #endif |
| |
| #define L2_ENABLE (L2_INIT | L2CR_L2E) |
| |
| #define CONFIG_SYS_BOARD_ASM_INIT 1 |
| |
| #define CPCI750_SLAVE_TEST (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1) |
| #define CPCI750_ECC_TEST (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0) |
| #define CONFIG_SYS_PLD_VER 0xf0e00000 |
| |
| #define CONFIG_OF_LIBFDT 1 |
| |
| #endif /* __CONFIG_H */ |