| /* |
| * Copyright (C) 2014 Freescale Semiconductor |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <errno.h> |
| #include <asm/io.h> |
| #include <fsl-mc/fsl_mc.h> |
| #include <fsl-mc/fsl_mc_sys.h> |
| #include <fsl-mc/fsl_mc_private.h> |
| #include <fsl-mc/fsl_dpmng.h> |
| #include <fsl_debug_server.h> |
| #include <fsl-mc/fsl_dprc.h> |
| #include <fsl-mc/fsl_dpio.h> |
| #include <fsl-mc/fsl_qbman_portal.h> |
| |
| #define MC_RAM_BASE_ADDR_ALIGNMENT (512UL * 1024 * 1024) |
| #define MC_RAM_BASE_ADDR_ALIGNMENT_MASK (~(MC_RAM_BASE_ADDR_ALIGNMENT - 1)) |
| #define MC_RAM_SIZE_ALIGNMENT (256UL * 1024 * 1024) |
| |
| #define MC_MEM_SIZE_ENV_VAR "mcmemsize" |
| #define MC_BOOT_TIMEOUT_ENV_VAR "mcboottimeout" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| static int mc_boot_status; |
| struct fsl_mc_io *dflt_mc_io = NULL; |
| uint16_t dflt_dprc_handle = 0; |
| struct fsl_dpbp_obj *dflt_dpbp = NULL; |
| struct fsl_dpio_obj *dflt_dpio = NULL; |
| uint16_t dflt_dpio_handle = 0; |
| |
| #ifdef DEBUG |
| void dump_ram_words(const char *title, void *addr) |
| { |
| int i; |
| uint32_t *words = addr; |
| |
| printf("Dumping beginning of %s (%p):\n", title, addr); |
| for (i = 0; i < 16; i++) |
| printf("%#x ", words[i]); |
| |
| printf("\n"); |
| } |
| |
| void dump_mc_ccsr_regs(struct mc_ccsr_registers __iomem *mc_ccsr_regs) |
| { |
| printf("MC CCSR registers:\n" |
| "reg_gcr1 %#x\n" |
| "reg_gsr %#x\n" |
| "reg_sicbalr %#x\n" |
| "reg_sicbahr %#x\n" |
| "reg_sicapr %#x\n" |
| "reg_mcfbalr %#x\n" |
| "reg_mcfbahr %#x\n" |
| "reg_mcfapr %#x\n" |
| "reg_psr %#x\n", |
| mc_ccsr_regs->reg_gcr1, |
| mc_ccsr_regs->reg_gsr, |
| mc_ccsr_regs->reg_sicbalr, |
| mc_ccsr_regs->reg_sicbahr, |
| mc_ccsr_regs->reg_sicapr, |
| mc_ccsr_regs->reg_mcfbalr, |
| mc_ccsr_regs->reg_mcfbahr, |
| mc_ccsr_regs->reg_mcfapr, |
| mc_ccsr_regs->reg_psr); |
| } |
| #else |
| |
| #define dump_ram_words(title, addr) |
| #define dump_mc_ccsr_regs(mc_ccsr_regs) |
| |
| #endif /* DEBUG */ |
| |
| #ifndef CONFIG_SYS_LS_MC_FW_IN_DDR |
| /** |
| * Copying MC firmware or DPL image to DDR |
| */ |
| static int mc_copy_image(const char *title, |
| u64 image_addr, u32 image_size, u64 mc_ram_addr) |
| { |
| debug("%s copied to address %p\n", title, (void *)mc_ram_addr); |
| memcpy((void *)mc_ram_addr, (void *)image_addr, image_size); |
| flush_dcache_range(mc_ram_addr, mc_ram_addr + image_size); |
| return 0; |
| } |
| |
| /** |
| * MC firmware FIT image parser checks if the image is in FIT |
| * format, verifies integrity of the image and calculates |
| * raw image address and size values. |
| * Returns 0 on success and a negative errno on error. |
| * task fail. |
| **/ |
| int parse_mc_firmware_fit_image(const void **raw_image_addr, |
| size_t *raw_image_size) |
| { |
| int format; |
| void *fit_hdr; |
| int node_offset; |
| const void *data; |
| size_t size; |
| const char *uname = "firmware"; |
| |
| /* Check if the image is in NOR flash */ |
| #ifdef CONFIG_SYS_LS_MC_FW_IN_NOR |
| fit_hdr = (void *)CONFIG_SYS_LS_MC_FW_ADDR; |
| #else |
| #error "No CONFIG_SYS_LS_MC_FW_IN_xxx defined" |
| #endif |
| |
| /* Check if Image is in FIT format */ |
| format = genimg_get_format(fit_hdr); |
| |
| if (format != IMAGE_FORMAT_FIT) { |
| printf("fsl-mc: ERROR: Bad firmware image (not a FIT image)\n"); |
| return -EINVAL; |
| } |
| |
| if (!fit_check_format(fit_hdr)) { |
| printf("fsl-mc: ERROR: Bad firmware image (bad FIT header)\n"); |
| return -EINVAL; |
| } |
| |
| node_offset = fit_image_get_node(fit_hdr, uname); |
| |
| if (node_offset < 0) { |
| printf("fsl-mc: ERROR: Bad firmware image (missing subimage)\n"); |
| return -ENOENT; |
| } |
| |
| /* Verify MC firmware image */ |
| if (!(fit_image_verify(fit_hdr, node_offset))) { |
| printf("fsl-mc: ERROR: Bad firmware image (bad CRC)\n"); |
| return -EINVAL; |
| } |
| |
| /* Get address and size of raw image */ |
| fit_image_get_data(fit_hdr, node_offset, &data, &size); |
| |
| *raw_image_addr = data; |
| *raw_image_size = size; |
| |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Calculates the values to be used to specify the address range |
| * for the MC private DRAM block, in the MCFBALR/MCFBAHR registers. |
| * It returns the highest 512MB-aligned address within the given |
| * address range, in '*aligned_base_addr', and the number of 256 MiB |
| * blocks in it, in 'num_256mb_blocks'. |
| */ |
| static int calculate_mc_private_ram_params(u64 mc_private_ram_start_addr, |
| size_t mc_ram_size, |
| u64 *aligned_base_addr, |
| u8 *num_256mb_blocks) |
| { |
| u64 addr; |
| u16 num_blocks; |
| |
| if (mc_ram_size % MC_RAM_SIZE_ALIGNMENT != 0) { |
| printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n", |
| mc_ram_size); |
| return -EINVAL; |
| } |
| |
| num_blocks = mc_ram_size / MC_RAM_SIZE_ALIGNMENT; |
| if (num_blocks < 1 || num_blocks > 0xff) { |
| printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n", |
| mc_ram_size); |
| return -EINVAL; |
| } |
| |
| addr = (mc_private_ram_start_addr + mc_ram_size - 1) & |
| MC_RAM_BASE_ADDR_ALIGNMENT_MASK; |
| |
| if (addr < mc_private_ram_start_addr) { |
| printf("fsl-mc: ERROR: bad start address %#llx\n", |
| mc_private_ram_start_addr); |
| return -EFAULT; |
| } |
| |
| *aligned_base_addr = addr; |
| *num_256mb_blocks = num_blocks; |
| return 0; |
| } |
| |
| static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size) |
| { |
| u64 mc_dpc_offset; |
| #ifndef CONFIG_SYS_LS_MC_DPC_IN_DDR |
| int error; |
| void *dpc_fdt_hdr; |
| int dpc_size; |
| #endif |
| |
| #ifdef CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET |
| BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET & 0x3) != 0 || |
| CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET > 0xffffffff); |
| |
| mc_dpc_offset = CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET; |
| #else |
| #error "CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET not defined" |
| #endif |
| |
| /* |
| * Load the MC DPC blob in the MC private DRAM block: |
| */ |
| #ifdef CONFIG_SYS_LS_MC_DPC_IN_DDR |
| printf("MC DPC is preloaded to %#llx\n", mc_ram_addr + mc_dpc_offset); |
| #else |
| /* |
| * Get address and size of the DPC blob stored in flash: |
| */ |
| #ifdef CONFIG_SYS_LS_MC_DPC_IN_NOR |
| dpc_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPC_ADDR; |
| #else |
| #error "No CONFIG_SYS_LS_MC_DPC_IN_xxx defined" |
| #endif |
| |
| error = fdt_check_header(dpc_fdt_hdr); |
| if (error != 0) { |
| /* |
| * Don't return with error here, since the MC firmware can |
| * still boot without a DPC |
| */ |
| printf("fsl-mc: WARNING: No DPC image found\n"); |
| return 0; |
| } |
| |
| dpc_size = fdt_totalsize(dpc_fdt_hdr); |
| if (dpc_size > CONFIG_SYS_LS_MC_DPC_MAX_LENGTH) { |
| printf("fsl-mc: ERROR: Bad DPC image (too large: %d)\n", |
| dpc_size); |
| return -EINVAL; |
| } |
| |
| mc_copy_image("MC DPC blob", |
| (u64)dpc_fdt_hdr, dpc_size, mc_ram_addr + mc_dpc_offset); |
| #endif /* not defined CONFIG_SYS_LS_MC_DPC_IN_DDR */ |
| |
| dump_ram_words("DPC", (void *)(mc_ram_addr + mc_dpc_offset)); |
| return 0; |
| } |
| |
| static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size) |
| { |
| u64 mc_dpl_offset; |
| #ifndef CONFIG_SYS_LS_MC_DPL_IN_DDR |
| int error; |
| void *dpl_fdt_hdr; |
| int dpl_size; |
| #endif |
| |
| #ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET |
| BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || |
| CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); |
| |
| mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; |
| #else |
| #error "CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET not defined" |
| #endif |
| |
| /* |
| * Load the MC DPL blob in the MC private DRAM block: |
| */ |
| #ifdef CONFIG_SYS_LS_MC_DPL_IN_DDR |
| printf("MC DPL is preloaded to %#llx\n", mc_ram_addr + mc_dpl_offset); |
| #else |
| /* |
| * Get address and size of the DPL blob stored in flash: |
| */ |
| #ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR |
| dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; |
| #else |
| #error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" |
| #endif |
| |
| error = fdt_check_header(dpl_fdt_hdr); |
| if (error != 0) { |
| printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); |
| return error; |
| } |
| |
| dpl_size = fdt_totalsize(dpl_fdt_hdr); |
| if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { |
| printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", |
| dpl_size); |
| return -EINVAL; |
| } |
| |
| mc_copy_image("MC DPL blob", |
| (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset); |
| #endif /* not defined CONFIG_SYS_LS_MC_DPL_IN_DDR */ |
| |
| dump_ram_words("DPL", (void *)(mc_ram_addr + mc_dpl_offset)); |
| return 0; |
| } |
| |
| /** |
| * Return the MC boot timeout value in milliseconds |
| */ |
| static unsigned long get_mc_boot_timeout_ms(void) |
| { |
| unsigned long timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; |
| |
| char *timeout_ms_env_var = getenv(MC_BOOT_TIMEOUT_ENV_VAR); |
| |
| if (timeout_ms_env_var) { |
| timeout_ms = simple_strtoul(timeout_ms_env_var, NULL, 10); |
| if (timeout_ms == 0) { |
| printf("fsl-mc: WARNING: Invalid value for \'" |
| MC_BOOT_TIMEOUT_ENV_VAR |
| "\' environment variable: %lu\n", |
| timeout_ms); |
| |
| timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; |
| } |
| } |
| |
| return timeout_ms; |
| } |
| |
| static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr) |
| { |
| u32 reg_gsr; |
| u32 mc_fw_boot_status; |
| unsigned long timeout_ms = get_mc_boot_timeout_ms(); |
| struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR; |
| |
| dmb(); |
| debug("Polling mc_ccsr_regs->reg_gsr ...\n"); |
| assert(timeout_ms > 0); |
| for (;;) { |
| udelay(1000); /* throttle polling */ |
| reg_gsr = in_le32(&mc_ccsr_regs->reg_gsr); |
| mc_fw_boot_status = (reg_gsr & GSR_FS_MASK); |
| if (mc_fw_boot_status & 0x1) |
| break; |
| |
| timeout_ms--; |
| if (timeout_ms == 0) |
| break; |
| } |
| |
| if (timeout_ms == 0) { |
| if (booting_mc) |
| printf("fsl-mc: timeout booting management complex firmware\n"); |
| else |
| printf("fsl-mc: timeout deploying data path layout\n"); |
| |
| /* TODO: Get an error status from an MC CCSR register */ |
| return -ETIMEDOUT; |
| } |
| |
| if (mc_fw_boot_status != 0x1) { |
| /* |
| * TODO: Identify critical errors from the GSR register's FS |
| * field and for those errors, set error to -ENODEV or other |
| * appropriate errno, so that the status property is set to |
| * failure in the fsl,dprc device tree node. |
| */ |
| if (booting_mc) { |
| printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", |
| reg_gsr); |
| } else { |
| printf("fsl-mc: WARNING: Data path layout deployed with error (GSR: %#x)\n", |
| reg_gsr); |
| } |
| } |
| |
| *final_reg_gsr = reg_gsr; |
| return 0; |
| } |
| |
| int mc_init(void) |
| { |
| int error = 0; |
| int portal_id = 0; |
| struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR; |
| u64 mc_ram_addr; |
| u32 reg_gsr; |
| u32 reg_mcfbalr; |
| #ifndef CONFIG_SYS_LS_MC_FW_IN_DDR |
| const void *raw_image_addr; |
| size_t raw_image_size = 0; |
| #endif |
| struct mc_version mc_ver_info; |
| u64 mc_ram_aligned_base_addr; |
| u8 mc_ram_num_256mb_blocks; |
| size_t mc_ram_size = mc_get_dram_block_size(); |
| |
| /* |
| * The MC private DRAM block was already carved at the end of DRAM |
| * by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE: |
| */ |
| if (gd->bd->bi_dram[1].start) { |
| mc_ram_addr = |
| gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size; |
| } else { |
| mc_ram_addr = |
| gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; |
| } |
| |
| #ifdef CONFIG_FSL_DEBUG_SERVER |
| /* |
| * FIXME: I don't think this is right. See get_dram_size_to_hide() |
| */ |
| mc_ram_addr -= debug_server_get_dram_block_size(); |
| #endif |
| |
| error = calculate_mc_private_ram_params(mc_ram_addr, |
| mc_ram_size, |
| &mc_ram_aligned_base_addr, |
| &mc_ram_num_256mb_blocks); |
| if (error != 0) |
| goto out; |
| |
| /* |
| * Management Complex cores should be held at reset out of POR. |
| * U-boot should be the first software to touch MC. To be safe, |
| * we reset all cores again by setting GCR1 to 0. It doesn't do |
| * anything if they are held at reset. After we setup the firmware |
| * we kick off MC by deasserting the reset bit for core 0, and |
| * deasserting the reset bits for Command Portal Managers. |
| * The stop bits are not touched here. They are used to stop the |
| * cores when they are active. Setting stop bits doesn't stop the |
| * cores from fetching instructions when they are released from |
| * reset. |
| */ |
| out_le32(&mc_ccsr_regs->reg_gcr1, 0); |
| dmb(); |
| |
| #ifdef CONFIG_SYS_LS_MC_FW_IN_DDR |
| printf("MC firmware is preloaded to %#llx\n", mc_ram_addr); |
| #else |
| error = parse_mc_firmware_fit_image(&raw_image_addr, &raw_image_size); |
| if (error != 0) |
| goto out; |
| /* |
| * Load the MC FW at the beginning of the MC private DRAM block: |
| */ |
| mc_copy_image("MC Firmware", |
| (u64)raw_image_addr, raw_image_size, mc_ram_addr); |
| #endif |
| dump_ram_words("firmware", (void *)mc_ram_addr); |
| |
| error = load_mc_dpc(mc_ram_addr, mc_ram_size); |
| if (error != 0) |
| goto out; |
| |
| error = load_mc_dpl(mc_ram_addr, mc_ram_size); |
| if (error != 0) |
| goto out; |
| |
| debug("mc_ccsr_regs %p\n", mc_ccsr_regs); |
| dump_mc_ccsr_regs(mc_ccsr_regs); |
| |
| /* |
| * Tell MC what is the address range of the DRAM block assigned to it: |
| */ |
| reg_mcfbalr = (u32)mc_ram_aligned_base_addr | |
| (mc_ram_num_256mb_blocks - 1); |
| out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr); |
| out_le32(&mc_ccsr_regs->reg_mcfbahr, |
| (u32)(mc_ram_aligned_base_addr >> 32)); |
| out_le32(&mc_ccsr_regs->reg_mcfapr, MCFAPR_BYPASS_ICID_MASK); |
| |
| /* |
| * Tell the MC that we want delayed DPL deployment. |
| */ |
| out_le32(&mc_ccsr_regs->reg_gsr, 0xDD00); |
| |
| printf("\nfsl-mc: Booting Management Complex ...\n"); |
| |
| /* |
| * Deassert reset and release MC core 0 to run |
| */ |
| out_le32(&mc_ccsr_regs->reg_gcr1, GCR1_P1_DE_RST | GCR1_M_ALL_DE_RST); |
| error = wait_for_mc(true, ®_gsr); |
| if (error != 0) |
| goto out; |
| |
| /* |
| * TODO: need to obtain the portal_id for the root container from the |
| * DPL |
| */ |
| portal_id = 0; |
| |
| /* |
| * Initialize the global default MC portal |
| * And check that the MC firmware is responding portal commands: |
| */ |
| dflt_mc_io = (struct fsl_mc_io *)malloc(sizeof(struct fsl_mc_io)); |
| if (!dflt_mc_io) { |
| printf(" No memory: malloc() failed\n"); |
| return -ENOMEM; |
| } |
| |
| dflt_mc_io->mmio_regs = SOC_MC_PORTAL_ADDR(portal_id); |
| debug("Checking access to MC portal of root DPRC container (portal_id %d, portal physical addr %p)\n", |
| portal_id, dflt_mc_io->mmio_regs); |
| |
| error = mc_get_version(dflt_mc_io, &mc_ver_info); |
| if (error != 0) { |
| printf("fsl-mc: ERROR: Firmware version check failed (error: %d)\n", |
| error); |
| goto out; |
| } |
| |
| if (MC_VER_MAJOR != mc_ver_info.major) |
| printf("fsl-mc: ERROR: Firmware major version mismatch (found: %d, expected: %d)\n", |
| mc_ver_info.major, MC_VER_MAJOR); |
| |
| if (MC_VER_MINOR != mc_ver_info.minor) |
| printf("fsl-mc: WARNING: Firmware minor version mismatch (found: %d, expected: %d)\n", |
| mc_ver_info.minor, MC_VER_MINOR); |
| |
| printf("fsl-mc: Management Complex booted (version: %d.%d.%d, boot status: %#x)\n", |
| mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision, |
| reg_gsr & GSR_FS_MASK); |
| |
| /* |
| * Tell the MC to deploy the DPL: |
| */ |
| out_le32(&mc_ccsr_regs->reg_gsr, 0x0); |
| printf("\nfsl-mc: Deploying data path layout ...\n"); |
| error = wait_for_mc(false, ®_gsr); |
| if (error != 0) |
| goto out; |
| out: |
| if (error != 0) |
| mc_boot_status = -error; |
| else |
| mc_boot_status = 0; |
| |
| return error; |
| } |
| |
| int get_mc_boot_status(void) |
| { |
| return mc_boot_status; |
| } |
| |
| /** |
| * Return the actual size of the MC private DRAM block. |
| */ |
| unsigned long mc_get_dram_block_size(void) |
| { |
| unsigned long dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; |
| |
| char *dram_block_size_env_var = getenv(MC_MEM_SIZE_ENV_VAR); |
| |
| if (dram_block_size_env_var) { |
| dram_block_size = simple_strtoul(dram_block_size_env_var, NULL, |
| 10); |
| |
| if (dram_block_size < CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE) { |
| printf("fsl-mc: WARNING: Invalid value for \'" |
| MC_MEM_SIZE_ENV_VAR |
| "\' environment variable: %lu\n", |
| dram_block_size); |
| |
| dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; |
| } |
| } |
| |
| return dram_block_size; |
| } |
| |
| int dpio_init(struct dprc_obj_desc obj_desc) |
| { |
| struct qbman_swp_desc p_des; |
| struct dpio_attr attr; |
| int err = 0; |
| |
| dflt_dpio = (struct fsl_dpio_obj *)malloc(sizeof(struct fsl_dpio_obj)); |
| if (!dflt_dpio) { |
| printf(" No memory: malloc() failed\n"); |
| return -ENOMEM; |
| } |
| |
| dflt_dpio->dpio_id = obj_desc.id; |
| |
| err = dpio_open(dflt_mc_io, obj_desc.id, &dflt_dpio_handle); |
| if (err) { |
| printf("dpio_open() failed\n"); |
| goto err_open; |
| } |
| |
| err = dpio_get_attributes(dflt_mc_io, dflt_dpio_handle, &attr); |
| if (err) { |
| printf("dpio_get_attributes() failed %d\n", err); |
| goto err_get_attr; |
| } |
| |
| err = dpio_enable(dflt_mc_io, dflt_dpio_handle); |
| if (err) { |
| printf("dpio_enable() failed %d\n", err); |
| goto err_get_enable; |
| } |
| debug("ce_paddr=0x%llx, ci_paddr=0x%llx, portalid=%d, prios=%d\n", |
| attr.qbman_portal_ce_paddr, |
| attr.qbman_portal_ci_paddr, |
| attr.qbman_portal_id, |
| attr.num_priorities); |
| |
| p_des.cena_bar = (void *)attr.qbman_portal_ce_paddr; |
| p_des.cinh_bar = (void *)attr.qbman_portal_ci_paddr; |
| |
| dflt_dpio->sw_portal = qbman_swp_init(&p_des); |
| if (dflt_dpio->sw_portal == NULL) { |
| printf("qbman_swp_init() failed\n"); |
| goto err_get_swp_init; |
| } |
| return 0; |
| |
| err_get_swp_init: |
| err_get_enable: |
| dpio_disable(dflt_mc_io, dflt_dpio_handle); |
| err_get_attr: |
| dpio_close(dflt_mc_io, dflt_dpio_handle); |
| err_open: |
| free(dflt_dpio); |
| return err; |
| } |
| |
| int dpbp_init(struct dprc_obj_desc obj_desc) |
| { |
| dflt_dpbp = (struct fsl_dpbp_obj *)malloc(sizeof(struct fsl_dpbp_obj)); |
| if (!dflt_dpbp) { |
| printf(" No memory: malloc() failed\n"); |
| return -ENOMEM; |
| } |
| dflt_dpbp->dpbp_attr.id = obj_desc.id; |
| |
| return 0; |
| } |
| |
| int dprc_init_container_obj(struct dprc_obj_desc obj_desc, uint16_t dprc_handle) |
| { |
| int error = 0, state = 0; |
| struct dprc_endpoint dpni_endpoint, dpmac_endpoint; |
| if (!strcmp(obj_desc.type, "dpbp")) { |
| if (!dflt_dpbp) { |
| error = dpbp_init(obj_desc); |
| if (error < 0) |
| printf("dpbp_init failed\n"); |
| } |
| } else if (!strcmp(obj_desc.type, "dpio")) { |
| if (!dflt_dpio) { |
| error = dpio_init(obj_desc); |
| if (error < 0) |
| printf("dpio_init failed\n"); |
| } |
| } else if (!strcmp(obj_desc.type, "dpni")) { |
| strcpy(dpni_endpoint.type, obj_desc.type); |
| dpni_endpoint.id = obj_desc.id; |
| error = dprc_get_connection(dflt_mc_io, dprc_handle, |
| &dpni_endpoint, &dpmac_endpoint, &state); |
| if (!strcmp(dpmac_endpoint.type, "dpmac")) |
| error = ldpaa_eth_init(obj_desc); |
| if (error < 0) |
| printf("ldpaa_eth_init failed\n"); |
| } |
| |
| return error; |
| } |
| |
| int dprc_scan_container_obj(uint16_t dprc_handle, char *obj_type, int i) |
| { |
| int error = 0; |
| struct dprc_obj_desc obj_desc; |
| |
| memset((void *)&obj_desc, 0x00, sizeof(struct dprc_obj_desc)); |
| |
| error = dprc_get_obj(dflt_mc_io, dprc_handle, |
| i, &obj_desc); |
| if (error < 0) { |
| printf("dprc_get_obj(i=%d) failed: %d\n", |
| i, error); |
| return error; |
| } |
| |
| if (!strcmp(obj_desc.type, obj_type)) { |
| debug("Discovered object: type %s, id %d, req %s\n", |
| obj_desc.type, obj_desc.id, obj_type); |
| |
| error = dprc_init_container_obj(obj_desc, dprc_handle); |
| if (error < 0) { |
| printf("dprc_init_container_obj(i=%d) failed: %d\n", |
| i, error); |
| return error; |
| } |
| } |
| |
| return error; |
| } |
| |
| int fsl_mc_ldpaa_init(bd_t *bis) |
| { |
| int i, error = 0; |
| int dprc_opened = 0, container_id; |
| int num_child_objects = 0; |
| |
| error = mc_init(); |
| if (error < 0) |
| goto error; |
| |
| error = dprc_get_container_id(dflt_mc_io, &container_id); |
| if (error < 0) { |
| printf("dprc_get_container_id() failed: %d\n", error); |
| goto error; |
| } |
| |
| debug("fsl-mc: Container id=0x%x\n", container_id); |
| |
| error = dprc_open(dflt_mc_io, container_id, &dflt_dprc_handle); |
| if (error < 0) { |
| printf("dprc_open() failed: %d\n", error); |
| goto error; |
| } |
| dprc_opened = true; |
| |
| error = dprc_get_obj_count(dflt_mc_io, |
| dflt_dprc_handle, |
| &num_child_objects); |
| if (error < 0) { |
| printf("dprc_get_obj_count() failed: %d\n", error); |
| goto error; |
| } |
| debug("Total child in container %d = %d\n", container_id, |
| num_child_objects); |
| |
| if (num_child_objects != 0) { |
| /* |
| * Discover objects currently in the DPRC container in the MC: |
| */ |
| for (i = 0; i < num_child_objects; i++) |
| error = dprc_scan_container_obj(dflt_dprc_handle, |
| "dpbp", i); |
| |
| for (i = 0; i < num_child_objects; i++) |
| error = dprc_scan_container_obj(dflt_dprc_handle, |
| "dpio", i); |
| |
| for (i = 0; i < num_child_objects; i++) |
| error = dprc_scan_container_obj(dflt_dprc_handle, |
| "dpni", i); |
| } |
| error: |
| if (dprc_opened) |
| dprc_close(dflt_mc_io, dflt_dprc_handle); |
| |
| return error; |
| } |
| |
| void fsl_mc_ldpaa_exit(bd_t *bis) |
| { |
| int err; |
| |
| if (get_mc_boot_status() == 0) { |
| err = dpio_disable(dflt_mc_io, dflt_dpio_handle); |
| if (err < 0) { |
| printf("dpio_disable() failed: %d\n", err); |
| return; |
| } |
| err = dpio_reset(dflt_mc_io, dflt_dpio_handle); |
| if (err < 0) { |
| printf("dpio_reset() failed: %d\n", err); |
| return; |
| } |
| err = dpio_close(dflt_mc_io, dflt_dpio_handle); |
| if (err < 0) { |
| printf("dpio_close() failed: %d\n", err); |
| return; |
| } |
| |
| free(dflt_dpio); |
| free(dflt_dpbp); |
| } |
| |
| if (dflt_mc_io) |
| free(dflt_mc_io); |
| } |