| /* |
| * Faraday USB 2.0 OTG Controller |
| * |
| * (C) Copyright 2010 Faraday Technology |
| * Dante Su <dantesu@faraday-tech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <config.h> |
| #include <net.h> |
| #include <malloc.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include <linux/types.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| |
| #include <usb/fotg210.h> |
| |
| #define CFG_NUM_ENDPOINTS 4 |
| #define CFG_EP0_MAX_PACKET_SIZE 64 |
| #define CFG_EPX_MAX_PACKET_SIZE 512 |
| |
| #define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 2) /* 250 ms */ |
| |
| struct fotg210_chip; |
| |
| struct fotg210_ep { |
| struct usb_ep ep; |
| |
| uint maxpacket; |
| uint id; |
| uint stopped; |
| |
| struct list_head queue; |
| struct fotg210_chip *chip; |
| const struct usb_endpoint_descriptor *desc; |
| }; |
| |
| struct fotg210_request { |
| struct usb_request req; |
| struct list_head queue; |
| struct fotg210_ep *ep; |
| }; |
| |
| struct fotg210_chip { |
| struct usb_gadget gadget; |
| struct usb_gadget_driver *driver; |
| struct fotg210_regs *regs; |
| uint8_t irq; |
| uint16_t addr; |
| int pullup; |
| enum usb_device_state state; |
| struct fotg210_ep ep[1 + CFG_NUM_ENDPOINTS]; |
| }; |
| |
| static struct usb_endpoint_descriptor ep0_desc = { |
| .bLength = sizeof(struct usb_endpoint_descriptor), |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| }; |
| |
| static inline int fifo_to_ep(struct fotg210_chip *chip, int id, int in) |
| { |
| return (id < 0) ? 0 : ((id & 0x03) + 1); |
| } |
| |
| static inline int ep_to_fifo(struct fotg210_chip *chip, int id) |
| { |
| return (id <= 0) ? -1 : ((id - 1) & 0x03); |
| } |
| |
| static inline int ep_reset(struct fotg210_chip *chip, uint8_t ep_addr) |
| { |
| int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK; |
| struct fotg210_regs *regs = chip->regs; |
| |
| if (ep_addr & USB_DIR_IN) { |
| /* reset endpoint */ |
| setbits_le32(®s->iep[ep - 1], IEP_RESET); |
| mdelay(1); |
| clrbits_le32(®s->iep[ep - 1], IEP_RESET); |
| /* clear endpoint stall */ |
| clrbits_le32(®s->iep[ep - 1], IEP_STALL); |
| } else { |
| /* reset endpoint */ |
| setbits_le32(®s->oep[ep - 1], OEP_RESET); |
| mdelay(1); |
| clrbits_le32(®s->oep[ep - 1], OEP_RESET); |
| /* clear endpoint stall */ |
| clrbits_le32(®s->oep[ep - 1], OEP_STALL); |
| } |
| |
| return 0; |
| } |
| |
| static int fotg210_reset(struct fotg210_chip *chip) |
| { |
| struct fotg210_regs *regs = chip->regs; |
| uint32_t i; |
| |
| chip->state = USB_STATE_POWERED; |
| |
| /* chip enable */ |
| writel(DEVCTRL_EN, ®s->dev_ctrl); |
| |
| /* device address reset */ |
| chip->addr = 0; |
| writel(0, ®s->dev_addr); |
| |
| /* set idle counter to 7ms */ |
| writel(7, ®s->idle); |
| |
| /* disable all interrupts */ |
| writel(IMR_MASK, ®s->imr); |
| writel(GIMR_MASK, ®s->gimr); |
| writel(GIMR0_MASK, ®s->gimr0); |
| writel(GIMR1_MASK, ®s->gimr1); |
| writel(GIMR2_MASK, ®s->gimr2); |
| |
| /* clear interrupts */ |
| writel(ISR_MASK, ®s->isr); |
| writel(0, ®s->gisr); |
| writel(0, ®s->gisr0); |
| writel(0, ®s->gisr1); |
| writel(0, ®s->gisr2); |
| |
| /* chip reset */ |
| setbits_le32(®s->dev_ctrl, DEVCTRL_RESET); |
| mdelay(10); |
| if (readl(®s->dev_ctrl) & DEVCTRL_RESET) { |
| printf("fotg210: chip reset failed\n"); |
| return -1; |
| } |
| |
| /* CX FIFO reset */ |
| setbits_le32(®s->cxfifo, CXFIFO_CXFIFOCLR); |
| mdelay(10); |
| if (readl(®s->cxfifo) & CXFIFO_CXFIFOCLR) { |
| printf("fotg210: ep0 fifo reset failed\n"); |
| return -1; |
| } |
| |
| /* create static ep-fifo map (EP1 <-> FIFO0, EP2 <-> FIFO1 ...) */ |
| writel(EPMAP14_DEFAULT, ®s->epmap14); |
| writel(EPMAP58_DEFAULT, ®s->epmap58); |
| writel(FIFOMAP_DEFAULT, ®s->fifomap); |
| writel(0, ®s->fifocfg); |
| for (i = 0; i < 8; ++i) { |
| writel(CFG_EPX_MAX_PACKET_SIZE, ®s->iep[i]); |
| writel(CFG_EPX_MAX_PACKET_SIZE, ®s->oep[i]); |
| } |
| |
| /* FIFO reset */ |
| for (i = 0; i < 4; ++i) { |
| writel(FIFOCSR_RESET, ®s->fifocsr[i]); |
| mdelay(10); |
| if (readl(®s->fifocsr[i]) & FIFOCSR_RESET) { |
| printf("fotg210: fifo%d reset failed\n", i); |
| return -1; |
| } |
| } |
| |
| /* enable only device interrupt and triggered at level-high */ |
| writel(IMR_IRQLH | IMR_HOST | IMR_OTG, ®s->imr); |
| writel(ISR_MASK, ®s->isr); |
| /* disable EP0 IN/OUT interrupt */ |
| writel(GIMR0_CXOUT | GIMR0_CXIN, ®s->gimr0); |
| /* disable EPX IN+SPK+OUT interrupts */ |
| writel(GIMR1_MASK, ®s->gimr1); |
| /* disable wakeup+idle+dma+zlp interrupts */ |
| writel(GIMR2_WAKEUP | GIMR2_IDLE | GIMR2_DMAERR | GIMR2_DMAFIN |
| | GIMR2_ZLPRX | GIMR2_ZLPTX, ®s->gimr2); |
| /* enable all group interrupt */ |
| writel(0, ®s->gimr); |
| |
| /* suspend delay = 3 ms */ |
| writel(3, ®s->idle); |
| |
| /* turn-on device interrupts */ |
| setbits_le32(®s->dev_ctrl, DEVCTRL_GIRQ_EN); |
| |
| return 0; |
| } |
| |
| static inline int fotg210_cxwait(struct fotg210_chip *chip, uint32_t mask) |
| { |
| struct fotg210_regs *regs = chip->regs; |
| int ret = -1; |
| ulong ts; |
| |
| for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { |
| if ((readl(®s->cxfifo) & mask) != mask) |
| continue; |
| ret = 0; |
| break; |
| } |
| |
| if (ret) |
| printf("fotg210: cx/ep0 timeout\n"); |
| |
| return ret; |
| } |
| |
| static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req) |
| { |
| struct fotg210_chip *chip = ep->chip; |
| struct fotg210_regs *regs = chip->regs; |
| uint32_t tmp, ts; |
| uint8_t *buf = req->req.buf + req->req.actual; |
| uint32_t len = req->req.length - req->req.actual; |
| int fifo = ep_to_fifo(chip, ep->id); |
| int ret = -EBUSY; |
| |
| /* 1. init dma buffer */ |
| if (len > ep->maxpacket) |
| len = ep->maxpacket; |
| |
| /* 2. wait for dma ready (hardware) */ |
| for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { |
| if (!(readl(®s->dma_ctrl) & DMACTRL_START)) { |
| ret = 0; |
| break; |
| } |
| } |
| if (ret) { |
| printf("fotg210: dma busy\n"); |
| req->req.status = ret; |
| return ret; |
| } |
| |
| /* 3. DMA target setup */ |
| if (ep->desc->bEndpointAddress & USB_DIR_IN) |
| flush_dcache_range((ulong)buf, (ulong)buf + len); |
| else |
| invalidate_dcache_range((ulong)buf, (ulong)buf + len); |
| |
| writel(virt_to_phys(buf), ®s->dma_addr); |
| |
| if (ep->desc->bEndpointAddress & USB_DIR_IN) { |
| if (ep->id == 0) { |
| /* Wait until cx/ep0 fifo empty */ |
| fotg210_cxwait(chip, CXFIFO_CXFIFOE); |
| udelay(1); |
| writel(DMAFIFO_CX, ®s->dma_fifo); |
| } else { |
| /* Wait until epx fifo empty */ |
| fotg210_cxwait(chip, CXFIFO_FIFOE(fifo)); |
| writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo); |
| } |
| writel(DMACTRL_LEN(len) | DMACTRL_MEM2FIFO, ®s->dma_ctrl); |
| } else { |
| uint32_t blen; |
| |
| if (ep->id == 0) { |
| writel(DMAFIFO_CX, ®s->dma_fifo); |
| do { |
| blen = CXFIFO_BYTES(readl(®s->cxfifo)); |
| } while (blen < len); |
| } else { |
| writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo); |
| blen = FIFOCSR_BYTES(readl(®s->fifocsr[fifo])); |
| } |
| len = (len < blen) ? len : blen; |
| writel(DMACTRL_LEN(len) | DMACTRL_FIFO2MEM, ®s->dma_ctrl); |
| } |
| |
| /* 4. DMA start */ |
| setbits_le32(®s->dma_ctrl, DMACTRL_START); |
| |
| /* 5. DMA wait */ |
| ret = -EBUSY; |
| for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { |
| tmp = readl(®s->gisr2); |
| /* DMA complete */ |
| if (tmp & GISR2_DMAFIN) { |
| ret = 0; |
| break; |
| } |
| /* DMA error */ |
| if (tmp & GISR2_DMAERR) { |
| printf("fotg210: dma error\n"); |
| break; |
| } |
| /* resume, suspend, reset */ |
| if (tmp & (GISR2_RESUME | GISR2_SUSPEND | GISR2_RESET)) { |
| printf("fotg210: dma reset by host\n"); |
| break; |
| } |
| } |
| |
| /* 7. DMA target reset */ |
| if (ret) |
| writel(DMACTRL_ABORT | DMACTRL_CLRFF, ®s->dma_ctrl); |
| |
| writel(0, ®s->gisr2); |
| writel(0, ®s->dma_fifo); |
| |
| req->req.status = ret; |
| if (!ret) |
| req->req.actual += len; |
| else |
| printf("fotg210: ep%d dma error(code=%d)\n", ep->id, ret); |
| |
| return len; |
| } |
| |
| /* |
| * result of setup packet |
| */ |
| #define CX_IDLE 0 |
| #define CX_FINISH 1 |
| #define CX_STALL 2 |
| |
| static void fotg210_setup(struct fotg210_chip *chip) |
| { |
| int id, ret = CX_IDLE; |
| uint32_t tmp[2]; |
| struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp; |
| struct fotg210_regs *regs = chip->regs; |
| |
| /* |
| * If this is the first Cx 8 byte command, |
| * we can now query USB mode (high/full speed; USB 2.0/USB 1.0) |
| */ |
| if (chip->state == USB_STATE_POWERED) { |
| chip->state = USB_STATE_DEFAULT; |
| if (readl(®s->otgcsr) & OTGCSR_DEV_B) { |
| /* Mini-B */ |
| if (readl(®s->dev_ctrl) & DEVCTRL_HS) { |
| puts("fotg210: HS\n"); |
| chip->gadget.speed = USB_SPEED_HIGH; |
| /* SOF mask timer = 1100 ticks */ |
| writel(SOFMTR_TMR(1100), ®s->sof_mtr); |
| } else { |
| puts("fotg210: FS\n"); |
| chip->gadget.speed = USB_SPEED_FULL; |
| /* SOF mask timer = 10000 ticks */ |
| writel(SOFMTR_TMR(10000), ®s->sof_mtr); |
| } |
| } else { |
| printf("fotg210: mini-A?\n"); |
| } |
| } |
| |
| /* switch data port to ep0 */ |
| writel(DMAFIFO_CX, ®s->dma_fifo); |
| /* fetch 8 bytes setup packet */ |
| tmp[0] = readl(®s->ep0_data); |
| tmp[1] = readl(®s->ep0_data); |
| /* release data port */ |
| writel(0, ®s->dma_fifo); |
| |
| if (req->bRequestType & USB_DIR_IN) |
| ep0_desc.bEndpointAddress = USB_DIR_IN; |
| else |
| ep0_desc.bEndpointAddress = USB_DIR_OUT; |
| |
| ret = CX_IDLE; |
| |
| if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { |
| switch (req->bRequest) { |
| case USB_REQ_SET_CONFIGURATION: |
| debug("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF); |
| if (!(req->wValue & 0x00FF)) { |
| chip->state = USB_STATE_ADDRESS; |
| writel(chip->addr, ®s->dev_addr); |
| } else { |
| chip->state = USB_STATE_CONFIGURED; |
| writel(chip->addr | DEVADDR_CONF, |
| ®s->dev_addr); |
| } |
| ret = CX_IDLE; |
| break; |
| |
| case USB_REQ_SET_ADDRESS: |
| debug("fotg210: set_addr(0x%04X)\n", req->wValue); |
| chip->state = USB_STATE_ADDRESS; |
| chip->addr = req->wValue & DEVADDR_ADDR_MASK; |
| ret = CX_FINISH; |
| writel(chip->addr, ®s->dev_addr); |
| break; |
| |
| case USB_REQ_CLEAR_FEATURE: |
| debug("fotg210: clr_feature(%d, %d)\n", |
| req->bRequestType & 0x03, req->wValue); |
| switch (req->wValue) { |
| case 0: /* [Endpoint] halt */ |
| ep_reset(chip, req->wIndex); |
| ret = CX_FINISH; |
| break; |
| case 1: /* [Device] remote wake-up */ |
| case 2: /* [Device] test mode */ |
| default: |
| ret = CX_STALL; |
| break; |
| } |
| break; |
| |
| case USB_REQ_SET_FEATURE: |
| debug("fotg210: set_feature(%d, %d)\n", |
| req->wValue, req->wIndex & 0xf); |
| switch (req->wValue) { |
| case 0: /* Endpoint Halt */ |
| id = req->wIndex & 0xf; |
| setbits_le32(®s->iep[id - 1], IEP_STALL); |
| setbits_le32(®s->oep[id - 1], OEP_STALL); |
| ret = CX_FINISH; |
| break; |
| case 1: /* Remote Wakeup */ |
| case 2: /* Test Mode */ |
| default: |
| ret = CX_STALL; |
| break; |
| } |
| break; |
| |
| case USB_REQ_GET_STATUS: |
| debug("fotg210: get_status\n"); |
| ret = CX_STALL; |
| break; |
| |
| case USB_REQ_SET_DESCRIPTOR: |
| debug("fotg210: set_descriptor\n"); |
| ret = CX_STALL; |
| break; |
| |
| case USB_REQ_SYNCH_FRAME: |
| debug("fotg210: sync frame\n"); |
| ret = CX_STALL; |
| break; |
| } |
| } /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */ |
| |
| if (ret == CX_IDLE && chip->driver->setup) { |
| if (chip->driver->setup(&chip->gadget, req) < 0) |
| ret = CX_STALL; |
| else |
| ret = CX_FINISH; |
| } |
| |
| switch (ret) { |
| case CX_FINISH: |
| setbits_le32(®s->cxfifo, CXFIFO_CXFIN); |
| break; |
| |
| case CX_STALL: |
| setbits_le32(®s->cxfifo, CXFIFO_CXSTALL | CXFIFO_CXFIN); |
| printf("fotg210: cx_stall!\n"); |
| break; |
| |
| case CX_IDLE: |
| debug("fotg210: cx_idle?\n"); |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * fifo - FIFO id |
| * zlp - zero length packet |
| */ |
| static void fotg210_recv(struct fotg210_chip *chip, int ep_id) |
| { |
| struct fotg210_regs *regs = chip->regs; |
| struct fotg210_ep *ep = chip->ep + ep_id; |
| struct fotg210_request *req; |
| int len; |
| |
| if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) { |
| printf("fotg210: ep%d recv, invalid!\n", ep->id); |
| return; |
| } |
| |
| if (list_empty(&ep->queue)) { |
| printf("fotg210: ep%d recv, drop!\n", ep->id); |
| return; |
| } |
| |
| req = list_first_entry(&ep->queue, struct fotg210_request, queue); |
| len = fotg210_dma(ep, req); |
| if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) { |
| list_del_init(&req->queue); |
| if (req->req.complete) |
| req->req.complete(&ep->ep, &req->req); |
| } |
| |
| if (ep->id > 0 && list_empty(&ep->queue)) { |
| setbits_le32(®s->gimr1, |
| GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id))); |
| } |
| } |
| |
| /* |
| * USB Gadget Layer |
| */ |
| static int fotg210_ep_enable( |
| struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) |
| { |
| struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); |
| struct fotg210_chip *chip = ep->chip; |
| struct fotg210_regs *regs = chip->regs; |
| int id = ep_to_fifo(chip, ep->id); |
| int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0; |
| |
| if (!_ep || !desc |
| || desc->bDescriptorType != USB_DT_ENDPOINT |
| || le16_to_cpu(desc->wMaxPacketSize) == 0) { |
| printf("fotg210: bad ep or descriptor\n"); |
| return -EINVAL; |
| } |
| |
| ep->desc = desc; |
| ep->stopped = 0; |
| |
| if (in) |
| setbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_IN)); |
| |
| switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { |
| case USB_ENDPOINT_XFER_CONTROL: |
| return -EINVAL; |
| |
| case USB_ENDPOINT_XFER_ISOC: |
| setbits_le32(®s->fifocfg, |
| FIFOCFG(id, FIFOCFG_EN | FIFOCFG_ISOC)); |
| break; |
| |
| case USB_ENDPOINT_XFER_BULK: |
| setbits_le32(®s->fifocfg, |
| FIFOCFG(id, FIFOCFG_EN | FIFOCFG_BULK)); |
| break; |
| |
| case USB_ENDPOINT_XFER_INT: |
| setbits_le32(®s->fifocfg, |
| FIFOCFG(id, FIFOCFG_EN | FIFOCFG_INTR)); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int fotg210_ep_disable(struct usb_ep *_ep) |
| { |
| struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); |
| struct fotg210_chip *chip = ep->chip; |
| struct fotg210_regs *regs = chip->regs; |
| int id = ep_to_fifo(chip, ep->id); |
| |
| ep->desc = NULL; |
| ep->stopped = 1; |
| |
| clrbits_le32(®s->fifocfg, FIFOCFG(id, FIFOCFG_CFG_MASK)); |
| clrbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_DIR_MASK)); |
| |
| return 0; |
| } |
| |
| static struct usb_request *fotg210_ep_alloc_request( |
| struct usb_ep *_ep, gfp_t gfp_flags) |
| { |
| struct fotg210_request *req = malloc(sizeof(*req)); |
| |
| if (req) { |
| memset(req, 0, sizeof(*req)); |
| INIT_LIST_HEAD(&req->queue); |
| } |
| return &req->req; |
| } |
| |
| static void fotg210_ep_free_request( |
| struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct fotg210_request *req; |
| |
| req = container_of(_req, struct fotg210_request, req); |
| free(req); |
| } |
| |
| static int fotg210_ep_queue( |
| struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) |
| { |
| struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); |
| struct fotg210_chip *chip = ep->chip; |
| struct fotg210_regs *regs = chip->regs; |
| struct fotg210_request *req; |
| |
| req = container_of(_req, struct fotg210_request, req); |
| if (!_req || !_req->complete || !_req->buf |
| || !list_empty(&req->queue)) { |
| printf("fotg210: invalid request to ep%d\n", ep->id); |
| return -EINVAL; |
| } |
| |
| if (!chip || chip->state == USB_STATE_SUSPENDED) { |
| printf("fotg210: request while chip suspended\n"); |
| return -EINVAL; |
| } |
| |
| req->req.actual = 0; |
| req->req.status = -EINPROGRESS; |
| |
| if (req->req.length == 0) { |
| req->req.status = 0; |
| if (req->req.complete) |
| req->req.complete(&ep->ep, &req->req); |
| return 0; |
| } |
| |
| if (ep->id == 0) { |
| do { |
| int len = fotg210_dma(ep, req); |
| if (len < ep->ep.maxpacket) |
| break; |
| if (ep->desc->bEndpointAddress & USB_DIR_IN) |
| udelay(100); |
| } while (req->req.length > req->req.actual); |
| } else { |
| if (ep->desc->bEndpointAddress & USB_DIR_IN) { |
| do { |
| int len = fotg210_dma(ep, req); |
| if (len < ep->ep.maxpacket) |
| break; |
| } while (req->req.length > req->req.actual); |
| } else { |
| list_add_tail(&req->queue, &ep->queue); |
| clrbits_le32(®s->gimr1, |
| GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id))); |
| } |
| } |
| |
| if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) { |
| if (req->req.complete) |
| req->req.complete(&ep->ep, &req->req); |
| } |
| |
| return 0; |
| } |
| |
| static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); |
| struct fotg210_request *req; |
| |
| /* make sure it's actually queued on this endpoint */ |
| list_for_each_entry(req, &ep->queue, queue) { |
| if (&req->req == _req) |
| break; |
| } |
| if (&req->req != _req) |
| return -EINVAL; |
| |
| /* remove the request */ |
| list_del_init(&req->queue); |
| |
| /* update status & invoke complete callback */ |
| if (req->req.status == -EINPROGRESS) { |
| req->req.status = -ECONNRESET; |
| if (req->req.complete) |
| req->req.complete(_ep, &req->req); |
| } |
| |
| return 0; |
| } |
| |
| static int fotg210_ep_halt(struct usb_ep *_ep, int halt) |
| { |
| struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); |
| struct fotg210_chip *chip = ep->chip; |
| struct fotg210_regs *regs = chip->regs; |
| int ret = -1; |
| |
| debug("fotg210: ep%d halt=%d\n", ep->id, halt); |
| |
| /* Endpoint STALL */ |
| if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) { |
| if (halt) { |
| /* wait until all ep fifo empty */ |
| fotg210_cxwait(chip, 0xf00); |
| /* stall */ |
| if (ep->desc->bEndpointAddress & USB_DIR_IN) { |
| setbits_le32(®s->iep[ep->id - 1], |
| IEP_STALL); |
| } else { |
| setbits_le32(®s->oep[ep->id - 1], |
| OEP_STALL); |
| } |
| } else { |
| if (ep->desc->bEndpointAddress & USB_DIR_IN) { |
| clrbits_le32(®s->iep[ep->id - 1], |
| IEP_STALL); |
| } else { |
| clrbits_le32(®s->oep[ep->id - 1], |
| OEP_STALL); |
| } |
| } |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * activate/deactivate link with host. |
| */ |
| static void pullup(struct fotg210_chip *chip, int is_on) |
| { |
| struct fotg210_regs *regs = chip->regs; |
| |
| if (is_on) { |
| if (!chip->pullup) { |
| chip->state = USB_STATE_POWERED; |
| chip->pullup = 1; |
| /* enable the chip */ |
| setbits_le32(®s->dev_ctrl, DEVCTRL_EN); |
| /* clear unplug bit (BIT0) */ |
| clrbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG); |
| } |
| } else { |
| chip->state = USB_STATE_NOTATTACHED; |
| chip->pullup = 0; |
| chip->addr = 0; |
| writel(chip->addr, ®s->dev_addr); |
| /* set unplug bit (BIT0) */ |
| setbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG); |
| /* disable the chip */ |
| clrbits_le32(®s->dev_ctrl, DEVCTRL_EN); |
| } |
| } |
| |
| static int fotg210_pullup(struct usb_gadget *_gadget, int is_on) |
| { |
| struct fotg210_chip *chip; |
| |
| chip = container_of(_gadget, struct fotg210_chip, gadget); |
| |
| debug("fotg210: pullup=%d\n", is_on); |
| |
| pullup(chip, is_on); |
| |
| return 0; |
| } |
| |
| static int fotg210_get_frame(struct usb_gadget *_gadget) |
| { |
| struct fotg210_chip *chip; |
| struct fotg210_regs *regs; |
| |
| chip = container_of(_gadget, struct fotg210_chip, gadget); |
| regs = chip->regs; |
| |
| return SOFFNR_FNR(readl(®s->sof_fnr)); |
| } |
| |
| static struct usb_gadget_ops fotg210_gadget_ops = { |
| .get_frame = fotg210_get_frame, |
| .pullup = fotg210_pullup, |
| }; |
| |
| static struct usb_ep_ops fotg210_ep_ops = { |
| .enable = fotg210_ep_enable, |
| .disable = fotg210_ep_disable, |
| .queue = fotg210_ep_queue, |
| .dequeue = fotg210_ep_dequeue, |
| .set_halt = fotg210_ep_halt, |
| .alloc_request = fotg210_ep_alloc_request, |
| .free_request = fotg210_ep_free_request, |
| }; |
| |
| static struct fotg210_chip controller = { |
| .regs = (void __iomem *)CONFIG_FOTG210_BASE, |
| .gadget = { |
| .name = "fotg210_udc", |
| .ops = &fotg210_gadget_ops, |
| .ep0 = &controller.ep[0].ep, |
| .speed = USB_SPEED_UNKNOWN, |
| .is_dualspeed = 1, |
| .is_otg = 0, |
| .is_a_peripheral = 0, |
| .b_hnp_enable = 0, |
| .a_hnp_support = 0, |
| .a_alt_hnp_support = 0, |
| }, |
| .ep[0] = { |
| .id = 0, |
| .ep = { |
| .name = "ep0", |
| .ops = &fotg210_ep_ops, |
| }, |
| .desc = &ep0_desc, |
| .chip = &controller, |
| .maxpacket = CFG_EP0_MAX_PACKET_SIZE, |
| }, |
| .ep[1] = { |
| .id = 1, |
| .ep = { |
| .name = "ep1", |
| .ops = &fotg210_ep_ops, |
| }, |
| .chip = &controller, |
| .maxpacket = CFG_EPX_MAX_PACKET_SIZE, |
| }, |
| .ep[2] = { |
| .id = 2, |
| .ep = { |
| .name = "ep2", |
| .ops = &fotg210_ep_ops, |
| }, |
| .chip = &controller, |
| .maxpacket = CFG_EPX_MAX_PACKET_SIZE, |
| }, |
| .ep[3] = { |
| .id = 3, |
| .ep = { |
| .name = "ep3", |
| .ops = &fotg210_ep_ops, |
| }, |
| .chip = &controller, |
| .maxpacket = CFG_EPX_MAX_PACKET_SIZE, |
| }, |
| .ep[4] = { |
| .id = 4, |
| .ep = { |
| .name = "ep4", |
| .ops = &fotg210_ep_ops, |
| }, |
| .chip = &controller, |
| .maxpacket = CFG_EPX_MAX_PACKET_SIZE, |
| }, |
| }; |
| |
| int usb_gadget_handle_interrupts(void) |
| { |
| struct fotg210_chip *chip = &controller; |
| struct fotg210_regs *regs = chip->regs; |
| uint32_t id, st, isr, gisr; |
| |
| isr = readl(®s->isr) & (~readl(®s->imr)); |
| gisr = readl(®s->gisr) & (~readl(®s->gimr)); |
| if (!(isr & ISR_DEV) || !gisr) |
| return 0; |
| |
| writel(ISR_DEV, ®s->isr); |
| |
| /* CX interrupts */ |
| if (gisr & GISR_GRP0) { |
| st = readl(®s->gisr0); |
| /* |
| * Write 1 and then 0 works for both W1C & RW. |
| * |
| * HW v1.11.0+: It's a W1C register (write 1 clear) |
| * HW v1.10.0-: It's a R/W register (write 0 clear) |
| */ |
| writel(st & GISR0_CXABORT, ®s->gisr0); |
| writel(0, ®s->gisr0); |
| |
| if (st & GISR0_CXERR) |
| printf("fotg210: cmd error\n"); |
| |
| if (st & GISR0_CXABORT) |
| printf("fotg210: cmd abort\n"); |
| |
| if (st & GISR0_CXSETUP) /* setup */ |
| fotg210_setup(chip); |
| else if (st & GISR0_CXEND) /* command finish */ |
| setbits_le32(®s->cxfifo, CXFIFO_CXFIN); |
| } |
| |
| /* FIFO interrupts */ |
| if (gisr & GISR_GRP1) { |
| st = readl(®s->gisr1); |
| for (id = 0; id < 4; ++id) { |
| if (st & GISR1_RX_FIFO(id)) |
| fotg210_recv(chip, fifo_to_ep(chip, id, 0)); |
| } |
| } |
| |
| /* Device Status Interrupts */ |
| if (gisr & GISR_GRP2) { |
| st = readl(®s->gisr2); |
| /* |
| * Write 1 and then 0 works for both W1C & RW. |
| * |
| * HW v1.11.0+: It's a W1C register (write 1 clear) |
| * HW v1.10.0-: It's a R/W register (write 0 clear) |
| */ |
| writel(st, ®s->gisr2); |
| writel(0, ®s->gisr2); |
| |
| if (st & GISR2_RESET) |
| printf("fotg210: reset by host\n"); |
| else if (st & GISR2_SUSPEND) |
| printf("fotg210: suspend/removed\n"); |
| else if (st & GISR2_RESUME) |
| printf("fotg210: resume\n"); |
| |
| /* Errors */ |
| if (st & GISR2_ISOCERR) |
| printf("fotg210: iso error\n"); |
| if (st & GISR2_ISOCABT) |
| printf("fotg210: iso abort\n"); |
| if (st & GISR2_DMAERR) |
| printf("fotg210: dma error\n"); |
| } |
| |
| return 0; |
| } |
| |
| int usb_gadget_register_driver(struct usb_gadget_driver *driver) |
| { |
| int i, ret = 0; |
| struct fotg210_chip *chip = &controller; |
| |
| if (!driver || !driver->bind || !driver->setup) { |
| puts("fotg210: bad parameter.\n"); |
| return -EINVAL; |
| } |
| |
| INIT_LIST_HEAD(&chip->gadget.ep_list); |
| for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) { |
| struct fotg210_ep *ep = chip->ep + i; |
| |
| ep->ep.maxpacket = ep->maxpacket; |
| INIT_LIST_HEAD(&ep->queue); |
| |
| if (ep->id == 0) { |
| ep->stopped = 0; |
| } else { |
| ep->stopped = 1; |
| list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list); |
| } |
| } |
| |
| if (fotg210_reset(chip)) { |
| puts("fotg210: reset failed.\n"); |
| return -EINVAL; |
| } |
| |
| ret = driver->bind(&chip->gadget); |
| if (ret) { |
| debug("fotg210: driver->bind() returned %d\n", ret); |
| return ret; |
| } |
| chip->driver = driver; |
| |
| return ret; |
| } |
| |
| int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| { |
| struct fotg210_chip *chip = &controller; |
| |
| driver->unbind(&chip->gadget); |
| chip->driver = NULL; |
| |
| pullup(chip, 0); |
| |
| return 0; |
| } |