| /* |
| * (C) Copyright 2014 - 2015 Xilinx, Inc. |
| * Michal Simek <michal.simek@xilinx.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <netdev.h> |
| #include <ahci.h> |
| #include <scsi.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/io.h> |
| #include <usb.h> |
| #include <dwc3-uboot.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int board_init(void) |
| { |
| printf("EL Level:\tEL%d\n", current_el()); |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| u32 val; |
| |
| if (current_el() == 3) { |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; |
| writel(val, &crlapb_base->timestamp_ref_ctrl); |
| |
| /* Program freq register in System counter */ |
| writel(zynqmp_get_system_timer_freq(), |
| &iou_scntr_secure->base_frequency_id_register); |
| /* And enable system counter */ |
| writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN, |
| &iou_scntr_secure->counter_control_register); |
| } |
| /* Program freq register in System counter and enable system counter */ |
| writel(gd->cpu_clk, &iou_scntr->base_frequency_id_register); |
| writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG | |
| ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN, |
| &iou_scntr->counter_control_register); |
| |
| return 0; |
| } |
| |
| #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE) |
| /* |
| * fdt_get_reg - Fill buffer by information from DT |
| */ |
| static phys_size_t fdt_get_reg(const void *fdt, int nodeoffset, void *buf, |
| const u32 *cell, int n) |
| { |
| int i = 0, b, banks; |
| int parent_offset = fdt_parent_offset(fdt, nodeoffset); |
| int address_cells = fdt_address_cells(fdt, parent_offset); |
| int size_cells = fdt_size_cells(fdt, parent_offset); |
| char *p = buf; |
| phys_addr_t val; |
| phys_size_t vals; |
| |
| debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n", |
| __func__, address_cells, size_cells, buf, cell); |
| |
| /* Check memory bank setup */ |
| banks = n % (address_cells + size_cells); |
| if (banks) |
| panic("Incorrect memory setup cells=%d, ac=%d, sc=%d\n", |
| n, address_cells, size_cells); |
| |
| banks = n / (address_cells + size_cells); |
| |
| for (b = 0; b < banks; b++) { |
| debug("%s: Bank #%d:\n", __func__, b); |
| if (address_cells == 2) { |
| val = cell[i + 1]; |
| val <<= 32; |
| val |= cell[i]; |
| val = fdt64_to_cpu(val); |
| debug("%s: addr64=%llx, ptr=%p, cell=%p\n", |
| __func__, val, p, &cell[i]); |
| *(phys_addr_t *)p = val; |
| } else { |
| debug("%s: addr32=%x, ptr=%p\n", |
| __func__, fdt32_to_cpu(cell[i]), p); |
| *(phys_addr_t *)p = fdt32_to_cpu(cell[i]); |
| } |
| p += sizeof(phys_addr_t); |
| i += address_cells; |
| |
| debug("%s: pa=%p, i=%x, size=%zu\n", __func__, p, i, |
| sizeof(phys_addr_t)); |
| |
| if (size_cells == 2) { |
| vals = cell[i + 1]; |
| vals <<= 32; |
| vals |= cell[i]; |
| vals = fdt64_to_cpu(vals); |
| |
| debug("%s: size64=%llx, ptr=%p, cell=%p\n", |
| __func__, vals, p, &cell[i]); |
| *(phys_size_t *)p = vals; |
| } else { |
| debug("%s: size32=%x, ptr=%p\n", |
| __func__, fdt32_to_cpu(cell[i]), p); |
| *(phys_size_t *)p = fdt32_to_cpu(cell[i]); |
| } |
| p += sizeof(phys_size_t); |
| i += size_cells; |
| |
| debug("%s: ps=%p, i=%x, size=%zu\n", |
| __func__, p, i, sizeof(phys_size_t)); |
| } |
| |
| /* Return the first address size */ |
| return *(phys_size_t *)((char *)buf + sizeof(phys_addr_t)); |
| } |
| |
| #define FDT_REG_SIZE sizeof(u32) |
| /* Temp location for sharing data for storing */ |
| /* Up to 64-bit address + 64-bit size */ |
| static u8 tmp[CONFIG_NR_DRAM_BANKS * 16]; |
| |
| void dram_init_banksize(void) |
| { |
| int bank; |
| |
| memcpy(&gd->bd->bi_dram[0], &tmp, sizeof(tmp)); |
| |
| for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { |
| debug("Bank #%d: start %llx\n", bank, |
| (unsigned long long)gd->bd->bi_dram[bank].start); |
| debug("Bank #%d: size %llx\n", bank, |
| (unsigned long long)gd->bd->bi_dram[bank].size); |
| } |
| } |
| |
| int dram_init(void) |
| { |
| int node, len; |
| const void *blob = gd->fdt_blob; |
| const u32 *cell; |
| |
| memset(&tmp, 0, sizeof(tmp)); |
| |
| /* find or create "/memory" node. */ |
| node = fdt_subnode_offset(blob, 0, "memory"); |
| if (node < 0) { |
| printf("%s: Can't get memory node\n", __func__); |
| return node; |
| } |
| |
| /* Get pointer to cells and lenght of it */ |
| cell = fdt_getprop(blob, node, "reg", &len); |
| if (!cell) { |
| printf("%s: Can't get reg property\n", __func__); |
| return -1; |
| } |
| |
| gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE); |
| |
| debug("%s: Initial DRAM size %llx\n", __func__, gd->ram_size); |
| |
| return 0; |
| } |
| #else |
| int dram_init(void) |
| { |
| gd->ram_size = CONFIG_SYS_SDRAM_SIZE; |
| |
| return 0; |
| } |
| #endif |
| |
| void reset_cpu(ulong addr) |
| { |
| } |
| |
| #ifdef CONFIG_SCSI_AHCI_PLAT |
| void scsi_init(void) |
| { |
| ahci_init((void __iomem *)ZYNQMP_SATA_BASEADDR); |
| scsi_scan(1); |
| } |
| #endif |
| |
| int board_late_init(void) |
| { |
| u32 reg = 0; |
| u8 bootmode; |
| |
| reg = readl(&crlapb_base->boot_mode); |
| bootmode = reg & BOOT_MODES_MASK; |
| |
| puts("Bootmode: "); |
| switch (bootmode) { |
| case JTAG_MODE: |
| puts("JTAG_MODE\n"); |
| setenv("modeboot", "jtagboot"); |
| break; |
| case QSPI_MODE_24BIT: |
| case QSPI_MODE_32BIT: |
| setenv("modeboot", "qspiboot"); |
| puts("QSPI_MODE\n"); |
| break; |
| case EMMC_MODE: |
| puts("EMMC_MODE\n"); |
| setenv("modeboot", "sdboot"); |
| break; |
| case SD_MODE: |
| puts("SD_MODE\n"); |
| setenv("modeboot", "sdboot"); |
| break; |
| case SD_MODE1: |
| puts("SD_MODE1\n"); |
| #if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1) |
| setenv("sdbootdev", "1"); |
| #endif |
| setenv("modeboot", "sdboot"); |
| break; |
| case NAND_MODE: |
| puts("NAND_MODE\n"); |
| setenv("modeboot", "nandboot"); |
| break; |
| default: |
| printf("Invalid Boot Mode:0x%x\n", bootmode); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| puts("Board: Xilinx ZynqMP\n"); |
| return 0; |
| } |
| |
| #ifdef CONFIG_USB_DWC3 |
| static struct dwc3_device dwc3_device_data = { |
| .maximum_speed = USB_SPEED_HIGH, |
| .base = ZYNQMP_USB0_XHCI_BASEADDR, |
| .dr_mode = USB_DR_MODE_PERIPHERAL, |
| .index = 0, |
| }; |
| |
| int usb_gadget_handle_interrupts(void) |
| { |
| dwc3_uboot_handle_interrupt(0); |
| return 0; |
| } |
| |
| int board_usb_init(int index, enum usb_init_type init) |
| { |
| return dwc3_uboot_init(&dwc3_device_data); |
| } |
| |
| int board_usb_cleanup(int index, enum usb_init_type init) |
| { |
| dwc3_uboot_exit(index); |
| return 0; |
| } |
| #endif |