blob: f3cd81ad98879b05b55bab3017b22f71b4bffe4b [file] [log] [blame]
/*
*
* Common board functions for OMAP3 based boards.
*
* (C) Copyright 2004-2008
* Texas Instruments, <www.ti.com>
*
* Author :
* Sunil Kumar <sunilsaini05@gmail.com>
* Shashi Ranjan <shashiranjanmca05@gmail.com>
*
* Derived from Beagle Board and 3430 SDP code by
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
#include <asm/cache.h>
#include <asm/armv7.h>
#include <asm/arch/gpio.h>
#include <asm/omap_common.h>
#include <asm/arch/mmc_host_def.h>
#include <i2c.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
/* Declarations */
extern omap3_sysinfo sysinfo;
static void omap3_setup_aux_cr(void);
#ifndef CONFIG_SYS_L2CACHE_OFF
static void omap3_invalidate_l2_cache_secure(void);
#endif
static const struct gpio_bank gpio_bank_34xx[6] = {
{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX },
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
#ifdef CONFIG_SPL_BUILD
/*
* We use static variables because global data is not ready yet.
* Initialized data is available in SPL right from the beginning.
* We would not typically need to save these parameters in regular
* U-Boot. This is needed only in SPL at the moment.
*/
u32 omap3_boot_device = BOOT_DEVICE_NAND;
/* auto boot mode detection is not possible for OMAP3 - hard code */
u32 spl_boot_mode(void)
{
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC2:
return MMCSD_MODE_RAW;
case BOOT_DEVICE_MMC1:
return MMCSD_MODE_FAT;
break;
default:
puts("spl: ERROR: unknown device - can't select boot mode\n");
hang();
}
}
u32 spl_boot_device(void)
{
return omap3_boot_device;
}
int board_mmc_init(bd_t *bis)
{
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC1:
omap_mmc_init(0, 0, 0);
break;
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
omap_mmc_init(1, 0, 0);
break;
}
return 0;
}
void spl_board_init(void)
{
#ifdef CONFIG_SPL_NAND_SUPPORT
gpmc_init();
#endif
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
}
#endif /* CONFIG_SPL_BUILD */
/******************************************************************************
* Routine: secure_unlock
* Description: Setup security registers for access
* (GP Device only)
*****************************************************************************/
void secure_unlock_mem(void)
{
struct pm *pm_rt_ape_base = (struct pm *)PM_RT_APE_BASE_ADDR_ARM;
struct pm *pm_gpmc_base = (struct pm *)PM_GPMC_BASE_ADDR_ARM;
struct pm *pm_ocm_ram_base = (struct pm *)PM_OCM_RAM_BASE_ADDR_ARM;
struct pm *pm_iva2_base = (struct pm *)PM_IVA2_BASE_ADDR_ARM;
struct sms *sms_base = (struct sms *)OMAP34XX_SMS_BASE;
/* Protection Module Register Target APE (PM_RT) */
writel(UNLOCK_1, &pm_rt_ape_base->req_info_permission_1);
writel(UNLOCK_1, &pm_rt_ape_base->read_permission_0);
writel(UNLOCK_1, &pm_rt_ape_base->wirte_permission_0);
writel(UNLOCK_2, &pm_rt_ape_base->addr_match_1);
writel(UNLOCK_3, &pm_gpmc_base->req_info_permission_0);
writel(UNLOCK_3, &pm_gpmc_base->read_permission_0);
writel(UNLOCK_3, &pm_gpmc_base->wirte_permission_0);
writel(UNLOCK_3, &pm_ocm_ram_base->req_info_permission_0);
writel(UNLOCK_3, &pm_ocm_ram_base->read_permission_0);
writel(UNLOCK_3, &pm_ocm_ram_base->wirte_permission_0);
writel(UNLOCK_2, &pm_ocm_ram_base->addr_match_2);
/* IVA Changes */
writel(UNLOCK_3, &pm_iva2_base->req_info_permission_0);
writel(UNLOCK_3, &pm_iva2_base->read_permission_0);
writel(UNLOCK_3, &pm_iva2_base->wirte_permission_0);
/* SDRC region 0 public */
writel(UNLOCK_1, &sms_base->rg_att0);
}
/******************************************************************************
* Routine: secureworld_exit()
* Description: If chip is EMU and boot type is external
* configure secure registers and exit secure world
* general use.
*****************************************************************************/
void secureworld_exit()
{
unsigned long i;
/* configure non-secure access control register */
__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i));
/* enabling co-processor CP10 and CP11 accesses in NS world */
__asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i));
/*
* allow allocation of locked TLBs and L2 lines in NS world
* allow use of PLE registers in NS world also
*/
__asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i));
__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i));
/* Enable ASA in ACR register */
__asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
__asm__ __volatile__("orr %0, %0, #0x10":"=r"(i));
__asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
/* Exiting secure world */
__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i));
__asm__ __volatile__("orr %0, %0, #0x31":"=r"(i));
__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i));
}
/******************************************************************************
* Routine: try_unlock_sram()
* Description: If chip is GP/EMU(special) type, unlock the SRAM for
* general use.
*****************************************************************************/
void try_unlock_memory()
{
int mode;
int in_sdram = is_running_in_sdram();
/*
* if GP device unlock device SRAM for general use
* secure code breaks for Secure/Emulation device - HS/E/T
*/
mode = get_device_type();
if (mode == GP_DEVICE)
secure_unlock_mem();
/*
* If device is EMU and boot is XIP external booting
* Unlock firewalls and disable L2 and put chip
* out of secure world
*
* Assuming memories are unlocked by the demon who put us in SDRAM
*/
if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F)
&& (!in_sdram)) {
secure_unlock_mem();
secureworld_exit();
}
return;
}
/******************************************************************************
* Routine: s_init
* Description: Does early system init of muxing and clocks.
* - Called path is with SRAM stack.
*****************************************************************************/
void s_init(void)
{
int in_sdram = is_running_in_sdram();
watchdog_init();
try_unlock_memory();
/* Errata workarounds */
omap3_setup_aux_cr();
#ifndef CONFIG_SYS_L2CACHE_OFF
/* Invalidate L2-cache from secure mode */
omap3_invalidate_l2_cache_secure();
#endif
set_muxconf_regs();
sdelay(100);
prcm_init();
per_clocks_enable();
#ifdef CONFIG_USB_EHCI_OMAP
ehci_clocks_enable();
#endif
#ifdef CONFIG_SPL_BUILD
gd = &gdata;
preloader_console_init();
timer_init();
#endif
if (!in_sdram)
mem_init();
}
/*
* Routine: misc_init_r
* Description: A basic misc_init_r that just displays the die ID
*/
int __weak misc_init_r(void)
{
dieid_num_r();
return 0;
}
/******************************************************************************
* Routine: wait_for_command_complete
* Description: Wait for posting to finish on watchdog
*****************************************************************************/
void wait_for_command_complete(struct watchdog *wd_base)
{
int pending = 1;
do {
pending = readl(&wd_base->wwps);
} while (pending);
}
/******************************************************************************
* Routine: watchdog_init
* Description: Shut down watch dogs
*****************************************************************************/
void watchdog_init(void)
{
struct watchdog *wd2_base = (struct watchdog *)WD2_BASE;
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
/*
* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
* either taken care of by ROM (HS/EMU) or not accessible (GP).
* We need to take care of WD2-MPU or take a PRCM reset. WD3
* should not be running and does not generate a PRCM reset.
*/
sr32(&prcm_base->fclken_wkup, 5, 1, 1);
sr32(&prcm_base->iclken_wkup, 5, 1, 1);
wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5);
writel(WD_UNLOCK1, &wd2_base->wspr);
wait_for_command_complete(wd2_base);
writel(WD_UNLOCK2, &wd2_base->wspr);
}
/******************************************************************************
* Dummy function to handle errors for EABI incompatibility
*****************************************************************************/
void abort(void)
{
}
#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD)
/******************************************************************************
* OMAP3 specific command to switch between NAND HW and SW ecc
*****************************************************************************/
static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
if (argc != 2)
goto usage;
if (strncmp(argv[1], "hw", 2) == 0)
omap_nand_switch_ecc(1);
else if (strncmp(argv[1], "sw", 2) == 0)
omap_nand_switch_ecc(0);
else
goto usage;
return 0;
usage:
printf ("Usage: nandecc %s\n", cmdtp->usage);
return 1;
}
U_BOOT_CMD(
nandecc, 2, 1, do_switch_ecc,
"switch OMAP3 NAND ECC calculation algorithm",
"[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm"
);
#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */
#ifdef CONFIG_DISPLAY_BOARDINFO
/**
* Print board information
*/
int checkboard (void)
{
char *mem_s ;
if (is_mem_sdr())
mem_s = "mSDR";
else
mem_s = "LPDDR";
printf("%s + %s/%s\n", sysinfo.board_string, mem_s,
sysinfo.nand_string);
return 0;
}
#endif /* CONFIG_DISPLAY_BOARDINFO */
static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
{
u32 i, num_params = *parameters;
u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA;
/*
* copy the parameters to an un-cached area to avoid coherency
* issues
*/
for (i = 0; i < num_params; i++) {
__raw_writel(*parameters, sram_scratch_space);
parameters++;
sram_scratch_space++;
}
/* Now make the PPA call */
do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
}
static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits)
{
u32 acr;
/* Read ACR */
asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
acr &= ~clear_bits;
acr |= set_bits;
if (get_device_type() == GP_DEVICE) {
omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_WRITE_ACR,
acr);
} else {
struct emu_hal_params emu_romcode_params;
emu_romcode_params.num_params = 1;
emu_romcode_params.param1 = acr;
omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
(u32 *)&emu_romcode_params);
}
}
static void omap3_setup_aux_cr(void)
{
/* Workaround for Cortex-A8 errata: #454179 #430973
* Set "IBE" bit
* Set "Disable Branch Size Mispredicts" bit
* Workaround for erratum #621766
* Enable L1NEON bit
* ACR |= (IBE | DBSM | L1NEON) => ACR |= 0xE0
*/
omap3_update_aux_cr_secure(0xE0, 0);
}
#ifndef CONFIG_SYS_L2CACHE_OFF
static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
{
u32 acr;
/* Read ACR */
asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
acr &= ~clear_bits;
acr |= set_bits;
/* Write ACR - affects non-secure banked bits */
asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
}
/* Invalidate the entire L2 cache from secure mode */
static void omap3_invalidate_l2_cache_secure(void)
{
if (get_device_type() == GP_DEVICE) {
omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_L2_INVAL,
0);
} else {
struct emu_hal_params emu_romcode_params;
emu_romcode_params.num_params = 1;
emu_romcode_params.param1 = 0;
omap3_emu_romcode_call(OMAP3_EMU_HAL_API_L2_INVAL,
(u32 *)&emu_romcode_params);
}
}
void v7_outer_cache_enable(void)
{
/* Set L2EN */
omap3_update_aux_cr_secure(0x2, 0);
/*
* On some revisions L2EN bit is banked on some revisions it's not
* No harm in setting both banked bits(in fact this is required
* by an erratum)
*/
omap3_update_aux_cr(0x2, 0);
}
void omap3_outer_cache_disable(void)
{
/* Clear L2EN */
omap3_update_aux_cr_secure(0, 0x2);
/*
* On some revisions L2EN bit is banked on some revisions it's not
* No harm in clearing both banked bits(in fact this is required
* by an erratum)
*/
omap3_update_aux_cr(0, 0x2);
}
#endif
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif