drivers/s3c24x0_i2c.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2002
  * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /* This code should work for both the S3C2400 and the S3C2410
  * as they seem to have the same I2C controller inside.
  * The different address mapping is handled by the s3c24xx.h files below.
  */

 #include <common.h>

 #ifdef CONFIG_DRIVER_S3C24X0_I2C

 #if defined(CONFIG_S3C2400)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
 #include <s3c2410.h>
 #endif
 #include <i2c.h>

 #ifdef CONFIG_HARD_I2C

 #define	I2C_WRITE	0
 #define I2C_READ	1

 #define I2C_OK		0
 #define I2C_NOK		1
 #define I2C_NACK	2
 #define I2C_NOK_LA	3		/* Lost arbitration */
 #define I2C_NOK_TOUT	4		/* time out */

 #define I2CSTAT_BSY	0x20		/* Busy bit */
 #define I2CSTAT_NACK	0x01		/* Nack bit */
 #define I2CCON_IRPND	0x10		/* Interrupt pending bit */
 #define I2C_MODE_MT	0xC0		/* Master Transmit Mode */
 #define I2C_MODE_MR	0x80		/* Master Receive Mode */
 #define I2C_START_STOP	0x20		/* START / STOP */
 #define I2C_TXRX_ENA	0x10		/* I2C Tx/Rx enable */

 #define I2C_TIMEOUT 1			/* 1 seconde */


 static int GetI2CSDA(void)
 {
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();

 	return (gpio->GPEDAT & 0x8000) >> 15;
 }

 #if 0
 static void SetI2CSDA(int x)
 {
 	rGPEDAT = (rGPEDAT & ~0x8000) | (x&1) << 15;
 }
 #endif

 static void SetI2CSCL(int x)
 {
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();

 	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
 }


 static int WaitForXfer(void)
 {
     S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
     int i, status;

     i = I2C_TIMEOUT * 1000;
     status = i2c->IICCON;
     while ((i > 0) && !(status & I2CCON_IRPND)) {
 	udelay(1000);
 	status = i2c->IICCON;
 	i--;
     }

     return(status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
 }

 static int IsACK(void)
 {
     S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();

     return(!(i2c->IICSTAT & I2CSTAT_NACK));
 }

 static void ReadWriteByte(void)
 {
     S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();

     i2c->IICCON &= ~I2CCON_IRPND;
 }

 void i2c_init (int speed, int slaveadd)
 {
     S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
     S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
     ulong freq, pres = 16, div;
     int i, status;

     /* wait for some time to give previous transfer a chance to finish */

     i = I2C_TIMEOUT * 1000;
     status = i2c->IICSTAT;
     while ((i > 0) && (status & I2CSTAT_BSY)) {
 	udelay(1000);
 	status = i2c->IICSTAT;
 	i--;
     }

     if ((status & I2CSTAT_BSY) || GetI2CSDA() == 0) {
 	ulong old_gpecon = gpio->GPECON;
 	/* bus still busy probably by (most) previously interrupted transfer */

 	/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
 	gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;

 	/* toggle I2CSCL until bus idle */
 	SetI2CSCL(0); udelay(1000);
 	i = 10;
 	while ((i > 0) && (GetI2CSDA() != 1)) {
 		SetI2CSCL(1); udelay(1000);
 		SetI2CSCL(0); udelay(1000);
 		i--;
 	}
 	SetI2CSCL(1); udelay(1000);

 	/* restore pin functions */
 	gpio->GPECON = old_gpecon;
     }

     /* calculate prescaler and divisor values */
     freq = get_PCLK();
     if ((freq / pres / (16+1)) > speed)
 	/* set prescaler to 512 */
 	pres = 512;

     div = 0;
     while ((freq / pres / (div+1)) > speed)
 	div++;

     /* set prescaler, divisor according to freq, also set
        ACKGEN, IRQ */
     i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);

     /* init to SLAVE REVEIVE and set slaveaddr */
     i2c->IICSTAT = 0;
     i2c->IICADD = slaveadd;
     /* program Master Transmit (and implicit STOP) */
     i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;

 }

 /*
   cmd_type is 0 for write 1 for read.

   addr_len can take any value from 0-255, it is only limited
   by the char, we could make it larger if needed. If it is
   0 we skip the address write cycle.

 */
 static
 int i2c_transfer(unsigned char cmd_type,
 		 unsigned char chip,
 		 unsigned char addr[],
 		 unsigned char addr_len,
 		 unsigned char data[],
 		 unsigned short data_len)
 {
     S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
     int i, status, result;

     if (data == 0 || data_len == 0) {
 	/*Don't support data transfer of no length or to address 0*/
 	printf( "i2c_transfer: bad call\n" );
 	return I2C_NOK;
     }

     /*CheckDelay(); */

     /* Check I2C bus idle */
     i = I2C_TIMEOUT * 1000;
     status = i2c->IICSTAT;
     while ((i > 0) && (status & I2CSTAT_BSY)) {
 	udelay(1000);
 	status = i2c->IICSTAT;
 	i--;
     }


     if (status & I2CSTAT_BSY) {
 	result = I2C_NOK_TOUT;
 	return(result);
     }

     i2c->IICCON |= 0x80;

     result = I2C_OK;

     switch (cmd_type) {
 	case I2C_WRITE:
 	    if (addr && addr_len) {
 		i2c->IICDS = chip;
 		/* send START */
 		i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
 		i = 0;
 		while ((i < addr_len) && (result == I2C_OK)) {
 		    result = WaitForXfer();
 		    i2c->IICDS = addr[i];
 		    ReadWriteByte();
 		    i++;
 		}
 		i = 0;
 		while ((i < data_len) && (result == I2C_OK)) {
 		    result = WaitForXfer();
 		    i2c->IICDS = data[i];
 		    ReadWriteByte();
 		    i++;
 		}
 	    } else {
 		i2c->IICDS = chip;
 		/* send START */
 		i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
 		i = 0;
 		while ((i < data_len) && (result = I2C_OK)) {
 		    result = WaitForXfer();
 		    i2c->IICDS = data[i];
 		    ReadWriteByte();
 		    i++;
 		}
 	    }

 	    if (result == I2C_OK)
 		result = WaitForXfer();

 	    /* send STOP */
 	    i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
 	    ReadWriteByte();
 	    break;

 	case I2C_READ:
 	    if (addr && addr_len) {
 		i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
 		i2c->IICDS = chip;
 		/* send START */
 		i2c->IICSTAT |= I2C_START_STOP;
 		result = WaitForXfer();
 		if (IsACK()) {
 		    i = 0;
 		    while ((i < addr_len) && (result == I2C_OK)) {
 			i2c->IICDS = addr[i];
 			ReadWriteByte();
 			result = WaitForXfer();
 			i++;
 		    }

 		    i2c->IICDS = chip;
 		    /* resend START */
 		    i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP;
 		    ReadWriteByte();
 		    result = WaitForXfer();
 		    i = 0;
 		    while ((i < data_len) && (result == I2C_OK)) {
 			/* disable ACK for final READ */
 			if (i == data_len - 1)
 			    i2c->IICCON &= ~0x80;
 			ReadWriteByte();
 			result = WaitForXfer();
 			data[i] = i2c->IICDS;
 			i++;
 		    }
 		} else {
 		    result = I2C_NACK;
 		}

 	    } else {
 		i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
 		i2c->IICDS = chip;
 		/* send START */
 		i2c->IICSTAT |= I2C_START_STOP;
 		result = WaitForXfer();

 		if (IsACK()) {
 		    i = 0;
 		    while ((i < data_len) && (result == I2C_OK)) {
 			/* disable ACK for final READ */
 			if (i == data_len - 1)
 			    i2c->IICCON &= ~0x80;
 			ReadWriteByte();
 			result = WaitForXfer();
 			data[i] = i2c->IICDS;
 			i++;
 		    }
 		} else {
 		    result = I2C_NACK;
 		}
 	    }

 	    /* send STOP */
 	    i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
 	    ReadWriteByte();
 	    break;

 	default:
 	    printf( "i2c_transfer: bad call\n" );
 	    result = I2C_NOK;
 	    break;
     }

     return (result);
 }

 int i2c_probe (uchar chip)
 {
     uchar buf[1];

     buf[0] = 0;

     /*
      * What is needed is to send the chip address and verify that the
      * address was <ACK>ed (i.e. there was a chip at that address which
      * drove the data line low).
      */
     return(i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
 }

 int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 {
     uchar xaddr[4];
     int ret;

     if ( alen > 4 ) {
 	printf ("I2C read: addr len %d not supported\n", alen);
 	return 1;
     }

     if ( alen > 0 ) {
 	xaddr[0] = (addr >> 24) & 0xFF;
 	xaddr[1] = (addr >> 16) & 0xFF;
 	xaddr[2] = (addr >> 8) & 0xFF;
 	xaddr[3] = addr & 0xFF;
     }


 #ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
     /*
      * EEPROM chips that implement "address overflow" are ones
      * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
      * address and the extra bits end up in the "chip address"
      * bit slots. This makes a 24WC08 (1Kbyte) chip look like
      * four 256 byte chips.
      *
      * Note that we consider the length of the address field to
      * still be one byte because the extra address bits are
      * hidden in the chip address.
      */
     if( alen > 0 )
 	chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
     if( (ret = i2c_transfer(I2C_READ, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
 	printf( "I2c read: failed %d\n", ret);
 	return 1;
     }
     return 0;
 }

 int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 {
     uchar xaddr[4];

     if ( alen > 4 ) {
 	printf ("I2C write: addr len %d not supported\n", alen);
 	return 1;
     }

     if ( alen > 0 ) {
 	xaddr[0] = (addr >> 24) & 0xFF;
 	xaddr[1] = (addr >> 16) & 0xFF;
 	xaddr[2] = (addr >> 8) & 0xFF;
 	xaddr[3] = addr & 0xFF;
     }

 #ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
     /*
      * EEPROM chips that implement "address overflow" are ones
      * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
      * address and the extra bits end up in the "chip address"
      * bit slots. This makes a 24WC08 (1Kbyte) chip look like
      * four 256 byte chips.
      *
      * Note that we consider the length of the address field to
      * still be one byte because the extra address bits are
      * hidden in the chip address.
      */
     if( alen > 0 )
 	chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
     return (i2c_transfer(I2C_WRITE, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
 }

 #endif	/* CONFIG_HARD_I2C */

 #endif /* CONFIG_DRIVER_S3C24X0_I2C */
	/*
	* (C) Copyright 2002
	* David Mueller, ELSOFT AG, d.mueller@elsoft.ch
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/* This code should work for both the S3C2400 and the S3C2410
	* as they seem to have the same I2C controller inside.
	* The different address mapping is handled by the s3c24xx.h files below.
	*/

	#include <common.h>

	#ifdef CONFIG_DRIVER_S3C24X0_I2C

	#if defined(CONFIG_S3C2400)
	#include <s3c2400.h>
	#elif defined(CONFIG_S3C2410)
	#include <s3c2410.h>
	#endif
	#include <i2c.h>

	#ifdef CONFIG_HARD_I2C

	#define I2C_WRITE 0
	#define I2C_READ 1

	#define I2C_OK 0
	#define I2C_NOK 1
	#define I2C_NACK 2
	#define I2C_NOK_LA 3 /* Lost arbitration */
	#define I2C_NOK_TOUT 4 /* time out */

	#define I2CSTAT_BSY 0x20 /* Busy bit */
	#define I2CSTAT_NACK 0x01 /* Nack bit */
	#define I2CCON_IRPND 0x10 /* Interrupt pending bit */
	#define I2C_MODE_MT 0xC0 /* Master Transmit Mode */
	#define I2C_MODE_MR 0x80 /* Master Receive Mode */
	#define I2C_START_STOP 0x20 /* START / STOP */
	#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */

	#define I2C_TIMEOUT 1 /* 1 seconde */


	static int GetI2CSDA(void)
	{
	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();

	return (gpio->GPEDAT & 0x8000) >> 15;
	}

	#if 0
	static void SetI2CSDA(int x)
	{
	rGPEDAT = (rGPEDAT & ~0x8000) \| (x&1) << 15;
	}
	#endif

	static void SetI2CSCL(int x)
	{
	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();

	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) \| (x&1) << 14;
	}


	static int WaitForXfer(void)
	{
	S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
	int i, status;

	i = I2C_TIMEOUT * 1000;
	status = i2c->IICCON;
	while ((i > 0) && !(status & I2CCON_IRPND)) {
	udelay(1000);
	status = i2c->IICCON;
	i--;
	}

	return(status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
	}

	static int IsACK(void)
	{
	S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();

	return(!(i2c->IICSTAT & I2CSTAT_NACK));
	}

	static void ReadWriteByte(void)
	{
	S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();

	i2c->IICCON &= ~I2CCON_IRPND;
	}

	void i2c_init (int speed, int slaveadd)
	{
	S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
	ulong freq, pres = 16, div;
	int i, status;

	/* wait for some time to give previous transfer a chance to finish */

	i = I2C_TIMEOUT * 1000;
	status = i2c->IICSTAT;
	while ((i > 0) && (status & I2CSTAT_BSY)) {
	udelay(1000);
	status = i2c->IICSTAT;
	i--;
	}

	if ((status & I2CSTAT_BSY) \|\| GetI2CSDA() == 0) {
	ulong old_gpecon = gpio->GPECON;
	/* bus still busy probably by (most) previously interrupted transfer */

	/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
	gpio->GPECON = (gpio->GPECON & ~0xF0000000) \| 0x10000000;

	/* toggle I2CSCL until bus idle */
	SetI2CSCL(0); udelay(1000);
	i = 10;
	while ((i > 0) && (GetI2CSDA() != 1)) {
	SetI2CSCL(1); udelay(1000);
	SetI2CSCL(0); udelay(1000);
	i--;
	}
	SetI2CSCL(1); udelay(1000);

	/* restore pin functions */
	gpio->GPECON = old_gpecon;
	}

	/* calculate prescaler and divisor values */
	freq = get_PCLK();
	if ((freq / pres / (16+1)) > speed)
	/* set prescaler to 512 */
	pres = 512;

	div = 0;
	while ((freq / pres / (div+1)) > speed)
	div++;

	/* set prescaler, divisor according to freq, also set
	ACKGEN, IRQ */
	i2c->IICCON = (div & 0x0F) \| 0xA0 \| ((pres == 512) ? 0x40 : 0);

	/* init to SLAVE REVEIVE and set slaveaddr */
	i2c->IICSTAT = 0;
	i2c->IICADD = slaveadd;
	/* program Master Transmit (and implicit STOP) */
	i2c->IICSTAT = I2C_MODE_MT \| I2C_TXRX_ENA;

	}

	/*
	cmd_type is 0 for write 1 for read.

	addr_len can take any value from 0-255, it is only limited
	by the char, we could make it larger if needed. If it is
	0 we skip the address write cycle.

	*/
	static
	int i2c_transfer(unsigned char cmd_type,
	unsigned char chip,
	unsigned char addr[],
	unsigned char addr_len,
	unsigned char data[],
	unsigned short data_len)
	{
	S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
	int i, status, result;

	if (data == 0 \|\| data_len == 0) {
	/Don't support data transfer of no length or to address 0/
	printf( "i2c_transfer: bad call\n" );
	return I2C_NOK;
	}

	/CheckDelay(); /

	/* Check I2C bus idle */
	i = I2C_TIMEOUT * 1000;
	status = i2c->IICSTAT;
	while ((i > 0) && (status & I2CSTAT_BSY)) {
	udelay(1000);
	status = i2c->IICSTAT;
	i--;
	}


	if (status & I2CSTAT_BSY) {
	result = I2C_NOK_TOUT;
	return(result);
	}

	i2c->IICCON \|= 0x80;

	result = I2C_OK;

	switch (cmd_type) {
	case I2C_WRITE:
	if (addr && addr_len) {
	i2c->IICDS = chip;
	/* send START */
	i2c->IICSTAT = I2C_MODE_MT \| I2C_TXRX_ENA \| I2C_START_STOP;
	i = 0;
	while ((i < addr_len) && (result == I2C_OK)) {
	result = WaitForXfer();
	i2c->IICDS = addr[i];
	ReadWriteByte();
	i++;
	}
	i = 0;
	while ((i < data_len) && (result == I2C_OK)) {
	result = WaitForXfer();
	i2c->IICDS = data[i];
	ReadWriteByte();
	i++;
	}
	} else {
	i2c->IICDS = chip;
	/* send START */
	i2c->IICSTAT = I2C_MODE_MT \| I2C_TXRX_ENA \| I2C_START_STOP;
	i = 0;
	while ((i < data_len) && (result = I2C_OK)) {
	result = WaitForXfer();
	i2c->IICDS = data[i];
	ReadWriteByte();
	i++;
	}
	}

	if (result == I2C_OK)
	result = WaitForXfer();

	/* send STOP */
	i2c->IICSTAT = I2C_MODE_MR \| I2C_TXRX_ENA;
	ReadWriteByte();
	break;

	case I2C_READ:
	if (addr && addr_len) {
	i2c->IICSTAT = I2C_MODE_MT \| I2C_TXRX_ENA;
	i2c->IICDS = chip;
	/* send START */
	i2c->IICSTAT \|= I2C_START_STOP;
	result = WaitForXfer();
	if (IsACK()) {
	i = 0;
	while ((i < addr_len) && (result == I2C_OK)) {
	i2c->IICDS = addr[i];
	ReadWriteByte();
	result = WaitForXfer();
	i++;
	}

	i2c->IICDS = chip;
	/* resend START */
	i2c->IICSTAT = I2C_MODE_MR \| I2C_TXRX_ENA \| I2C_START_STOP;
	ReadWriteByte();
	result = WaitForXfer();
	i = 0;
	while ((i < data_len) && (result == I2C_OK)) {
	/* disable ACK for final READ */
	if (i == data_len - 1)
	i2c->IICCON &= ~0x80;
	ReadWriteByte();
	result = WaitForXfer();
	data[i] = i2c->IICDS;
	i++;
	}
	} else {
	result = I2C_NACK;
	}

	} else {
	i2c->IICSTAT = I2C_MODE_MR \| I2C_TXRX_ENA;
	i2c->IICDS = chip;
	/* send START */
	i2c->IICSTAT \|= I2C_START_STOP;
	result = WaitForXfer();

	if (IsACK()) {
	i = 0;
	while ((i < data_len) && (result == I2C_OK)) {
	/* disable ACK for final READ */
	if (i == data_len - 1)
	i2c->IICCON &= ~0x80;
	ReadWriteByte();
	result = WaitForXfer();
	data[i] = i2c->IICDS;
	i++;
	}
	} else {
	result = I2C_NACK;
	}
	}

	/* send STOP */
	i2c->IICSTAT = I2C_MODE_MR \| I2C_TXRX_ENA;
	ReadWriteByte();
	break;

	default:
	printf( "i2c_transfer: bad call\n" );
	result = I2C_NOK;
	break;
	}

	return (result);
	}

	int i2c_probe (uchar chip)
	{
	uchar buf[1];

	buf[0] = 0;

	/*
	* What is needed is to send the chip address and verify that the
	* address was <ACK>ed (i.e. there was a chip at that address which
	* drove the data line low).
	*/
	return(i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
	}

	int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
	{
	uchar xaddr[4];
	int ret;

	if ( alen > 4 ) {
	printf ("I2C read: addr len %d not supported\n", alen);
	return 1;
	}

	if ( alen > 0 ) {
	xaddr[0] = (addr >> 24) & 0xFF;
	xaddr[1] = (addr >> 16) & 0xFF;
	xaddr[2] = (addr >> 8) & 0xFF;
	xaddr[3] = addr & 0xFF;
	}


	#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
	/*
	* EEPROM chips that implement "address overflow" are ones
	* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	* address and the extra bits end up in the "chip address"
	* bit slots. This makes a 24WC08 (1Kbyte) chip look like
	* four 256 byte chips.
	*
	* Note that we consider the length of the address field to
	* still be one byte because the extra address bits are
	* hidden in the chip address.
	*/
	if( alen > 0 )
	chip \|= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
	#endif
	if( (ret = i2c_transfer(I2C_READ, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
	printf( "I2c read: failed %d\n", ret);
	return 1;
	}
	return 0;
	}

	int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
	{
	uchar xaddr[4];

	if ( alen > 4 ) {
	printf ("I2C write: addr len %d not supported\n", alen);
	return 1;
	}

	if ( alen > 0 ) {
	xaddr[0] = (addr >> 24) & 0xFF;
	xaddr[1] = (addr >> 16) & 0xFF;
	xaddr[2] = (addr >> 8) & 0xFF;
	xaddr[3] = addr & 0xFF;
	}

	#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
	/*
	* EEPROM chips that implement "address overflow" are ones
	* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	* address and the extra bits end up in the "chip address"
	* bit slots. This makes a 24WC08 (1Kbyte) chip look like
	* four 256 byte chips.
	*
	* Note that we consider the length of the address field to
	* still be one byte because the extra address bits are
	* hidden in the chip address.
	*/
	if( alen > 0 )
	chip \|= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
	#endif
	return (i2c_transfer(I2C_WRITE, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
	}

	#endif /* CONFIG_HARD_I2C */

	#endif /* CONFIG_DRIVER_S3C24X0_I2C */