| /* |
| * Copyright 2007 Freescale Semiconductor, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License Version 2. This file is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #ifndef _CONFIG_CMD_ALL_H |
| #define _CONFIG_CMD_ALL_H |
| |
| /* |
| * Alphabetical list of all possible commands. |
| */ |
| |
| #define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ |
| #define CONFIG_CMD_ASKENV /* ask for env variable */ |
| #define CONFIG_CMD_BDI /* bdinfo */ |
| #define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ |
| #define CONFIG_CMD_BMP /* BMP support */ |
| #define CONFIG_CMD_BOOTD /* bootd */ |
| #define CONFIG_CMD_BOOTZ /* boot zImage */ |
| #define CONFIG_CMD_BSP /* Board Specific functions */ |
| #define CONFIG_CMD_CACHE /* icache, dcache */ |
| #define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ |
| #define CONFIG_CMD_CLK /* Clock support */ |
| #define CONFIG_CMD_CONSOLE /* coninfo */ |
| #define CONFIG_CMD_DATE /* support for RTC, date/time...*/ |
| #define CONFIG_CMD_DHCP /* DHCP Support */ |
| #define CONFIG_CMD_DIAG /* Diagnostics */ |
| #define CONFIG_CMD_DISPLAY /* Display support */ |
| #define CONFIG_CMD_DOC /* Disk-On-Chip Support */ |
| #define CONFIG_CMD_DTT /* Digital Therm and Thermostat */ |
| #define CONFIG_CMD_ECHO /* echo arguments */ |
| #define CONFIG_CMD_EDITENV /* editenv */ |
| #define CONFIG_CMD_EEPROM /* EEPROM read/write support */ |
| #define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */ |
| #define CONFIG_CMD_EXT2 /* EXT2 Support */ |
| #define CONFIG_CMD_FAT /* FAT support */ |
| #define CONFIG_CMD_FDC /* Floppy Disk Support */ |
| #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ |
| #define CONFIG_CMD_FPGA /* FPGA configuration Support */ |
| #define CONFIG_CMD_FUSE /* Device fuse support */ |
| #define CONFIG_CMD_GETTIME /* Get time since boot */ |
| #define CONFIG_CMD_HASH /* calculate hash / digest */ |
| #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ |
| #define CONFIG_CMD_I2C /* I2C serial bus support */ |
| #define CONFIG_CMD_IDE /* IDE harddisk support */ |
| #define CONFIG_CMD_IMI /* iminfo */ |
| #define CONFIG_CMD_IMLS /* List all found images */ |
| #define CONFIG_CMD_IMMAP /* IMMR dump support */ |
| #define CONFIG_CMD_IO /* Access to X86 IO space */ |
| #define CONFIG_CMD_IRQ /* irqinfo */ |
| #define CONFIG_CMD_ITEST /* Integer (and string) test */ |
| #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ |
| #define CONFIG_CMD_KGDB /* kgdb */ |
| #define CONFIG_CMD_LICENSE /* console license display */ |
| #define CONFIG_CMD_LOADB /* loadb */ |
| #define CONFIG_CMD_LOADS /* loads */ |
| #define CONFIG_CMD_MEMINFO /* meminfo */ |
| #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */ |
| #define CONFIG_CMD_MEMTEST /* mtest */ |
| #define CONFIG_CMD_MFSL /* FSL support for Microblaze */ |
| #define CONFIG_CMD_MII /* MII support */ |
| #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ |
| #define CONFIG_CMD_MMC /* MMC support */ |
| #define CONFIG_CMD_MTDPARTS /* mtd parts support */ |
| #define CONFIG_CMD_NAND /* NAND support */ |
| #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ |
| #define CONFIG_CMD_NFS /* NFS support */ |
| #define CONFIG_CMD_ONENAND /* OneNAND support */ |
| #define CONFIG_CMD_PCI /* pciinfo */ |
| #define CONFIG_CMD_PCMCIA /* PCMCIA support */ |
| #define CONFIG_CMD_PING /* ping support */ |
| #define CONFIG_CMD_PORTIO /* Port I/O */ |
| #define CONFIG_CMD_REGINFO /* Register dump */ |
| #define CONFIG_CMD_REISER /* Reiserfs support */ |
| #define CONFIG_CMD_RARP /* rarpboot support */ |
| #define CONFIG_CMD_READ /* Read data from partition */ |
| #define CONFIG_CMD_RUN /* run command in env variable */ |
| #define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */ |
| #define CONFIG_CMD_SAVEENV /* saveenv */ |
| #define CONFIG_CMD_SAVES /* save S record dump */ |
| #define CONFIG_CMD_SCSI /* SCSI Support */ |
| #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ |
| #define CONFIG_CMD_SETEXPR /* setexpr support */ |
| #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ |
| #define CONFIG_CMD_SNTP /* SNTP support */ |
| #define CONFIG_CMD_SOURCE /* "source" command support */ |
| #define CONFIG_CMD_SPI /* SPI utility */ |
| #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ |
| #define CONFIG_CMD_UBI /* UBI Support */ |
| #define CONFIG_CMD_UBIFS /* UBIFS Support */ |
| #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ |
| #define CONFIG_CMD_UNZIP /* unzip from memory to memory */ |
| #define CONFIG_CMD_USB /* USB Support */ |
| #define CONFIG_CMD_XIMG /* Load part of Multi Image */ |
| #define CONFIG_CMD_ZFS /* ZFS Support */ |
| |
| #endif /* _CONFIG_CMD_ALL_H */ |