blob: 90418ddc1dabf59cae7a57d862c59f858ed46faa [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Amlogic G12A DWC3 Glue layer
*
* Copyright (C) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <common.h>
#include <log.h>
#include <asm-generic/io.h>
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dwc3-uboot.h>
#include <generic-phy.h>
#include <linux/delay.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <malloc.h>
#include <regmap.h>
#include <usb.h>
#include "core.h"
#include "gadget.h"
#include <reset.h>
#include <clk.h>
#include <power/regulator.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/compat.h>
/* USB2 Ports Control Registers */
#define U2P_REG_SIZE 0x20
#define U2P_R0 0x0
#define U2P_R0_HOST_DEVICE BIT(0)
#define U2P_R0_POWER_OK BIT(1)
#define U2P_R0_HAST_MODE BIT(2)
#define U2P_R0_POWER_ON_RESET BIT(3)
#define U2P_R0_ID_PULLUP BIT(4)
#define U2P_R0_DRV_VBUS BIT(5)
#define U2P_R1 0x4
#define U2P_R1_PHY_READY BIT(0)
#define U2P_R1_ID_DIG BIT(1)
#define U2P_R1_OTG_SESSION_VALID BIT(2)
#define U2P_R1_VBUS_VALID BIT(3)
/* USB Glue Control Registers */
#define USB_R0 0x80
#define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17)
#define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18)
#define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19)
#define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29)
#define USB_R0_U2D_ACT BIT(31)
#define USB_R1 0x84
#define USB_R1_U3H_BIGENDIAN_GS BIT(0)
#define USB_R1_U3H_PME_ENABLE BIT(1)
#define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(4, 2)
#define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(9, 7)
#define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(13, 12)
#define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16)
#define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17)
#define USB_R1_U3H_HOST_MSI_ENABLE BIT(18)
#define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19)
#define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25)
#define USB_R2 0x88
#define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20)
#define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26)
#define USB_R3 0x8c
#define USB_R3_P30_SSC_ENABLE BIT(0)
#define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1)
#define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4)
#define USB_R3_P30_REF_SSP_EN BIT(13)
#define USB_R4 0x90
#define USB_R4_P21_PORT_RESET_0 BIT(0)
#define USB_R4_P21_SLEEP_M0 BIT(1)
#define USB_R4_MEM_PD_MASK GENMASK(3, 2)
#define USB_R4_P21_ONLY BIT(4)
#define USB_R5 0x94
#define USB_R5_ID_DIG_SYNC BIT(0)
#define USB_R5_ID_DIG_REG BIT(1)
#define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2)
#define USB_R5_ID_DIG_EN_0 BIT(4)
#define USB_R5_ID_DIG_EN_1 BIT(5)
#define USB_R5_ID_DIG_CURR BIT(6)
#define USB_R5_ID_DIG_IRQ BIT(7)
#define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8)
#define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16)
enum {
USB2_HOST_PHY = 0,
USB2_OTG_PHY,
USB3_HOST_PHY,
PHY_COUNT,
};
static const char *phy_names[PHY_COUNT] = {
"usb2-phy0", "usb2-phy1", "usb3-phy0",
};
struct dwc3_meson_g12a {
struct udevice *dev;
struct regmap *regmap;
struct clk clk;
struct reset_ctl reset;
struct phy phys[PHY_COUNT];
enum usb_dr_mode otg_mode;
enum usb_dr_mode otg_phy_mode;
unsigned int usb2_ports;
unsigned int usb3_ports;
#if CONFIG_IS_ENABLED(DM_REGULATOR)
struct udevice *vbus_supply;
#endif
};
#define U2P_REG_SIZE 0x20
#define USB_REG_OFFSET 0x80
static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv,
int i, enum usb_dr_mode mode)
{
switch (mode) {
case USB_DR_MODE_HOST:
case USB_DR_MODE_OTG:
case USB_DR_MODE_UNKNOWN:
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_HOST_DEVICE,
U2P_R0_HOST_DEVICE);
break;
case USB_DR_MODE_PERIPHERAL:
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_HOST_DEVICE, 0);
break;
}
}
static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
{
int i;
if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
priv->otg_phy_mode = USB_DR_MODE_PERIPHERAL;
else
priv->otg_phy_mode = USB_DR_MODE_HOST;
for (i = 0 ; i < USB3_HOST_PHY ; ++i) {
if (!priv->phys[i].dev)
continue;
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_POWER_ON_RESET,
U2P_R0_POWER_ON_RESET);
if (i == USB2_OTG_PHY) {
regmap_update_bits(priv->regmap,
U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS);
dwc3_meson_g12a_usb2_set_mode(priv, i,
priv->otg_phy_mode);
} else
dwc3_meson_g12a_usb2_set_mode(priv, i,
USB_DR_MODE_HOST);
regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
U2P_R0_POWER_ON_RESET, 0);
}
return 0;
}
static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv)
{
regmap_update_bits(priv->regmap, USB_R3,
USB_R3_P30_SSC_RANGE_MASK |
USB_R3_P30_REF_SSP_EN,
USB_R3_P30_SSC_ENABLE |
FIELD_PREP(USB_R3_P30_SSC_RANGE_MASK, 2) |
USB_R3_P30_REF_SSP_EN);
udelay(2);
regmap_update_bits(priv->regmap, USB_R2,
USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK,
FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK, 0x15));
regmap_update_bits(priv->regmap, USB_R2,
USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK,
FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK, 0x20));
udelay(2);
regmap_update_bits(priv->regmap, USB_R1,
USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT,
USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT);
regmap_update_bits(priv->regmap, USB_R1,
USB_R1_P30_PCS_TX_SWING_FULL_MASK,
FIELD_PREP(USB_R1_P30_PCS_TX_SWING_FULL_MASK, 127));
}
static void dwc3_meson_g12a_usb_init_mode(struct dwc3_meson_g12a *priv)
{
if (priv->otg_phy_mode == USB_DR_MODE_PERIPHERAL) {
regmap_update_bits(priv->regmap, USB_R0,
USB_R0_U2D_ACT, USB_R0_U2D_ACT);
regmap_update_bits(priv->regmap, USB_R0,
USB_R0_U2D_SS_SCALEDOWN_MODE_MASK, 0);
regmap_update_bits(priv->regmap, USB_R4,
USB_R4_P21_SLEEP_M0, USB_R4_P21_SLEEP_M0);
} else {
regmap_update_bits(priv->regmap, USB_R0,
USB_R0_U2D_ACT, 0);
regmap_update_bits(priv->regmap, USB_R4,
USB_R4_P21_SLEEP_M0, 0);
}
}
static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
{
int ret;
ret = dwc3_meson_g12a_usb2_init(priv);
if (ret)
return ret;
regmap_update_bits(priv->regmap, USB_R1,
USB_R1_U3H_FLADJ_30MHZ_REG_MASK,
FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20));
regmap_update_bits(priv->regmap, USB_R5,
USB_R5_ID_DIG_EN_0,
USB_R5_ID_DIG_EN_0);
regmap_update_bits(priv->regmap, USB_R5,
USB_R5_ID_DIG_EN_1,
USB_R5_ID_DIG_EN_1);
regmap_update_bits(priv->regmap, USB_R5,
USB_R5_ID_DIG_TH_MASK,
FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff));
/* If we have an actual SuperSpeed port, initialize it */
if (priv->usb3_ports)
dwc3_meson_g12a_usb3_init(priv);
dwc3_meson_g12a_usb_init_mode(priv);
return 0;
}
int dwc3_meson_g12a_force_mode(struct udevice *dev, enum usb_dr_mode mode)
{
struct dwc3_meson_g12a *priv = dev_get_plat(dev);
if (!priv)
return -EINVAL;
if (mode != USB_DR_MODE_HOST && mode != USB_DR_MODE_PERIPHERAL)
return -EINVAL;
if (!priv->phys[USB2_OTG_PHY].dev)
return -EINVAL;
if (mode == USB_DR_MODE_HOST)
debug("%s: switching to Host Mode\n", __func__);
else
debug("%s: switching to Device Mode\n", __func__);
#if CONFIG_IS_ENABLED(DM_REGULATOR)
if (priv->vbus_supply) {
int ret = regulator_set_enable(priv->vbus_supply,
(mode == USB_DR_MODE_PERIPHERAL));
if (ret)
return ret;
}
#endif
priv->otg_phy_mode = mode;
dwc3_meson_g12a_usb2_set_mode(priv, USB2_OTG_PHY, mode);
dwc3_meson_g12a_usb_init_mode(priv);
return 0;
}
static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
{
int i, ret;
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = generic_phy_get_by_name(priv->dev, phy_names[i],
&priv->phys[i]);
if (ret == -ENOENT || ret == -ENODATA)
continue;
if (ret)
return ret;
if (i == USB3_HOST_PHY)
priv->usb3_ports++;
else
priv->usb2_ports++;
}
debug("%s: usb2 ports: %d\n", __func__, priv->usb2_ports);
debug("%s: usb3 ports: %d\n", __func__, priv->usb3_ports);
return 0;
}
static int dwc3_meson_g12a_reset_init(struct dwc3_meson_g12a *priv)
{
int ret;
ret = reset_get_by_index(priv->dev, 0, &priv->reset);
if (ret)
return ret;
ret = reset_assert(&priv->reset);
udelay(1);
ret |= reset_deassert(&priv->reset);
if (ret) {
reset_free(&priv->reset);
return ret;
}
return 0;
}
static int dwc3_meson_g12a_clk_init(struct dwc3_meson_g12a *priv)
{
int ret;
ret = clk_get_by_index(priv->dev, 0, &priv->clk);
if (ret)
return ret;
#if CONFIG_IS_ENABLED(CLK)
ret = clk_enable(&priv->clk);
if (ret) {
clk_free(&priv->clk);
return ret;
}
#endif
return 0;
}
static int dwc3_meson_g12a_probe(struct udevice *dev)
{
struct dwc3_meson_g12a *priv = dev_get_plat(dev);
int ret, i;
priv->dev = dev;
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
if (ret)
return ret;
ret = dwc3_meson_g12a_clk_init(priv);
if (ret)
return ret;
ret = dwc3_meson_g12a_reset_init(priv);
if (ret)
return ret;
ret = dwc3_meson_g12a_get_phys(priv);
if (ret)
return ret;
#if CONFIG_IS_ENABLED(DM_REGULATOR)
ret = device_get_supply_regulator(dev, "vbus-supply",
&priv->vbus_supply);
if (ret && ret != -ENOENT) {
pr_err("Failed to get PHY regulator\n");
return ret;
}
if (priv->vbus_supply) {
ret = regulator_set_enable(priv->vbus_supply, true);
if (ret)
return ret;
}
#endif
priv->otg_mode = usb_get_dr_mode(dev_ofnode(dev));
ret = dwc3_meson_g12a_usb_init(priv);
if (ret)
return ret;
for (i = 0 ; i < PHY_COUNT ; ++i) {
if (!priv->phys[i].dev)
continue;
ret = generic_phy_init(&priv->phys[i]);
if (ret)
goto err_phy_init;
}
for (i = 0; i < PHY_COUNT; ++i) {
if (!priv->phys[i].dev)
continue;
ret = generic_phy_power_on(&priv->phys[i]);
if (ret)
goto err_phy_init;
}
return 0;
err_phy_init:
for (i = 0 ; i < PHY_COUNT ; ++i) {
if (!priv->phys[i].dev)
continue;
generic_phy_exit(&priv->phys[i]);
}
return ret;
}
static int dwc3_meson_g12a_remove(struct udevice *dev)
{
struct dwc3_meson_g12a *priv = dev_get_plat(dev);
int i;
reset_release_all(&priv->reset, 1);
clk_release_all(&priv->clk, 1);
for (i = 0; i < PHY_COUNT; ++i) {
if (!priv->phys[i].dev)
continue;
generic_phy_power_off(&priv->phys[i]);
}
for (i = 0 ; i < PHY_COUNT ; ++i) {
if (!priv->phys[i].dev)
continue;
generic_phy_exit(&priv->phys[i]);
}
return dm_scan_fdt_dev(dev);
}
static const struct udevice_id dwc3_meson_g12a_ids[] = {
{ .compatible = "amlogic,meson-g12a-usb-ctrl" },
{ }
};
U_BOOT_DRIVER(dwc3_generic_wrapper) = {
.name = "dwc3-meson-g12a",
.id = UCLASS_SIMPLE_BUS,
.of_match = dwc3_meson_g12a_ids,
.probe = dwc3_meson_g12a_probe,
.remove = dwc3_meson_g12a_remove,
.plat_auto = sizeof(struct dwc3_meson_g12a),
};