| /* |
| * Vitesse PHY drivers |
| * |
| * Copyright 2010-2012 Freescale Semiconductor, Inc. |
| * Author: Andy Fleming |
| * Add vsc8662 phy support - Priyanka Jain |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <miiphy.h> |
| |
| /* Cicada Auxiliary Control/Status Register */ |
| #define MIIM_CIS82xx_AUX_CONSTAT 0x1c |
| #define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004 |
| #define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020 |
| #define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018 |
| #define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010 |
| #define MIIM_CIS82xx_AUXCONSTAT_100 0x0008 |
| |
| /* Cicada Extended Control Register 1 */ |
| #define MIIM_CIS82xx_EXT_CON1 0x17 |
| #define MIIM_CIS8201_EXTCON1_INIT 0x0000 |
| |
| /* Cicada 8204 Extended PHY Control Register 1 */ |
| #define MIIM_CIS8204_EPHY_CON 0x17 |
| #define MIIM_CIS8204_EPHYCON_INIT 0x0006 |
| #define MIIM_CIS8204_EPHYCON_RGMII 0x1100 |
| |
| /* Cicada 8204 Serial LED Control Register */ |
| #define MIIM_CIS8204_SLED_CON 0x1b |
| #define MIIM_CIS8204_SLEDCON_INIT 0x1115 |
| |
| /* Vitesse VSC8601 Extended PHY Control Register 1 */ |
| #define MIIM_VSC8601_EPHY_CON 0x17 |
| #define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 |
| #define MIIM_VSC8601_SKEW_CTRL 0x1c |
| |
| #define PHY_EXT_PAGE_ACCESS 0x1f |
| #define PHY_EXT_PAGE_ACCESS_GENERAL 0x10 |
| #define PHY_EXT_PAGE_ACCESS_EXTENDED3 0x3 |
| |
| /* Vitesse VSC8574 control register */ |
| #define MIIM_VSC8574_MAC_SERDES_CON 0x10 |
| #define MIIM_VSC8574_MAC_SERDES_ANEG 0x80 |
| #define MIIM_VSC8574_GENERAL18 0x12 |
| #define MIIM_VSC8574_GENERAL19 0x13 |
| |
| /* Vitesse VSC8574 gerenal purpose register 18 */ |
| #define MIIM_VSC8574_18G_SGMII 0x80f0 |
| #define MIIM_VSC8574_18G_QSGMII 0x80e0 |
| #define MIIM_VSC8574_18G_CMDSTAT 0x8000 |
| |
| /* Vitesse VSC8514 control register */ |
| #define MIIM_VSC8514_GENERAL18 0x12 |
| #define MIIM_VSC8514_GENERAL19 0x13 |
| #define MIIM_VSC8514_GENERAL23 0x17 |
| |
| /* Vitesse VSC8514 gerenal purpose register 18 */ |
| #define MIIM_VSC8514_18G_QSGMII 0x80e0 |
| #define MIIM_VSC8514_18G_CMDSTAT 0x8000 |
| |
| /* Vitesse VSC8664 Control/Status Register */ |
| #define MIIM_VSC8664_SERDES_AND_SIGDET 0x13 |
| #define MIIM_VSC8664_ADDITIONAL_DEV 0x16 |
| #define MIIM_VSC8664_EPHY_CON 0x17 |
| #define MIIM_VSC8664_LED_CON 0x1E |
| |
| #define PHY_EXT_PAGE_ACCESS_EXTENDED 0x0001 |
| |
| /* CIS8201 */ |
| static int vitesse_config(struct phy_device *phydev) |
| { |
| /* Override PHY config settings */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT, |
| MIIM_CIS82xx_AUXCONSTAT_INIT); |
| /* Set up the interface mode */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1, |
| MIIM_CIS8201_EXTCON1_INIT); |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| static int vitesse_parse_status(struct phy_device *phydev) |
| { |
| int speed; |
| int mii_reg; |
| |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT); |
| |
| if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX) |
| phydev->duplex = DUPLEX_FULL; |
| else |
| phydev->duplex = DUPLEX_HALF; |
| |
| speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED; |
| switch (speed) { |
| case MIIM_CIS82xx_AUXCONSTAT_GBIT: |
| phydev->speed = SPEED_1000; |
| break; |
| case MIIM_CIS82xx_AUXCONSTAT_100: |
| phydev->speed = SPEED_100; |
| break; |
| default: |
| phydev->speed = SPEED_10; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int vitesse_startup(struct phy_device *phydev) |
| { |
| genphy_update_link(phydev); |
| vitesse_parse_status(phydev); |
| |
| return 0; |
| } |
| |
| static int cis8204_config(struct phy_device *phydev) |
| { |
| /* Override PHY config settings */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT, |
| MIIM_CIS82xx_AUXCONSTAT_INIT); |
| |
| genphy_config_aneg(phydev); |
| |
| if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| (phydev->interface == PHY_INTERFACE_MODE_RGMII) || |
| (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) || |
| (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)) |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON, |
| MIIM_CIS8204_EPHYCON_INIT | |
| MIIM_CIS8204_EPHYCON_RGMII); |
| else |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON, |
| MIIM_CIS8204_EPHYCON_INIT); |
| |
| return 0; |
| } |
| |
| /* Vitesse VSC8601 */ |
| static int vsc8601_config(struct phy_device *phydev) |
| { |
| /* Configure some basic stuff */ |
| #ifdef CONFIG_SYS_VSC8601_SKEWFIX |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON, |
| MIIM_VSC8601_EPHY_CON_INIT_SKEW); |
| #if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX) |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1); |
| #define VSC8101_SKEW \ |
| ((CONFIG_SYS_VSC8601_SKEW_TX << 14) \ |
| | (CONFIG_SYS_VSC8601_SKEW_RX << 12)) |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL, |
| VSC8101_SKEW); |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); |
| #endif |
| #endif |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| static int vsc8574_config(struct phy_device *phydev) |
| { |
| u32 val; |
| /* configure register 19G for MAC */ |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, |
| PHY_EXT_PAGE_ACCESS_GENERAL); |
| |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19); |
| if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { |
| /* set bit 15:14 to '01' for QSGMII mode */ |
| val = (val & 0x3fff) | (1 << 14); |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MIIM_VSC8574_GENERAL19, val); |
| /* Enable 4 ports MAC QSGMII */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18, |
| MIIM_VSC8574_18G_QSGMII); |
| } else { |
| /* set bit 15:14 to '00' for SGMII mode */ |
| val = val & 0x3fff; |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val); |
| /* Enable 4 ports MAC SGMII */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18, |
| MIIM_VSC8574_18G_SGMII); |
| } |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18); |
| /* When bit 15 is cleared the command has completed */ |
| while (val & MIIM_VSC8574_18G_CMDSTAT) |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18); |
| |
| /* Enable Serdes Auto-negotiation */ |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, |
| PHY_EXT_PAGE_ACCESS_EXTENDED3); |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON); |
| val = val | MIIM_VSC8574_MAC_SERDES_ANEG; |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| static int vsc8514_config(struct phy_device *phydev) |
| { |
| u32 val; |
| int timeout = 1000000; |
| |
| /* configure register to access 19G */ |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, |
| PHY_EXT_PAGE_ACCESS_GENERAL); |
| |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19); |
| if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { |
| /* set bit 15:14 to '01' for QSGMII mode */ |
| val = (val & 0x3fff) | (1 << 14); |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MIIM_VSC8514_GENERAL19, val); |
| /* Enable 4 ports MAC QSGMII */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18, |
| MIIM_VSC8514_18G_QSGMII); |
| } else { |
| /*TODO Add SGMII functionality once spec sheet |
| * for VSC8514 defines complete functionality |
| */ |
| } |
| |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18); |
| /* When bit 15 is cleared the command has completed */ |
| while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--) |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18); |
| |
| if (0 == timeout) { |
| printf("PHY 8514 config failed\n"); |
| return -1; |
| } |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); |
| |
| /* configure register to access 23 */ |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23); |
| /* set bits 10:8 to '000' */ |
| val = (val & 0xf8ff); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val); |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| static int vsc8664_config(struct phy_device *phydev) |
| { |
| u32 val; |
| |
| /* Enable MAC interface auto-negotiation */ |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON); |
| val |= (1 << 13); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON, val); |
| |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, |
| PHY_EXT_PAGE_ACCESS_EXTENDED); |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET); |
| val |= (1 << 11); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET, val); |
| phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); |
| |
| /* Enable LED blink */ |
| val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON); |
| val &= ~(1 << 2); |
| phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON, val); |
| |
| genphy_config_aneg(phydev); |
| |
| return 0; |
| } |
| |
| static struct phy_driver VSC8211_driver = { |
| .name = "Vitesse VSC8211", |
| .uid = 0xfc4b0, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &vitesse_config, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8221_driver = { |
| .name = "Vitesse VSC8221", |
| .uid = 0xfc550, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &genphy_config_aneg, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8244_driver = { |
| .name = "Vitesse VSC8244", |
| .uid = 0xfc6c0, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &genphy_config_aneg, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8234_driver = { |
| .name = "Vitesse VSC8234", |
| .uid = 0xfc620, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &genphy_config_aneg, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8574_driver = { |
| .name = "Vitesse VSC8574", |
| .uid = 0x704a0, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &vsc8574_config, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8514_driver = { |
| .name = "Vitesse VSC8514", |
| .uid = 0x70670, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &vsc8514_config, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8601_driver = { |
| .name = "Vitesse VSC8601", |
| .uid = 0x70420, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &vsc8601_config, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8641_driver = { |
| .name = "Vitesse VSC8641", |
| .uid = 0x70430, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &genphy_config_aneg, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8662_driver = { |
| .name = "Vitesse VSC8662", |
| .uid = 0x70660, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &genphy_config_aneg, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver VSC8664_driver = { |
| .name = "Vitesse VSC8664", |
| .uid = 0x70660, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &vsc8664_config, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| /* Vitesse bought Cicada, so we'll put these here */ |
| static struct phy_driver cis8201_driver = { |
| .name = "CIS8201", |
| .uid = 0xfc410, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &vitesse_config, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| static struct phy_driver cis8204_driver = { |
| .name = "Cicada Cis8204", |
| .uid = 0xfc440, |
| .mask = 0xffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &cis8204_config, |
| .startup = &vitesse_startup, |
| .shutdown = &genphy_shutdown, |
| }; |
| |
| int phy_vitesse_init(void) |
| { |
| phy_register(&VSC8641_driver); |
| phy_register(&VSC8601_driver); |
| phy_register(&VSC8234_driver); |
| phy_register(&VSC8244_driver); |
| phy_register(&VSC8211_driver); |
| phy_register(&VSC8221_driver); |
| phy_register(&VSC8574_driver); |
| phy_register(&VSC8514_driver); |
| phy_register(&VSC8662_driver); |
| phy_register(&VSC8664_driver); |
| phy_register(&cis8201_driver); |
| phy_register(&cis8204_driver); |
| |
| return 0; |
| } |