| /* This file is generated by Preloader Generator */ |
| |
| #ifndef _PRELOADER_PINMUX_CONFIG_H_ |
| #define _PRELOADER_PINMUX_CONFIG_H_ |
| |
| /* |
| * State of enabling for which IP connected out through the muxing. |
| * Value 1 mean the IP connection is muxed out |
| */ |
| #define CONFIG_HPS_EMAC0 (1) |
| #define CONFIG_HPS_EMAC1 (0) |
| #define CONFIG_HPS_USB0 (0) |
| #define CONFIG_HPS_USB1 (1) |
| #define CONFIG_HPS_NAND (0) |
| #define CONFIG_HPS_SDMMC (1) |
| #define CONFIG_HPS_QSPI (0) |
| #define CONFIG_HPS_UART0 (1) |
| #define CONFIG_HPS_UART1 (0) |
| #define CONFIG_HPS_TRACE (0) |
| #define CONFIG_HPS_I2C0 (1) |
| #define CONFIG_HPS_I2C1 (0) |
| #define CONFIG_HPS_I2C2 (0) |
| #define CONFIG_HPS_I2C3 (0) |
| #define CONFIG_HPS_SPIM0 (0) |
| #define CONFIG_HPS_SPIM1 (0) |
| #define CONFIG_HPS_SPIS0 (0) |
| #define CONFIG_HPS_SPIS1 (0) |
| #define CONFIG_HPS_CAN0 (1) |
| #define CONFIG_HPS_CAN1 (0) |
| |
| /* IP attribute value (which affected by pin muxing configuration) */ |
| #define CONFIG_HPS_SDMMC_BUSWIDTH (8) |
| |
| /* 1 if the pins are connected out */ |
| #define CONFIG_HPS_QSPI_CS0 (0) |
| #define CONFIG_HPS_QSPI_CS1 (0) |
| #define CONFIG_HPS_QSPI_CS2 (0) |
| #define CONFIG_HPS_QSPI_CS3 (0) |
| |
| /* UART */ |
| /* 1 means the pin is mux out or available */ |
| #define CONFIG_HPS_UART0_TX (1) |
| #define CONFIG_HPS_UART0_RX (1) |
| #define CONFIG_HPS_UART0_CTS (0) |
| #define CONFIG_HPS_UART0_RTS (0) |
| #define CONFIG_HPS_UART1_TX (0) |
| #define CONFIG_HPS_UART1_RX (0) |
| #define CONFIG_HPS_UART1_CTS (0) |
| #define CONFIG_HPS_UART1_RTS (0) |
| |
| /* Pin mux data */ |
| #define CONFIG_HPS_PINMUX_NUM (207) |
| |
| #endif /* _PRELOADER_PINMUX_CONFIG_H_ */ |