common/image-fdt.c - github/trini/u-boot - Gitiles

 /*
  * Copyright (c) 2013, Google Inc.
  *
  * (C) Copyright 2008 Semihalf
  *
  * (C) Copyright 2000-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <fdt_support.h>
 #include <errno.h>
 #include <image.h>
 #include <libfdt.h>
 #include <asm/io.h>

 #ifndef CONFIG_SYS_FDT_PAD
 #define CONFIG_SYS_FDT_PAD 0x3000
 #endif

 DECLARE_GLOBAL_DATA_PTR;

 static void fdt_error(const char *msg)
 {
 	puts("ERROR: ");
 	puts(msg);
 	puts(" - must RESET the board to recover.\n");
 }

 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
 static const image_header_t *image_get_fdt(ulong fdt_addr)
 {
 	const image_header_t *fdt_hdr = map_sysmem(fdt_addr, 0);

 	image_print_contents(fdt_hdr);

 	puts("   Verifying Checksum ... ");
 	if (!image_check_hcrc(fdt_hdr)) {
 		fdt_error("fdt header checksum invalid");
 		return NULL;
 	}

 	if (!image_check_dcrc(fdt_hdr)) {
 		fdt_error("fdt checksum invalid");
 		return NULL;
 	}
 	puts("OK\n");

 	if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) {
 		fdt_error("uImage is not a fdt");
 		return NULL;
 	}
 	if (image_get_comp(fdt_hdr) != IH_COMP_NONE) {
 		fdt_error("uImage is compressed");
 		return NULL;
 	}
 	if (fdt_check_header((void *)image_get_data(fdt_hdr)) != 0) {
 		fdt_error("uImage data is not a fdt");
 		return NULL;
 	}
 	return fdt_hdr;
 }
 #endif

 /**
  * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable
  * @lmb: pointer to lmb handle, will be used for memory mgmt
  * @fdt_blob: pointer to fdt blob base address
  *
  * Adds the memreserve regions in the dtb to the lmb block.  Adding the
  * memreserve regions prevents u-boot from using them to store the initrd
  * or the fdt blob.
  */
 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob)
 {
 	uint64_t addr, size;
 	int i, total;

 	if (fdt_check_header(fdt_blob) != 0)
 		return;

 	total = fdt_num_mem_rsv(fdt_blob);
 	for (i = 0; i < total; i++) {
 		if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
 			continue;
 		printf("   reserving fdt memory region: addr=%llx size=%llx\n",
 		       (unsigned long long)addr, (unsigned long long)size);
 		lmb_reserve(lmb, addr, size);
 	}
 }

 /**
  * boot_relocate_fdt - relocate flat device tree
  * @lmb: pointer to lmb handle, will be used for memory mgmt
  * @of_flat_tree: pointer to a char* variable, will hold fdt start address
  * @of_size: pointer to a ulong variable, will hold fdt length
  *
  * boot_relocate_fdt() allocates a region of memory within the bootmap and
  * relocates the of_flat_tree into that region, even if the fdt is already in
  * the bootmap.  It also expands the size of the fdt by CONFIG_SYS_FDT_PAD
  * bytes.
  *
  * of_flat_tree and of_size are set to final (after relocation) values
  *
  * returns:
  *      0 - success
  *      1 - failure
  */
 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
 {
 	void	*fdt_blob = *of_flat_tree;
 	void	*of_start = NULL;
 	char	*fdt_high;
 	ulong	of_len = 0;
 	int	err;
 	int	disable_relocation = 0;

 	/* nothing to do */
 	if (*of_size == 0)
 		return 0;

 	if (fdt_check_header(fdt_blob) != 0) {
 		fdt_error("image is not a fdt");
 		goto error;
 	}

 	/* position on a 4K boundary before the alloc_current */
 	/* Pad the FDT by a specified amount */
 	of_len = *of_size + CONFIG_SYS_FDT_PAD;

 	/* If fdt_high is set use it to select the relocation address */
 	fdt_high = getenv("fdt_high");
 	if (fdt_high) {
 		void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16);

 		if (((ulong) desired_addr) == ~0UL) {
 			/* All ones means use fdt in place */
 			of_start = fdt_blob;
 			lmb_reserve(lmb, (ulong)of_start, of_len);
 			disable_relocation = 1;
 		} else if (desired_addr) {
 			of_start =
 			    (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
 							   (ulong)desired_addr);
 			if (of_start == NULL) {
 				puts("Failed using fdt_high value for Device Tree");
 				goto error;
 			}
 		} else {
 			of_start =
 			    (void *)(ulong) lmb_alloc(lmb, of_len, 0x1000);
 		}
 	} else {
 		of_start =
 		    (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
 						   getenv_bootm_mapsize()
 						   + getenv_bootm_low());
 	}

 	if (of_start == NULL) {
 		puts("device tree - allocation error\n");
 		goto error;
 	}

 	if (disable_relocation) {
 		/*
 		 * We assume there is space after the existing fdt to use
 		 * for padding
 		 */
 		fdt_set_totalsize(of_start, of_len);
 		printf("   Using Device Tree in place at %p, end %p\n",
 		       of_start, of_start + of_len - 1);
 	} else {
 		debug("## device tree at %p ... %p (len=%ld [0x%lX])\n",
 		      fdt_blob, fdt_blob + *of_size - 1, of_len, of_len);

 		printf("   Loading Device Tree to %p, end %p ... ",
 		       of_start, of_start + of_len - 1);

 		err = fdt_open_into(fdt_blob, of_start, of_len);
 		if (err != 0) {
 			fdt_error("fdt move failed");
 			goto error;
 		}
 		puts("OK\n");
 	}

 	*of_flat_tree = of_start;
 	*of_size = of_len;

 	set_working_fdt_addr(*of_flat_tree);
 	return 0;

 error:
 	return 1;
 }

 /**
  * boot_get_fdt - main fdt handling routine
  * @argc: command argument count
  * @argv: command argument list
  * @arch: architecture (IH_ARCH_...)
  * @images: pointer to the bootm images structure
  * @of_flat_tree: pointer to a char* variable, will hold fdt start address
  * @of_size: pointer to a ulong variable, will hold fdt length
  *
  * boot_get_fdt() is responsible for finding a valid flat device tree image.
  * Curently supported are the following ramdisk sources:
  *      - multicomponent kernel/ramdisk image,
  *      - commandline provided address of decicated ramdisk image.
  *
  * returns:
  *     0, if fdt image was found and valid, or skipped
  *     of_flat_tree and of_size are set to fdt start address and length if
  *     fdt image is found and valid
  *
  *     1, if fdt image is found but corrupted
  *     of_flat_tree and of_size are set to 0 if no fdt exists
  */
 int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
 		bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
 {
 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
 	const image_header_t *fdt_hdr;
 	ulong		load, load_end;
 	ulong		image_start, image_data, image_end;
 #endif
 	ulong		fdt_addr;
 	char		*fdt_blob = NULL;
 	void		*buf;
 #if defined(CONFIG_FIT)
 	const char	*fit_uname_config = images->fit_uname_cfg;
 	const char	*fit_uname_fdt = NULL;
 	ulong		default_addr;
 	int		fdt_noffset;
 #endif
 	const char *select = NULL;

 	*of_flat_tree = NULL;
 	*of_size = 0;

 	if (argc > 2)
 		select = argv[2];
 	if (select || genimg_has_config(images)) {
 #if defined(CONFIG_FIT)
 		if (select) {
 			/*
 			 * If the FDT blob comes from the FIT image and the
 			 * FIT image address is omitted in the command line
 			 * argument, try to use ramdisk or os FIT image
 			 * address or default load address.
 			 */
 			if (images->fit_uname_rd)
 				default_addr = (ulong)images->fit_hdr_rd;
 			else if (images->fit_uname_os)
 				default_addr = (ulong)images->fit_hdr_os;
 			else
 				default_addr = load_addr;

 			if (fit_parse_conf(select, default_addr,
 					   &fdt_addr, &fit_uname_config)) {
 				debug("*  fdt: config '%s' from image at 0x%08lx\n",
 				      fit_uname_config, fdt_addr);
 			} else if (fit_parse_subimage(select, default_addr,
 				   &fdt_addr, &fit_uname_fdt)) {
 				debug("*  fdt: subimage '%s' from image at 0x%08lx\n",
 				      fit_uname_fdt, fdt_addr);
 			} else
 #endif
 			{
 				fdt_addr = simple_strtoul(select, NULL, 16);
 				debug("*  fdt: cmdline image address = 0x%08lx\n",
 				      fdt_addr);
 			}
 #if defined(CONFIG_FIT)
 		} else {
 			/* use FIT configuration provided in first bootm
 			 * command argument
 			 */
 			fdt_addr = map_to_sysmem(images->fit_hdr_os);
 			fdt_noffset = fit_get_node_from_config(images,
 							       FIT_FDT_PROP,
 							       fdt_addr);
 			if (fdt_noffset == -ENOLINK)
 				return 0;
 			else if (fdt_noffset < 0)
 				return 1;
 		}
 #endif
 		debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
 		      fdt_addr);

 		/* copy from dataflash if needed */
 		fdt_addr = genimg_get_image(fdt_addr);

 		/*
 		 * Check if there is an FDT image at the
 		 * address provided in the second bootm argument
 		 * check image type, for FIT images get a FIT node.
 		 */
 		buf = map_sysmem(fdt_addr, 0);
 		switch (genimg_get_format(buf)) {
 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
 		case IMAGE_FORMAT_LEGACY:
 			/* verify fdt_addr points to a valid image header */
 			printf("## Flattened Device Tree from Legacy Image at %08lx\n",
 			       fdt_addr);
 			fdt_hdr = image_get_fdt(fdt_addr);
 			if (!fdt_hdr)
 				goto error;

 			/*
 			 * move image data to the load address,
 			 * make sure we don't overwrite initial image
 			 */
 			image_start = (ulong)fdt_hdr;
 			image_data = (ulong)image_get_data(fdt_hdr);
 			image_end = image_get_image_end(fdt_hdr);

 			load = image_get_load(fdt_hdr);
 			load_end = load + image_get_data_size(fdt_hdr);

 			if (load == image_start ||
 			    load == image_data) {
 				fdt_blob = (char *)image_data;
 				break;
 			}

 			if ((load < image_end) && (load_end > image_start)) {
 				fdt_error("fdt overwritten");
 				goto error;
 			}

 			debug("   Loading FDT from 0x%08lx to 0x%08lx\n",
 			      image_data, load);

 			memmove((void *)load,
 				(void *)image_data,
 				image_get_data_size(fdt_hdr));

 			fdt_addr = load;
 			break;
 #endif
 		case IMAGE_FORMAT_FIT:
 			/*
 			 * This case will catch both: new uImage format
 			 * (libfdt based) and raw FDT blob (also libfdt
 			 * based).
 			 */
 #if defined(CONFIG_FIT)
 			/* check FDT blob vs FIT blob */
 			if (fit_check_format(buf)) {
 				ulong load, len;

 				fdt_noffset = fit_image_load(images,
 					fdt_addr, &fit_uname_fdt,
 					&fit_uname_config,
 					arch, IH_TYPE_FLATDT,
 					BOOTSTAGE_ID_FIT_FDT_START,
 					FIT_LOAD_OPTIONAL, &load, &len);

 				images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
 				images->fit_uname_fdt = fit_uname_fdt;
 				images->fit_noffset_fdt = fdt_noffset;
 				fdt_addr = load;
 				break;
 			} else
 #endif
 			{
 				/*
 				 * FDT blob
 				 */
 				debug("*  fdt: raw FDT blob\n");
 				printf("## Flattened Device Tree blob at %08lx\n",
 				       (long)fdt_addr);
 			}
 			break;
 		default:
 			puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
 			goto error;
 		}

 		printf("   Booting using the fdt blob at %#08lx\n", fdt_addr);
 		fdt_blob = map_sysmem(fdt_addr, 0);
 	} else if (images->legacy_hdr_valid &&
 			image_check_type(&images->legacy_hdr_os_copy,
 					 IH_TYPE_MULTI)) {
 		ulong fdt_data, fdt_len;

 		/*
 		 * Now check if we have a legacy multi-component image,
 		 * get second entry data start address and len.
 		 */
 		printf("## Flattened Device Tree from multi component Image at %08lX\n",
 		       (ulong)images->legacy_hdr_os);

 		image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data,
 				   &fdt_len);
 		if (fdt_len) {
 			fdt_blob = (char *)fdt_data;
 			printf("   Booting using the fdt at 0x%p\n", fdt_blob);

 			if (fdt_check_header(fdt_blob) != 0) {
 				fdt_error("image is not a fdt");
 				goto error;
 			}

 			if (fdt_totalsize(fdt_blob) != fdt_len) {
 				fdt_error("fdt size != image size");
 				goto error;
 			}
 		} else {
 			debug("## No Flattened Device Tree\n");
 			return 0;
 		}
 	} else {
 		debug("## No Flattened Device Tree\n");
 		return 0;
 	}

 	*of_flat_tree = fdt_blob;
 	*of_size = fdt_totalsize(fdt_blob);
 	debug("   of_flat_tree at 0x%08lx size 0x%08lx\n",
 	      (ulong)*of_flat_tree, *of_size);

 	return 0;

 error:
 	*of_flat_tree = NULL;
 	*of_size = 0;
 	return 1;
 }

 /*
  * Verify the device tree.
  *
  * This function is called after all device tree fix-ups have been enacted,
  * so that the final device tree can be verified.  The definition of "verified"
  * is up to the specific implementation.  However, it generally means that the
  * addresses of some of the devices in the device tree are compared with the
  * actual addresses at which U-Boot has placed them.
  *
  * Returns 1 on success, 0 on failure.  If 0 is returned, U-boot will halt the
  * boot process.
  */
 __weak int ft_verify_fdt(void *fdt)
 {
 	return 1;
 }

 __weak int arch_fixup_fdt(void *blob)
 {
 	return 0;
 }

 int image_setup_libfdt(bootm_headers_t *images, void *blob,
 		       int of_size, struct lmb *lmb)
 {
 	ulong *initrd_start = &images->initrd_start;
 	ulong *initrd_end = &images->initrd_end;
 	int ret;

 	if (fdt_chosen(blob) < 0) {
 		puts("ERROR: /chosen node create failed");
 		puts(" - must RESET the board to recover.\n");
 		return -1;
 	}
 	if (arch_fixup_fdt(blob) < 0) {
 		puts("ERROR: arch specific fdt fixup failed");
 		return -1;
 	}
 	if (IMAGE_OF_BOARD_SETUP)
 		ft_board_setup(blob, gd->bd);
 	fdt_fixup_ethernet(blob);

 	/* Delete the old LMB reservation */
 	lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob,
 		 (phys_size_t)fdt_totalsize(blob));

 	ret = fdt_shrink_to_minimum(blob);
 	if (ret < 0)
 		return ret;
 	of_size = ret;

 	if (*initrd_start && *initrd_end) {
 		of_size += FDT_RAMDISK_OVERHEAD;
 		fdt_set_totalsize(blob, of_size);
 	}
 	/* Create a new LMB reservation */
 	lmb_reserve(lmb, (ulong)blob, of_size);

 	fdt_initrd(blob, *initrd_start, *initrd_end);
 	if (!ft_verify_fdt(blob))
 		return -1;

 #if defined(CONFIG_SOC_KEYSTONE)
 	if (IMAGE_OF_BOARD_SETUP)
 		ft_board_setup_ex(blob, gd->bd);
 #endif

 	return 0;
 }
	/*
	* Copyright (c) 2013, Google Inc.
	*
	* (C) Copyright 2008 Semihalf
	*
	* (C) Copyright 2000-2006
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <fdt_support.h>
	#include <errno.h>
	#include <image.h>
	#include <libfdt.h>
	#include <asm/io.h>

	#ifndef CONFIG_SYS_FDT_PAD
	#define CONFIG_SYS_FDT_PAD 0x3000
	#endif

	DECLARE_GLOBAL_DATA_PTR;

	static void fdt_error(const char *msg)
	{
	puts("ERROR: ");
	puts(msg);
	puts(" - must RESET the board to recover.\n");
	}

	#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
	static const image_header_t *image_get_fdt(ulong fdt_addr)
	{
	const image_header_t *fdt_hdr = map_sysmem(fdt_addr, 0);

	image_print_contents(fdt_hdr);

	puts(" Verifying Checksum ... ");
	if (!image_check_hcrc(fdt_hdr)) {
	fdt_error("fdt header checksum invalid");
	return NULL;
	}

	if (!image_check_dcrc(fdt_hdr)) {
	fdt_error("fdt checksum invalid");
	return NULL;
	}
	puts("OK\n");

	if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) {
	fdt_error("uImage is not a fdt");
	return NULL;
	}
	if (image_get_comp(fdt_hdr) != IH_COMP_NONE) {
	fdt_error("uImage is compressed");
	return NULL;
	}
	if (fdt_check_header((void *)image_get_data(fdt_hdr)) != 0) {
	fdt_error("uImage data is not a fdt");
	return NULL;
	}
	return fdt_hdr;
	}
	#endif

	/**
	* boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable
	* @lmb: pointer to lmb handle, will be used for memory mgmt
	* @fdt_blob: pointer to fdt blob base address
	*
	* Adds the memreserve regions in the dtb to the lmb block. Adding the
	* memreserve regions prevents u-boot from using them to store the initrd
	* or the fdt blob.
	*/
	void boot_fdt_add_mem_rsv_regions(struct lmb lmb, void fdt_blob)
	{
	uint64_t addr, size;
	int i, total;

	if (fdt_check_header(fdt_blob) != 0)
	return;

	total = fdt_num_mem_rsv(fdt_blob);
	for (i = 0; i < total; i++) {
	if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
	continue;
	printf(" reserving fdt memory region: addr=%llx size=%llx\n",
	(unsigned long long)addr, (unsigned long long)size);
	lmb_reserve(lmb, addr, size);
	}
	}

	/**
	* boot_relocate_fdt - relocate flat device tree
	* @lmb: pointer to lmb handle, will be used for memory mgmt
	* @of_flat_tree: pointer to a char* variable, will hold fdt start address
	* @of_size: pointer to a ulong variable, will hold fdt length
	*
	* boot_relocate_fdt() allocates a region of memory within the bootmap and
	* relocates the of_flat_tree into that region, even if the fdt is already in
	* the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD
	* bytes.
	*
	* of_flat_tree and of_size are set to final (after relocation) values
	*
	* returns:
	* 0 - success
	* 1 - failure
	*/
	int boot_relocate_fdt(struct lmb lmb, char of_flat_tree, ulong of_size)
	{
	void fdt_blob = of_flat_tree;
	void *of_start = NULL;
	char *fdt_high;
	ulong of_len = 0;
	int err;
	int disable_relocation = 0;

	/* nothing to do */
	if (*of_size == 0)
	return 0;

	if (fdt_check_header(fdt_blob) != 0) {
	fdt_error("image is not a fdt");
	goto error;
	}

	/* position on a 4K boundary before the alloc_current */
	/* Pad the FDT by a specified amount */
	of_len = *of_size + CONFIG_SYS_FDT_PAD;

	/* If fdt_high is set use it to select the relocation address */
	fdt_high = getenv("fdt_high");
	if (fdt_high) {
	void desired_addr = (void )simple_strtoul(fdt_high, NULL, 16);

	if (((ulong) desired_addr) == ~0UL) {
	/* All ones means use fdt in place */
	of_start = fdt_blob;
	lmb_reserve(lmb, (ulong)of_start, of_len);
	disable_relocation = 1;
	} else if (desired_addr) {
	of_start =
	(void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
	(ulong)desired_addr);
	if (of_start == NULL) {
	puts("Failed using fdt_high value for Device Tree");
	goto error;
	}
	} else {
	of_start =
	(void *)(ulong) lmb_alloc(lmb, of_len, 0x1000);
	}
	} else {
	of_start =
	(void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
	getenv_bootm_mapsize()
	+ getenv_bootm_low());
	}

	if (of_start == NULL) {
	puts("device tree - allocation error\n");
	goto error;
	}

	if (disable_relocation) {
	/*
	* We assume there is space after the existing fdt to use
	* for padding
	*/
	fdt_set_totalsize(of_start, of_len);
	printf(" Using Device Tree in place at %p, end %p\n",
	of_start, of_start + of_len - 1);
	} else {
	debug("## device tree at %p ... %p (len=%ld [0x%lX])\n",
	fdt_blob, fdt_blob + *of_size - 1, of_len, of_len);

	printf(" Loading Device Tree to %p, end %p ... ",
	of_start, of_start + of_len - 1);

	err = fdt_open_into(fdt_blob, of_start, of_len);
	if (err != 0) {
	fdt_error("fdt move failed");
	goto error;
	}
	puts("OK\n");
	}

	*of_flat_tree = of_start;
	*of_size = of_len;

	set_working_fdt_addr(*of_flat_tree);
	return 0;

	error:
	return 1;
	}

	/**
	* boot_get_fdt - main fdt handling routine
	* @argc: command argument count
	* @argv: command argument list
	* @arch: architecture (IH_ARCH_...)
	* @images: pointer to the bootm images structure
	* @of_flat_tree: pointer to a char* variable, will hold fdt start address
	* @of_size: pointer to a ulong variable, will hold fdt length
	*
	* boot_get_fdt() is responsible for finding a valid flat device tree image.
	* Curently supported are the following ramdisk sources:
	* - multicomponent kernel/ramdisk image,
	* - commandline provided address of decicated ramdisk image.
	*
	* returns:
	* 0, if fdt image was found and valid, or skipped
	* of_flat_tree and of_size are set to fdt start address and length if
	* fdt image is found and valid
	*
	* 1, if fdt image is found but corrupted
	* of_flat_tree and of_size are set to 0 if no fdt exists
	*/
	int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
	bootm_headers_t images, char of_flat_tree, ulong of_size)
	{
	#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
	const image_header_t *fdt_hdr;
	ulong load, load_end;
	ulong image_start, image_data, image_end;
	#endif
	ulong fdt_addr;
	char *fdt_blob = NULL;
	void *buf;
	#if defined(CONFIG_FIT)
	const char *fit_uname_config = images->fit_uname_cfg;
	const char *fit_uname_fdt = NULL;
	ulong default_addr;
	int fdt_noffset;
	#endif
	const char *select = NULL;

	*of_flat_tree = NULL;
	*of_size = 0;

	if (argc > 2)
	select = argv[2];
	if (select \|\| genimg_has_config(images)) {
	#if defined(CONFIG_FIT)
	if (select) {
	/*
	* If the FDT blob comes from the FIT image and the
	* FIT image address is omitted in the command line
	* argument, try to use ramdisk or os FIT image
	* address or default load address.
	*/
	if (images->fit_uname_rd)
	default_addr = (ulong)images->fit_hdr_rd;
	else if (images->fit_uname_os)
	default_addr = (ulong)images->fit_hdr_os;
	else
	default_addr = load_addr;

	if (fit_parse_conf(select, default_addr,
	&fdt_addr, &fit_uname_config)) {
	debug("* fdt: config '%s' from image at 0x%08lx\n",
	fit_uname_config, fdt_addr);
	} else if (fit_parse_subimage(select, default_addr,
	&fdt_addr, &fit_uname_fdt)) {
	debug("* fdt: subimage '%s' from image at 0x%08lx\n",
	fit_uname_fdt, fdt_addr);
	} else
	#endif
	{
	fdt_addr = simple_strtoul(select, NULL, 16);
	debug("* fdt: cmdline image address = 0x%08lx\n",
	fdt_addr);
	}
	#if defined(CONFIG_FIT)
	} else {
	/* use FIT configuration provided in first bootm
	* command argument
	*/
	fdt_addr = map_to_sysmem(images->fit_hdr_os);
	fdt_noffset = fit_get_node_from_config(images,
	FIT_FDT_PROP,
	fdt_addr);
	if (fdt_noffset == -ENOLINK)
	return 0;
	else if (fdt_noffset < 0)
	return 1;
	}
	#endif
	debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
	fdt_addr);

	/* copy from dataflash if needed */
	fdt_addr = genimg_get_image(fdt_addr);

	/*
	* Check if there is an FDT image at the
	* address provided in the second bootm argument
	* check image type, for FIT images get a FIT node.
	*/
	buf = map_sysmem(fdt_addr, 0);
	switch (genimg_get_format(buf)) {
	#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
	case IMAGE_FORMAT_LEGACY:
	/* verify fdt_addr points to a valid image header */
	printf("## Flattened Device Tree from Legacy Image at %08lx\n",
	fdt_addr);
	fdt_hdr = image_get_fdt(fdt_addr);
	if (!fdt_hdr)
	goto error;

	/*
	* move image data to the load address,
	* make sure we don't overwrite initial image
	*/
	image_start = (ulong)fdt_hdr;
	image_data = (ulong)image_get_data(fdt_hdr);
	image_end = image_get_image_end(fdt_hdr);

	load = image_get_load(fdt_hdr);
	load_end = load + image_get_data_size(fdt_hdr);

	if (load == image_start \|\|
	load == image_data) {
	fdt_blob = (char *)image_data;
	break;
	}

	if ((load < image_end) && (load_end > image_start)) {
	fdt_error("fdt overwritten");
	goto error;
	}

	debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
	image_data, load);

	memmove((void *)load,
	(void *)image_data,
	image_get_data_size(fdt_hdr));

	fdt_addr = load;
	break;
	#endif
	case IMAGE_FORMAT_FIT:
	/*
	* This case will catch both: new uImage format
	* (libfdt based) and raw FDT blob (also libfdt
	* based).
	*/
	#if defined(CONFIG_FIT)
	/* check FDT blob vs FIT blob */
	if (fit_check_format(buf)) {
	ulong load, len;

	fdt_noffset = fit_image_load(images,
	fdt_addr, &fit_uname_fdt,
	&fit_uname_config,
	arch, IH_TYPE_FLATDT,
	BOOTSTAGE_ID_FIT_FDT_START,
	FIT_LOAD_OPTIONAL, &load, &len);

	images->fit_hdr_fdt = map_sysmem(fdt_addr, 0);
	images->fit_uname_fdt = fit_uname_fdt;
	images->fit_noffset_fdt = fdt_noffset;
	fdt_addr = load;
	break;
	} else
	#endif
	{
	/*
	* FDT blob
	*/
	debug("* fdt: raw FDT blob\n");
	printf("## Flattened Device Tree blob at %08lx\n",
	(long)fdt_addr);
	}
	break;
	default:
	puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
	goto error;
	}

	printf(" Booting using the fdt blob at %#08lx\n", fdt_addr);
	fdt_blob = map_sysmem(fdt_addr, 0);
	} else if (images->legacy_hdr_valid &&
	image_check_type(&images->legacy_hdr_os_copy,
	IH_TYPE_MULTI)) {
	ulong fdt_data, fdt_len;

	/*
	* Now check if we have a legacy multi-component image,
	* get second entry data start address and len.
	*/
	printf("## Flattened Device Tree from multi component Image at %08lX\n",
	(ulong)images->legacy_hdr_os);

	image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data,
	&fdt_len);
	if (fdt_len) {
	fdt_blob = (char *)fdt_data;
	printf(" Booting using the fdt at 0x%p\n", fdt_blob);

	if (fdt_check_header(fdt_blob) != 0) {
	fdt_error("image is not a fdt");
	goto error;
	}

	if (fdt_totalsize(fdt_blob) != fdt_len) {
	fdt_error("fdt size != image size");
	goto error;
	}
	} else {
	debug("## No Flattened Device Tree\n");
	return 0;
	}
	} else {
	debug("## No Flattened Device Tree\n");
	return 0;
	}

	*of_flat_tree = fdt_blob;
	*of_size = fdt_totalsize(fdt_blob);
	debug(" of_flat_tree at 0x%08lx size 0x%08lx\n",
	(ulong)of_flat_tree, of_size);

	return 0;

	error:
	*of_flat_tree = NULL;
	*of_size = 0;
	return 1;
	}

	/*
	* Verify the device tree.
	*
	* This function is called after all device tree fix-ups have been enacted,
	* so that the final device tree can be verified. The definition of "verified"
	* is up to the specific implementation. However, it generally means that the
	* addresses of some of the devices in the device tree are compared with the
	* actual addresses at which U-Boot has placed them.
	*
	* Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the
	* boot process.
	*/
	__weak int ft_verify_fdt(void *fdt)
	{
	return 1;
	}

	__weak int arch_fixup_fdt(void *blob)
	{
	return 0;
	}

	int image_setup_libfdt(bootm_headers_t images, void blob,
	int of_size, struct lmb *lmb)
	{
	ulong *initrd_start = &images->initrd_start;
	ulong *initrd_end = &images->initrd_end;
	int ret;

	if (fdt_chosen(blob) < 0) {
	puts("ERROR: /chosen node create failed");
	puts(" - must RESET the board to recover.\n");
	return -1;
	}
	if (arch_fixup_fdt(blob) < 0) {
	puts("ERROR: arch specific fdt fixup failed");
	return -1;
	}
	if (IMAGE_OF_BOARD_SETUP)
	ft_board_setup(blob, gd->bd);
	fdt_fixup_ethernet(blob);

	/* Delete the old LMB reservation */
	lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob,
	(phys_size_t)fdt_totalsize(blob));

	ret = fdt_shrink_to_minimum(blob);
	if (ret < 0)
	return ret;
	of_size = ret;

	if (initrd_start && initrd_end) {
	of_size += FDT_RAMDISK_OVERHEAD;
	fdt_set_totalsize(blob, of_size);
	}
	/* Create a new LMB reservation */
	lmb_reserve(lmb, (ulong)blob, of_size);

	fdt_initrd(blob, initrd_start, initrd_end);
	if (!ft_verify_fdt(blob))
	return -1;

	#if defined(CONFIG_SOC_KEYSTONE)
	if (IMAGE_OF_BOARD_SETUP)
	ft_board_setup_ex(blob, gd->bd);
	#endif

	return 0;
	}