| /* |
| * (C) Copyright 2002 |
| * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
| * |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* High Level Configuration Options */ |
| #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ |
| #define CONFIG_XSENGINE 1 |
| #define CONFIG_MMC 1 |
| #define CONFIG_DOS_PARTITION 1 |
| #define BOARD_LATE_INIT 1 |
| #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| /* we will never enable dcache, because we have to setup MMU first */ |
| #define CONFIG_SYS_NO_DCACHE |
| |
| #define CONFIG_SYS_HZ 1000 |
| #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ |
| |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ |
| #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ |
| #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ |
| #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ |
| #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ |
| #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ |
| #define CONFIG_SYS_DRAM_BASE 0xa0000000 |
| #define CONFIG_SYS_DRAM_SIZE 0x04000000 |
| |
| /* FLASH organization */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
| #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_2 0x00000000 /* Flash Bank #2 */ |
| #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 127 KB sectors */ |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| |
| /* |
| * JFFS2 partitions |
| */ |
| /* No command line, one static partition, whole device */ |
| #undef CONFIG_CMD_MTDPARTS |
| #define CONFIG_JFFS2_DEV "nor0" |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #define CONFIG_JFFS2_PART_OFFSET 0x00000000 |
| |
| /* mtdparts command line support */ |
| /* Note: fake mtd_id used, no linux mtd map file */ |
| /* |
| #define CONFIG_CMD_MTDPARTS |
| #define MTDIDS_DEFAULT "nor0=xsengine-0" |
| #define MTDPARTS_DEFAULT "mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)" |
| */ |
| |
| /* Environment settings */ |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector (after monitor)*/ |
| #define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Size of the Environment Sector */ |
| #define CONFIG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ |
| |
| /* timeout values are in ticks */ |
| #define CONFIG_SYS_FLASH_ERASE_TOUT (75*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT (50*CONFIG_SYS_HZ) /* Timeout for Flash Write */ |
| |
| /* Size of malloc() pool */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| |
| /* Hardware drivers */ |
| #define CONFIG_DRIVER_SMC91111 |
| #define CONFIG_SMC91111_BASE 0x04000300 |
| #define CONFIG_SMC_USE_32_BIT 1 |
| |
| /* select serial console configuration */ |
| #define CONFIG_PXA_SERIAL |
| #define CONFIG_FFUART 1 |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_BAUDRATE 115200 |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_JFFS2 |
| |
| |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF |
| #define CONFIG_NETMASK 255.255.255.0 |
| #define CONFIG_IPADDR 192.168.1.50 |
| #define CONFIG_SERVERIP 192.168.1.2 |
| #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS1,115200" |
| #define CONFIG_CMDLINE_TAG |
| |
| /* Miscellaneous configurable options */ |
| #define CONFIG_SYS_HUSH_PARSER 1 |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ |
| #define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */ |
| |
| #ifdef CONFIG_MMC |
| #define CONFIG_PXA_MMC |
| #define CONFIG_CMD_MMC |
| #define CONFIG_SYS_MMC_BASE 0xF0000000 |
| #endif |
| |
| /* Stack sizes - The stack sizes are set up in start.S using the settings below */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /* GP set register */ |
| #define CONFIG_SYS_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ |
| #define CONFIG_SYS_GPSR1_VAL 0x00020000 /* nPWE */ |
| #define CONFIG_SYS_GPSR2_VAL 0x0000C000 /* CS2, CS3 */ |
| |
| /* GP clear register */ |
| #define CONFIG_SYS_GPCR0_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR1_VAL 0x00000000 |
| #define CONFIG_SYS_GPCR2_VAL 0x00000000 |
| |
| /* GP direction register */ |
| #define CONFIG_SYS_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ |
| #define CONFIG_SYS_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ |
| #define CONFIG_SYS_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ |
| |
| /* GP rising edge detect register */ |
| #define CONFIG_SYS_GRER0_VAL 0x00000000 |
| #define CONFIG_SYS_GRER1_VAL 0x00000000 |
| #define CONFIG_SYS_GRER2_VAL 0x00000000 |
| |
| /* GP falling edge detect register */ |
| #define CONFIG_SYS_GFER0_VAL 0x00000000 |
| #define CONFIG_SYS_GFER1_VAL 0x00000000 |
| #define CONFIG_SYS_GFER2_VAL 0x00000000 |
| |
| /* GP alternate function register */ |
| #define CONFIG_SYS_GAFR0_L_VAL 0x80000000 /* CS1 */ |
| #define CONFIG_SYS_GAFR0_U_VAL 0x00000010 /* RDY */ |
| #define CONFIG_SYS_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ |
| #define CONFIG_SYS_GAFR1_U_VAL 0x00000008 /* nPWE */ |
| #define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ |
| #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 |
| |
| #define CONFIG_SYS_PSSR_VAL 0x00000020 /* Power manager sleep status */ |
| #define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */ |
| #define CONFIG_SYS_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */ |
| #define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ |
| |
| /* Memory settings */ |
| #define CONFIG_SYS_MSC0_VAL 0x25F425F0 |
| |
| /* MDCNFG: SDRAM Configuration Register */ |
| #define CONFIG_SYS_MDCNFG_VAL 0x000009C9 |
| |
| /* MDREFR: SDRAM Refresh Control Register */ |
| #define CONFIG_SYS_MDREFR_VAL 0x00018018 |
| |
| /* MDMRS: Mode Register Set Configuration Register */ |
| #define CONFIG_SYS_MDMRS_VAL 0x00220022 |
| |
| #endif /* __CONFIG_H */ |