| /* |
| * (C) Copyright 2000 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * (C) Copyright 2001 |
| * Advent Networks, Inc. <http://www.adventnetworks.com> |
| * Jay Monkman <jtm@smoothsmoothie.com> |
| * |
| * (C) Copyright 2001 |
| * Advent Networks, Inc. <http://www.adventnetworks.com> |
| * Oliver Brown <oliverb@alumni.utexas.net> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /*********************************************************************/ |
| /* DESCRIPTION: |
| * This file contains the board routines for the GW8260 board. |
| * |
| * MODULE DEPENDENCY: |
| * None |
| * |
| * RESTRICTIONS/LIMITATIONS: |
| * None |
| * |
| * Copyright (c) 2001, Advent Networks, Inc. |
| */ |
| /*********************************************************************/ |
| |
| #include <common.h> |
| #include <ioports.h> |
| #include <mpc8260.h> |
| |
| /* |
| * I/O Port configuration table |
| * |
| */ |
| const iop_conf_t iop_conf_tab[4][32] = { |
| |
| /* Port A configuration */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* TP14 */ |
| /* PA30 */ { 1, 1, 1, 1, 0, 0 }, /* US_RTS */ |
| /* PA29 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_DATA */ |
| /* PA28 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_CLK */ |
| /* PA27 */ { 1, 0, 0, 1, 0, 0 }, /* TP12 */ |
| /* PA26 */ { 1, 0, 0, 0, 0, 0 }, /* IO_STATUS */ |
| /* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CLOCK */ |
| /* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CONFIG */ |
| /* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DONE */ |
| /* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DATA */ |
| /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD3 */ |
| /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD2 */ |
| /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD1 */ |
| /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD0 */ |
| /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD0 */ |
| /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD1 */ |
| /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD2 */ |
| /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD3 */ |
| /* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE7 */ |
| /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE6 */ |
| /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE5 */ |
| /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE4 */ |
| /* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE3 */ |
| /* PA8 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE2 */ |
| /* PA7 */ { 1, 0, 0, 0, 0, 0 }, /* LSSI_IN */ |
| /* PA6 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE0 */ |
| /* PA5 */ { 1, 0, 0, 1, 0, 0 }, /* DEMOD_RESET_ */ |
| /* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* MOD_RESET_ */ |
| /* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* IO_RESET */ |
| /* PA2 */ { 1, 0, 0, 1, 0, 0 }, /* TX_ENABLE */ |
| /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* RX_LOCK */ |
| /* PA0 */ { 1, 0, 0, 1, 0, 1 } /* MPC_RESET_ */ |
| }, |
| |
| /* Port B configuration */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TX_ER */ |
| /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_DV */ |
| /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FETH0_TX_EN */ |
| /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_ER */ |
| /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_COL */ |
| /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_CRS */ |
| /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD3 */ |
| /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD2 */ |
| /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD1 */ |
| /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD0 */ |
| /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD0 */ |
| /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD1 */ |
| /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD2 */ |
| /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD3 */ |
| /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_DV */ |
| /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_ER */ |
| /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_ER */ |
| /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_EN */ |
| /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_COL */ |
| /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_CRS */ |
| /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD3 */ |
| /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD2 */ |
| /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD1 */ |
| /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD0 */ |
| /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD0 */ |
| /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD1 */ |
| /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD2 */ |
| /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD3 */ |
| /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ |
| }, |
| |
| /* Port C */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PC31 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_RESET_ */ |
| /* PC30 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_PAUSE_ */ |
| /* PC29 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW1 */ |
| /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW0 */ |
| /* PC27 */ { 1, 0, 0, 1, 0, 0 }, /* TP13 */ |
| /* PC26 */ { 1, 0, 0, 0, 0, 0 }, /* RXDECDFLG */ |
| /* PC25 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFAIL */ |
| /* PC24 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFLG */ |
| /* PC23 */ { 1, 0, 0, 1, 0, 0 }, /* WD_TCL */ |
| /* PC22 */ { 1, 0, 0, 1, 0, 0 }, /* WD_EN */ |
| /* PC21 */ { 1, 0, 0, 1, 0, 0 }, /* US_TXCLK */ |
| /* PC20 */ { 1, 0, 0, 0, 0, 0 }, /* DS_RXCLK */ |
| /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_CLK */ |
| /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_TX_CLK */ |
| /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_CLK */ |
| /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_TX_CLK */ |
| /* PC15 */ { 1, 0, 0, 1, 0, 0 }, /* TX_SHUTDOWN_ */ |
| /* PC14 */ { 1, 0, 0, 0, 0, 0 }, /* RS_232_DTR_ */ |
| /* PC13 */ { 1, 0, 0, 0, 0, 0 }, /* TXERR */ |
| /* PC12 */ { 1, 0, 0, 1, 0, 1 }, /* FETH1_MDDIS */ |
| /* PC11 */ { 1, 0, 0, 1, 0, 1 }, /* FETH0_MDDIS */ |
| /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */ |
| /* PC9 */ { 1, 0, 0, 1, 1, 1 }, /* MDIO */ |
| /* PC8 */ { 1, 0, 0, 1, 1, 1 }, /* SER_NUM */ |
| /* PC7 */ { 1, 1, 0, 0, 0, 0 }, /* US_CTS */ |
| /* PC6 */ { 1, 1, 0, 0, 0, 0 }, /* DS_CD_ */ |
| /* PC5 */ { 1, 0, 0, 1, 0, 0 }, /* FETH1_PWRDWN */ |
| /* PC4 */ { 1, 0, 0, 1, 0, 0 }, /* FETH0_PWRDWN */ |
| /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED3 */ |
| /* PC2 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED2 */ |
| /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED1 */ |
| /* PC0 */ { 1, 0, 0, 1, 0, 1 }, /* MPULED0 */ |
| }, |
| |
| /* Port D */ |
| { /* conf ppar psor pdir podr pdat */ |
| /* PD31 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD30 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD29 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD28 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD27 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD26 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD25 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD24 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD23 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD22 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD21 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD20 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* not used */ |
| /* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* not used */ |
| /* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* not used */ |
| /* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* not used */ |
| /* PD15 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SDA */ |
| /* PD14 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SCL */ |
| /* PD13 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED7 */ |
| /* PD12 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED6 */ |
| /* PD11 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED5 */ |
| /* PD10 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED4 */ |
| /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* RS232_TXD */ |
| /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* RD232_RXD */ |
| /* PD7 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD6 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD5 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD4 */ { 1, 0, 0, 0, 0, 0 }, /* not used */ |
| /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ |
| /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ |
| } |
| }; |
| |
| /*********************************************************************/ |
| /* NAME: checkboard() - Displays the board type and serial number */ |
| /* */ |
| /* OUTPUTS: */ |
| /* Displays the board type and serial number */ |
| /* */ |
| /* RETURNS: */ |
| /* Always returns 1 */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* */ |
| /* */ |
| /*********************************************************************/ |
| int checkboard (void) |
| { |
| char buf[64]; |
| int i = getenv_f("serial#", buf, sizeof(buf)); |
| |
| puts ("Board: Advent Networks gw8260\n"); |
| |
| if (i > 0) { |
| printf("SN: %s\n", buf); |
| } |
| return 0; |
| } |
| |
| |
| #if defined (CONFIG_SYS_DRAM_TEST) |
| /*********************************************************************/ |
| /* NAME: move64() - moves a double word (64-bit) */ |
| /* */ |
| /* DESCRIPTION: */ |
| /* this function performs a double word move from the data at */ |
| /* the source pointer to the location at the destination pointer. */ |
| /* */ |
| /* INPUTS: */ |
| /* unsigned long long *src - pointer to data to move */ |
| /* */ |
| /* OUTPUTS: */ |
| /* unsigned long long *dest - pointer to locate to move data */ |
| /* */ |
| /* RETURNS: */ |
| /* None */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* May cloober fr0. */ |
| /* */ |
| /*********************************************************************/ |
| static void move64 (unsigned long long *src, unsigned long long *dest) |
| { |
| asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ |
| "stfd 0, 0(4)" /* *dest = fpr0 */ |
| : : : "fr0"); /* Clobbers fr0 */ |
| return; |
| } |
| |
| |
| #if defined (CONFIG_SYS_DRAM_TEST_DATA) |
| |
| unsigned long long pattern[] = { |
| 0xaaaaaaaaaaaaaaaaULL, |
| 0xccccccccccccccccULL, |
| 0xf0f0f0f0f0f0f0f0ULL, |
| 0xff00ff00ff00ff00ULL, |
| 0xffff0000ffff0000ULL, |
| 0xffffffff00000000ULL, |
| 0x00000000ffffffffULL, |
| 0x0000ffff0000ffffULL, |
| 0x00ff00ff00ff00ffULL, |
| 0x0f0f0f0f0f0f0f0fULL, |
| 0x3333333333333333ULL, |
| 0x5555555555555555ULL, |
| }; |
| |
| /*********************************************************************/ |
| /* NAME: mem_test_data() - test data lines for shorts and opens */ |
| /* */ |
| /* DESCRIPTION: */ |
| /* Tests data lines for shorts and opens by forcing adjacent data */ |
| /* to opposite states. Because the data lines could be routed in */ |
| /* an arbitrary manner the must ensure test patterns ensure that */ |
| /* every case is tested. By using the following series of binary */ |
| /* patterns every combination of adjacent bits is test regardless */ |
| /* of routing. */ |
| /* */ |
| /* ...101010101010101010101010 */ |
| /* ...110011001100110011001100 */ |
| /* ...111100001111000011110000 */ |
| /* ...111111110000000011111111 */ |
| /* */ |
| /* Carrying this out, gives us six hex patterns as follows: */ |
| /* */ |
| /* 0xaaaaaaaaaaaaaaaa */ |
| /* 0xcccccccccccccccc */ |
| /* 0xf0f0f0f0f0f0f0f0 */ |
| /* 0xff00ff00ff00ff00 */ |
| /* 0xffff0000ffff0000 */ |
| /* 0xffffffff00000000 */ |
| /* */ |
| /* The number test patterns will always be given by: */ |
| /* */ |
| /* log(base 2)(number data bits) = log2 (64) = 6 */ |
| /* */ |
| /* To test for short and opens to other signals on our boards. we */ |
| /* simply */ |
| /* test with the 1's complemnt of the paterns as well. */ |
| /* */ |
| /* OUTPUTS: */ |
| /* Displays failing test pattern */ |
| /* */ |
| /* RETURNS: */ |
| /* 0 - Passed test */ |
| /* 1 - Failed test */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* Assumes only one one SDRAM bank */ |
| /* */ |
| /*********************************************************************/ |
| int mem_test_data (void) |
| { |
| unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_SDRAM_BASE; |
| unsigned long long temp64 = 0; |
| int num_patterns = sizeof (pattern) / sizeof (pattern[0]); |
| int i; |
| unsigned int hi, lo; |
| |
| for (i = 0; i < num_patterns; i++) { |
| move64 (&(pattern[i]), pmem); |
| move64 (pmem, &temp64); |
| |
| /* hi = (temp64>>32) & 0xffffffff; */ |
| /* lo = temp64 & 0xffffffff; */ |
| /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ |
| |
| hi = (pattern[i] >> 32) & 0xffffffff; |
| lo = pattern[i] & 0xffffffff; |
| /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */ |
| |
| if (temp64 != pattern[i]) { |
| printf ("\n Data Test Failed, pattern 0x%08x%08x", |
| hi, lo); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_SYS_DRAM_TEST_DATA */ |
| |
| #if defined (CONFIG_SYS_DRAM_TEST_ADDRESS) |
| /*********************************************************************/ |
| /* NAME: mem_test_address() - test address lines */ |
| /* */ |
| /* DESCRIPTION: */ |
| /* This function performs a test to verify that each word im */ |
| /* memory is uniquly addressable. The test sequence is as follows: */ |
| /* */ |
| /* 1) write the address of each word to each word. */ |
| /* 2) verify that each location equals its address */ |
| /* */ |
| /* OUTPUTS: */ |
| /* Displays failing test pattern and address */ |
| /* */ |
| /* RETURNS: */ |
| /* 0 - Passed test */ |
| /* 1 - Failed test */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* */ |
| /* */ |
| /*********************************************************************/ |
| int mem_test_address (void) |
| { |
| volatile unsigned int *pmem = |
| (volatile unsigned int *) CONFIG_SYS_SDRAM_BASE; |
| const unsigned int size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 4; |
| unsigned int i; |
| |
| /* write address to each location */ |
| for (i = 0; i < size; i++) { |
| pmem[i] = i; |
| } |
| |
| /* verify each loaction */ |
| for (i = 0; i < size; i++) { |
| if (pmem[i] != i) { |
| printf ("\n Address Test Failed at 0x%x", i); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| #endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */ |
| |
| #if defined (CONFIG_SYS_DRAM_TEST_WALK) |
| /*********************************************************************/ |
| /* NAME: mem_march() - memory march */ |
| /* */ |
| /* DESCRIPTION: */ |
| /* Marches up through memory. At each location verifies rmask if */ |
| /* read = 1. At each location write wmask if write = 1. Displays */ |
| /* failing address and pattern. */ |
| /* */ |
| /* INPUTS: */ |
| /* volatile unsigned long long * base - start address of test */ |
| /* unsigned int size - number of dwords(64-bit) to test */ |
| /* unsigned long long rmask - read verify mask */ |
| /* unsigned long long wmask - wrtie verify mask */ |
| /* short read - verifies rmask if read = 1 */ |
| /* short write - writes wmask if write = 1 */ |
| /* */ |
| /* OUTPUTS: */ |
| /* Displays failing test pattern and address */ |
| /* */ |
| /* RETURNS: */ |
| /* 0 - Passed test */ |
| /* 1 - Failed test */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* */ |
| /* */ |
| /*********************************************************************/ |
| int mem_march (volatile unsigned long long *base, |
| unsigned int size, |
| unsigned long long rmask, |
| unsigned long long wmask, short read, short write) |
| { |
| unsigned int i; |
| unsigned long long temp = 0; |
| unsigned int hitemp, lotemp, himask, lomask; |
| |
| for (i = 0; i < size; i++) { |
| if (read != 0) { |
| /* temp = base[i]; */ |
| move64 ((unsigned long long *) &(base[i]), &temp); |
| if (rmask != temp) { |
| hitemp = (temp >> 32) & 0xffffffff; |
| lotemp = temp & 0xffffffff; |
| himask = (rmask >> 32) & 0xffffffff; |
| lomask = rmask & 0xffffffff; |
| |
| printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp); |
| return 1; |
| } |
| } |
| if (write != 0) { |
| /* base[i] = wmask; */ |
| move64 (&wmask, (unsigned long long *) &(base[i])); |
| } |
| } |
| return 0; |
| } |
| #endif /* CONFIG_SYS_DRAM_TEST_WALK */ |
| |
| /*********************************************************************/ |
| /* NAME: mem_test_walk() - a simple walking ones test */ |
| /* */ |
| /* DESCRIPTION: */ |
| /* Performs a walking ones through entire physical memory. The */ |
| /* test uses as series of memory marches, mem_march(), to verify */ |
| /* and write the test patterns to memory. The test sequence is as */ |
| /* follows: */ |
| /* 1) march writing 0000...0001 */ |
| /* 2) march verifying 0000...0001 , writing 0000...0010 */ |
| /* 3) repeat step 2 shifting masks left 1 bit each time unitl */ |
| /* the write mask equals 1000...0000 */ |
| /* 4) march verifying 1000...0000 */ |
| /* The test fails if any of the memory marches return a failure. */ |
| /* */ |
| /* OUTPUTS: */ |
| /* Displays which pass on the memory test is executing */ |
| /* */ |
| /* RETURNS: */ |
| /* 0 - Passed test */ |
| /* 1 - Failed test */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* */ |
| /* */ |
| /*********************************************************************/ |
| int mem_test_walk (void) |
| { |
| unsigned long long mask; |
| volatile unsigned long long *pmem = |
| (volatile unsigned long long *) CONFIG_SYS_SDRAM_BASE; |
| const unsigned long size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 8; |
| |
| unsigned int i; |
| |
| mask = 0x01; |
| |
| printf ("Initial Pass"); |
| mem_march (pmem, size, 0x0, 0x1, 0, 1); |
| |
| printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); |
| printf (" "); |
| printf ("\b\b\b\b\b\b\b\b\b\b\b\b"); |
| |
| for (i = 0; i < 63; i++) { |
| printf ("Pass %2d", i + 2); |
| if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) { |
| /*printf("mask: 0x%x, pass: %d, ", mask, i); */ |
| return 1; |
| } |
| mask = mask << 1; |
| printf ("\b\b\b\b\b\b\b"); |
| } |
| |
| printf ("Last Pass"); |
| if (mem_march (pmem, size, 0, mask, 0, 1) != 0) { |
| /* printf("mask: 0x%x", mask); */ |
| return 1; |
| } |
| printf ("\b\b\b\b\b\b\b\b\b"); |
| printf (" "); |
| printf ("\b\b\b\b\b\b\b\b\b"); |
| |
| return 0; |
| } |
| |
| /*********************************************************************/ |
| /* NAME: testdram() - calls any enabled memory tests */ |
| /* */ |
| /* DESCRIPTION: */ |
| /* Runs memory tests if the environment test variables are set to */ |
| /* 'y'. */ |
| /* */ |
| /* INPUTS: */ |
| /* testdramdata - If set to 'y', data test is run. */ |
| /* testdramaddress - If set to 'y', address test is run. */ |
| /* testdramwalk - If set to 'y', walking ones test is run */ |
| /* */ |
| /* OUTPUTS: */ |
| /* None */ |
| /* */ |
| /* RETURNS: */ |
| /* 0 - Passed test */ |
| /* 1 - Failed test */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* */ |
| /* */ |
| /*********************************************************************/ |
| int testdram (void) |
| { |
| int rundata, runaddress, runwalk; |
| |
| rundata = getenv_yesno("testdramdata") == 1; |
| runaddress = getenv_yesno("testdramaddress") == 1; |
| runwalk = getenv_yesno("testdramwalk") == 1; |
| |
| if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { |
| printf ("Testing RAM ... "); |
| } |
| #ifdef CONFIG_SYS_DRAM_TEST_DATA |
| if (rundata == 1) { |
| if (mem_test_data () == 1) { |
| return 1; |
| } |
| } |
| #endif |
| #ifdef CONFIG_SYS_DRAM_TEST_ADDRESS |
| if (runaddress == 1) { |
| if (mem_test_address () == 1) { |
| return 1; |
| } |
| } |
| #endif |
| #ifdef CONFIG_SYS_DRAM_TEST_WALK |
| if (runwalk == 1) { |
| if (mem_test_walk () == 1) { |
| return 1; |
| } |
| } |
| #endif |
| if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { |
| printf ("passed"); |
| } |
| return 0; |
| |
| } |
| #endif /* CONFIG_SYS_DRAM_TEST */ |
| |
| /*********************************************************************/ |
| /* NAME: initdram() - initializes SDRAM controller */ |
| /* */ |
| /* DESCRIPTION: */ |
| /* Initializes the MPC8260's SDRAM controller. */ |
| /* */ |
| /* INPUTS: */ |
| /* CONFIG_SYS_IMMR - MPC8260 Internal memory map */ |
| /* CONFIG_SYS_SDRAM_BASE - Physical start address of SDRAM */ |
| /* CONFIG_SYS_PSDMR - SDRAM mode register */ |
| /* CONFIG_SYS_MPTPR - Memory refresh timer prescaler register */ |
| /* CONFIG_SYS_SDRAM0_SIZE - SDRAM size */ |
| /* */ |
| /* RETURNS: */ |
| /* SDRAM size in bytes */ |
| /* */ |
| /* RESTRICTIONS/LIMITATIONS: */ |
| /* */ |
| /* */ |
| /*********************************************************************/ |
| phys_size_t initdram (int board_type) |
| { |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| volatile memctl8260_t *memctl = &immap->im_memctl; |
| volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8); |
| ulong psdmr = CONFIG_SYS_PSDMR; |
| int i; |
| |
| /* |
| * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): |
| * |
| * "At system reset, initialization software must set up the |
| * programmable parameters in the memory controller banks registers |
| * (ORx, BRx, P/LSDMR). After all memory parameters are configured, |
| * system software should execute the following initialization sequence |
| * for each SDRAM device. |
| * |
| * 1. Issue a PRECHARGE-ALL-BANKS command |
| * 2. Issue eight CBR REFRESH commands |
| * 3. Issue a MODE-SET command to initialize the mode register |
| * |
| * The initial commands are executed by setting P/LSDMR[OP] and |
| * accessing the SDRAM with a single-byte transaction." |
| * |
| * The appropriate BRx/ORx registers have already been set when we |
| * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. |
| */ |
| |
| memctl->memc_psrt = CONFIG_SYS_PSRT; |
| memctl->memc_mptpr = CONFIG_SYS_MPTPR; |
| |
| memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; |
| *ramaddr = c; |
| |
| memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; |
| for (i = 0; i < 8; i++) { |
| *ramaddr = c; |
| } |
| memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; |
| *ramaddr = c; |
| |
| memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN; |
| *ramaddr = c; |
| |
| /* return total ram size */ |
| return (CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024); |
| } |
| |
| /*********************************************************************/ |
| /* End of gw8260.c */ |
| /*********************************************************************/ |