| /* |
| * (C) Copyright 2006-2008 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Author |
| * Mansoor Ahamed <mansoor.ahamed@ti.com> |
| * |
| * Initial Code from: |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _MEM_H_ |
| #define _MEM_H_ |
| |
| /* |
| * GPMC settings - |
| * Definitions is as per the following format |
| * #define <PART>_GPMC_CONFIG<x> <value> |
| * Where: |
| * PART is the part name e.g. STNOR - Intel Strata Flash |
| * x is GPMC config registers from 1 to 6 (there will be 6 macros) |
| * Value is corresponding value |
| * |
| * For every valid PRCM configuration there should be only one definition of |
| * the same. if values are independent of the board, this definition will be |
| * present in this file if values are dependent on the board, then this should |
| * go into corresponding mem-boardName.h file |
| * |
| * Currently valid part Names are (PART): |
| * M_NAND - Micron NAND |
| * STNOR - STMicrolelctronics M29W128GL |
| */ |
| #define GPMC_SIZE_256M 0x0 |
| #define GPMC_SIZE_128M 0x8 |
| #define GPMC_SIZE_64M 0xC |
| #define GPMC_SIZE_32M 0xE |
| #define GPMC_SIZE_16M 0xF |
| |
| #define M_NAND_GPMC_CONFIG1 0x00000800 |
| #define M_NAND_GPMC_CONFIG2 0x001e1e00 |
| #define M_NAND_GPMC_CONFIG3 0x001e1e00 |
| #define M_NAND_GPMC_CONFIG4 0x16051807 |
| #define M_NAND_GPMC_CONFIG5 0x00151e1e |
| #define M_NAND_GPMC_CONFIG6 0x16000f80 |
| #define M_NAND_GPMC_CONFIG7 0x00000008 |
| |
| #define STNOR_GPMC_CONFIG1 0x00001200 |
| #define STNOR_GPMC_CONFIG2 0x00101000 |
| #define STNOR_GPMC_CONFIG3 0x00030301 |
| #define STNOR_GPMC_CONFIG4 0x10041004 |
| #define STNOR_GPMC_CONFIG5 0x000C1010 |
| #define STNOR_GPMC_CONFIG6 0x08070280 |
| #define STNOR_GPMC_CONFIG7 0x00000F48 |
| |
| /* max number of GPMC Chip Selects */ |
| #define GPMC_MAX_CS 8 |
| /* max number of GPMC regs */ |
| #define GPMC_MAX_REG 7 |
| |
| #define DBG_MPDB 6 |
| |
| #endif /* endif _MEM_H_ */ |