| /* |
| * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Author: Felipe Balbi <balbi@ti.com> |
| * |
| * Based on board/ti/dra7xx/evm.c |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <palmas.h> |
| #include <sata.h> |
| #include <usb.h> |
| #include <asm/omap_common.h> |
| #include <asm/emif.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/dra7xx_iodelay.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/mmc_host_def.h> |
| #include <asm/arch/sata.h> |
| #include <asm/arch/gpio.h> |
| #include <environment.h> |
| |
| #include "mux_data.h" |
| |
| #ifdef CONFIG_DRIVER_TI_CPSW |
| #include <cpsw.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* GPIO 7_11 */ |
| #define GPIO_DDR_VTT_EN 203 |
| |
| const struct omap_sysinfo sysinfo = { |
| "Board: BeagleBoard x15\n" |
| }; |
| |
| static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = { |
| .dmm_lisa_map_3 = 0x80740300, |
| .is_ma_present = 0x1 |
| }; |
| |
| void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) |
| { |
| *dmm_lisa_regs = &beagle_x15_lisa_regs; |
| } |
| |
| static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = { |
| .sdram_config_init = 0x61851b32, |
| .sdram_config = 0x61851b32, |
| .sdram_config2 = 0x00000000, |
| .ref_ctrl = 0x000040F1, |
| .ref_ctrl_final = 0x00001035, |
| .sdram_tim1 = 0xceef266b, |
| .sdram_tim2 = 0x328f7fda, |
| .sdram_tim3 = 0x027f88a8, |
| .read_idle_ctrl = 0x00050000, |
| .zq_config = 0x0007190b, |
| .temp_alert_config = 0x00000000, |
| .emif_ddr_phy_ctlr_1_init = 0x0024400b, |
| .emif_ddr_phy_ctlr_1 = 0x0e24400b, |
| .emif_ddr_ext_phy_ctrl_1 = 0x10040100, |
| .emif_ddr_ext_phy_ctrl_2 = 0x00740074, |
| .emif_ddr_ext_phy_ctrl_3 = 0x00780078, |
| .emif_ddr_ext_phy_ctrl_4 = 0x007c007c, |
| .emif_ddr_ext_phy_ctrl_5 = 0x007b007b, |
| .emif_rd_wr_lvl_rmp_win = 0x00000000, |
| .emif_rd_wr_lvl_rmp_ctl = 0x80000000, |
| .emif_rd_wr_lvl_ctl = 0x00000000, |
| .emif_rd_wr_exec_thresh = 0x00000305 |
| }; |
| |
| /* Ext phy ctrl regs 1-35 */ |
| static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = { |
| 0x10040100, |
| 0x00740074, |
| 0x00780078, |
| 0x007c007c, |
| 0x007b007b, |
| 0x00800080, |
| 0x00360036, |
| 0x00340034, |
| 0x00360036, |
| 0x00350035, |
| 0x00350035, |
| |
| 0x01ff01ff, |
| 0x01ff01ff, |
| 0x01ff01ff, |
| 0x01ff01ff, |
| 0x01ff01ff, |
| |
| 0x00430043, |
| 0x003e003e, |
| 0x004a004a, |
| 0x00470047, |
| 0x00400040, |
| |
| 0x00000000, |
| 0x00600020, |
| 0x40011080, |
| 0x08102040, |
| |
| 0x00400040, |
| 0x00400040, |
| 0x00400040, |
| 0x00400040, |
| 0x00400040, |
| 0x0, |
| 0x0, |
| 0x0, |
| 0x0, |
| 0x0 |
| }; |
| |
| static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { |
| .sdram_config_init = 0x61851b32, |
| .sdram_config = 0x61851b32, |
| .sdram_config2 = 0x00000000, |
| .ref_ctrl = 0x000040F1, |
| .ref_ctrl_final = 0x00001035, |
| .sdram_tim1 = 0xceef266b, |
| .sdram_tim2 = 0x328f7fda, |
| .sdram_tim3 = 0x027f88a8, |
| .read_idle_ctrl = 0x00050000, |
| .zq_config = 0x0007190b, |
| .temp_alert_config = 0x00000000, |
| .emif_ddr_phy_ctlr_1_init = 0x0024400b, |
| .emif_ddr_phy_ctlr_1 = 0x0e24400b, |
| .emif_ddr_ext_phy_ctrl_1 = 0x10040100, |
| .emif_ddr_ext_phy_ctrl_2 = 0x00820082, |
| .emif_ddr_ext_phy_ctrl_3 = 0x008b008b, |
| .emif_ddr_ext_phy_ctrl_4 = 0x00800080, |
| .emif_ddr_ext_phy_ctrl_5 = 0x007e007e, |
| .emif_rd_wr_lvl_rmp_win = 0x00000000, |
| .emif_rd_wr_lvl_rmp_ctl = 0x80000000, |
| .emif_rd_wr_lvl_ctl = 0x00000000, |
| .emif_rd_wr_exec_thresh = 0x00000305 |
| }; |
| |
| static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = { |
| 0x10040100, |
| 0x00820082, |
| 0x008b008b, |
| 0x00800080, |
| 0x007e007e, |
| 0x00800080, |
| 0x00370037, |
| 0x00390039, |
| 0x00360036, |
| 0x00370037, |
| 0x00350035, |
| 0x01ff01ff, |
| 0x01ff01ff, |
| 0x01ff01ff, |
| 0x01ff01ff, |
| 0x01ff01ff, |
| 0x00540054, |
| 0x00540054, |
| 0x004e004e, |
| 0x004c004c, |
| 0x00400040, |
| |
| 0x00000000, |
| 0x00600020, |
| 0x40011080, |
| 0x08102040, |
| |
| 0x00400040, |
| 0x00400040, |
| 0x00400040, |
| 0x00400040, |
| 0x00400040, |
| 0x0, |
| 0x0, |
| 0x0, |
| 0x0, |
| 0x0 |
| }; |
| |
| void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) |
| { |
| switch (emif_nr) { |
| case 1: |
| *regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs; |
| break; |
| case 2: |
| *regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs; |
| break; |
| } |
| } |
| |
| void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size) |
| { |
| switch (emif_nr) { |
| case 1: |
| *regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs; |
| *size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs); |
| break; |
| case 2: |
| *regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs; |
| *size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs); |
| break; |
| } |
| } |
| |
| struct vcores_data beagle_x15_volts = { |
| .mpu.value = VDD_MPU_DRA752, |
| .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM, |
| .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, |
| .mpu.addr = TPS659038_REG_ADDR_SMPS12, |
| .mpu.pmic = &tps659038, |
| |
| .eve.value = VDD_EVE_DRA752, |
| .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM, |
| .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, |
| .eve.addr = TPS659038_REG_ADDR_SMPS45, |
| .eve.pmic = &tps659038, |
| |
| .gpu.value = VDD_GPU_DRA752, |
| .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, |
| .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, |
| .gpu.addr = TPS659038_REG_ADDR_SMPS45, |
| .gpu.pmic = &tps659038, |
| |
| .core.value = VDD_CORE_DRA752, |
| .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, |
| .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, |
| .core.addr = TPS659038_REG_ADDR_SMPS6, |
| .core.pmic = &tps659038, |
| |
| .iva.value = VDD_IVA_DRA752, |
| .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM, |
| .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, |
| .iva.addr = TPS659038_REG_ADDR_SMPS45, |
| .iva.pmic = &tps659038, |
| }; |
| |
| void hw_data_init(void) |
| { |
| *prcm = &dra7xx_prcm; |
| *dplls_data = &dra7xx_dplls; |
| *omap_vcores = &beagle_x15_volts; |
| *ctrl = &dra7xx_ctrl; |
| } |
| |
| int board_init(void) |
| { |
| gpmc_init(); |
| gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100); |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| init_sata(0); |
| /* |
| * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds |
| * This is the POWERHOLD-in-Low behavior. |
| */ |
| palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1); |
| return 0; |
| } |
| |
| void set_muxconf_regs_essential(void) |
| { |
| do_set_mux32((*ctrl)->control_padconf_core_base, |
| early_padconf, ARRAY_SIZE(early_padconf)); |
| } |
| |
| #ifdef CONFIG_IODELAY_RECALIBRATION |
| void recalibrate_iodelay(void) |
| { |
| __recalibrate_iodelay(core_padconf_array_essential, |
| ARRAY_SIZE(core_padconf_array_essential), |
| iodelay_cfg_array, ARRAY_SIZE(iodelay_cfg_array)); |
| } |
| #endif |
| |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) |
| int board_mmc_init(bd_t *bis) |
| { |
| omap_mmc_init(0, 0, 0, -1, -1); |
| omap_mmc_init(1, 0, 0, -1, -1); |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) |
| int spl_start_uboot(void) |
| { |
| /* break into full u-boot on 'c' */ |
| if (serial_tstc() && serial_getc() == 'c') |
| return 1; |
| |
| #ifdef CONFIG_SPL_ENV_SUPPORT |
| env_init(); |
| env_relocate_spec(); |
| if (getenv_yesno("boot_os") != 1) |
| return 1; |
| #endif |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_DRIVER_TI_CPSW |
| |
| /* Delay value to add to calibrated value */ |
| #define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8) |
| #define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8) |
| #define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2) |
| #define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0) |
| #define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0) |
| #define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8) |
| #define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8) |
| #define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2) |
| #define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0) |
| #define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0) |
| |
| static void cpsw_control(int enabled) |
| { |
| /* VTP can be added here */ |
| } |
| |
| static struct cpsw_slave_data cpsw_slaves[] = { |
| { |
| .slave_reg_ofs = 0x208, |
| .sliver_reg_ofs = 0xd80, |
| .phy_addr = 1, |
| }, |
| { |
| .slave_reg_ofs = 0x308, |
| .sliver_reg_ofs = 0xdc0, |
| .phy_addr = 2, |
| }, |
| }; |
| |
| static struct cpsw_platform_data cpsw_data = { |
| .mdio_base = CPSW_MDIO_BASE, |
| .cpsw_base = CPSW_BASE, |
| .mdio_div = 0xff, |
| .channels = 8, |
| .cpdma_reg_ofs = 0x800, |
| .slaves = 1, |
| .slave_data = cpsw_slaves, |
| .ale_reg_ofs = 0xd00, |
| .ale_entries = 1024, |
| .host_port_reg_ofs = 0x108, |
| .hw_stats_reg_ofs = 0x900, |
| .bd_ram_ofs = 0x2000, |
| .mac_control = (1 << 5), |
| .control = cpsw_control, |
| .host_port_num = 0, |
| .version = CPSW_CTRL_VERSION_2, |
| }; |
| |
| int board_eth_init(bd_t *bis) |
| { |
| int ret; |
| uint8_t mac_addr[6]; |
| uint32_t mac_hi, mac_lo; |
| uint32_t ctrl_val; |
| |
| /* try reading mac address from efuse */ |
| mac_lo = readl((*ctrl)->control_core_mac_id_0_lo); |
| mac_hi = readl((*ctrl)->control_core_mac_id_0_hi); |
| mac_addr[0] = (mac_hi & 0xFF0000) >> 16; |
| mac_addr[1] = (mac_hi & 0xFF00) >> 8; |
| mac_addr[2] = mac_hi & 0xFF; |
| mac_addr[3] = (mac_lo & 0xFF0000) >> 16; |
| mac_addr[4] = (mac_lo & 0xFF00) >> 8; |
| mac_addr[5] = mac_lo & 0xFF; |
| |
| if (!getenv("ethaddr")) { |
| printf("<ethaddr> not set. Validating first E-fuse MAC\n"); |
| |
| if (is_valid_ethaddr(mac_addr)) |
| eth_setenv_enetaddr("ethaddr", mac_addr); |
| } |
| |
| mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); |
| mac_hi = readl((*ctrl)->control_core_mac_id_1_hi); |
| mac_addr[0] = (mac_hi & 0xFF0000) >> 16; |
| mac_addr[1] = (mac_hi & 0xFF00) >> 8; |
| mac_addr[2] = mac_hi & 0xFF; |
| mac_addr[3] = (mac_lo & 0xFF0000) >> 16; |
| mac_addr[4] = (mac_lo & 0xFF00) >> 8; |
| mac_addr[5] = mac_lo & 0xFF; |
| |
| if (!getenv("eth1addr")) { |
| if (is_valid_ethaddr(mac_addr)) |
| eth_setenv_enetaddr("eth1addr", mac_addr); |
| } |
| |
| ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); |
| ctrl_val |= 0x22; |
| writel(ctrl_val, (*ctrl)->control_core_control_io1); |
| |
| ret = cpsw_register(&cpsw_data); |
| if (ret < 0) |
| printf("Error %d registering CPSW switch\n", ret); |
| |
| return ret; |
| } |
| #endif |
| |
| #ifdef CONFIG_BOARD_EARLY_INIT_F |
| /* VTT regulator enable */ |
| static inline void vtt_regulator_enable(void) |
| { |
| if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) |
| return; |
| |
| gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); |
| gpio_direction_output(GPIO_DDR_VTT_EN, 1); |
| } |
| |
| int board_early_init_f(void) |
| { |
| vtt_regulator_enable(); |
| return 0; |
| } |
| #endif |