board/ttcontrol/vision2/vision2.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2010
  * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
  *
  * (C) Copyright 2009 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/iomux.h>
 #include <mxc_gpio.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/errno.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
 #include <linux/fb.h>

 DECLARE_GLOBAL_DATA_PTR;

 static u32 system_rev;

 extern int mx51_fb_init(struct fb_videomode *mode);

 static struct fb_videomode nec_nl6448bc26_09c = {
 	"NEC_NL6448BC26-09C",
 	60,	/* Refresh */
 	640,	/* xres */
 	480,	/* yres */
 	37650,	/* pixclock = 26.56Mhz */
 	48,	/* left margin */
 	16,	/* right margin */
 	31,	/* upper margin */
 	12,	/* lower margin */
 	96,	/* hsync-len */
 	2,	/* vsync-len */
 	0,	/* sync */
 	FB_VMODE_NONINTERLACED,	/* vmode */
 	0,	/* flag */
 };

 #ifdef CONFIG_HW_WATCHDOG
 #include <watchdog.h>
 void hw_watchdog_reset(void)
 {
 	int val;

 	/* toggle watchdog trigger pin */
 	val = mxc_gpio_get(66);
 	val = val ? 0 : 1;
 	mxc_gpio_set(66, val);
 }
 #endif

 static void init_drive_strength(void)
 {
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
 	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);

 	/* Setting pad options */
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
 		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
 		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
 }

 u32 get_board_rev(void)
 {
 	system_rev = get_cpu_rev();

 	return system_rev;
 }

 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
 		PHYS_SDRAM_1_SIZE);

 	return 0;
 }

 static void setup_weim(void)
 {
 	struct weim  *pweim = (struct weim *)WEIM_BASE_ADDR;

 	pweim->cs0gcr1 = 0x004100b9;
 	pweim->cs0gcr2 = 0x00000001;
 	pweim->cs0rcr1 = 0x0a018000;
 	pweim->cs0rcr2 = 0;
 	pweim->cs0wcr1 = 0x0704a240;
 }

 static void setup_uart(void)
 {
 	unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
 			 PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST;
 	/* console RX on Pin EIM_D25 */
 	mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
 	/* console TX on Pin EIM_D26 */
 	mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
 }

 #ifdef CONFIG_MXC_SPI
 void spi_io_init(void)
 {
 	/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
 	mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
 		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);

 	/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
 		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);

 	/* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
 		PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
 		PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);

 	/*
 	 * SS1 will be used as GPIO because of uninterrupted
 	 * long SPI transmissions (GPIO4_25)
 	 */
 	mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
 		PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
 		PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);

 	/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
 	mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
 		PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
 		PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);

 	/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
 	mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
 		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
 }

 static void reset_peripherals(int reset)
 {
 	if (reset) {

 		/* reset_n is on NANDF_D15 */
 		mxc_gpio_set(89, 0);
 		mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);

 #ifdef CONFIG_VISION2_HW_1_0
 		/*
 		 * set FEC Configuration lines
 		 * set levels of FEC config lines
 		 */
 		mxc_gpio_set(75, 0);
 		mxc_gpio_set(74, 1);
 		mxc_gpio_set(95, 1);
 		mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
 		mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
 		mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);

 		/* set direction of FEC config lines */
 		mxc_gpio_set(59, 0);
 		mxc_gpio_set(60, 0);
 		mxc_gpio_set(61, 0);
 		mxc_gpio_set(55, 1);
 		mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
 		mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
 		mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
 		mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);

 		/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
 		mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
 		/* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
 		mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
 		/* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
 		mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
 		/* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
 		mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
 		/* FEC_COL  - sel GPIO (3-10) for configuration -> 1 */
 		mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
 		/* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
 		mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
 		/* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
 		mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
 #endif

 		/*
 		 * activate reset_n pin
 		 * Select mux mode: ALT3 mux port: NAND D15
 		 */
 		mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
 		mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
 			PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
 	} else {
 		/* set FEC Control lines */
 		mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
 		udelay(500);

 #ifdef CONFIG_VISION2_HW_1_0
 		/* FEC RDATA[3] */
 		mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
 		mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);

 		/* FEC RDATA[2] */
 		mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
 		mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);

 		/* FEC RDATA[1] */
 		mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
 		mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);

 		/* FEC RDATA[0] */
 		mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
 		mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);

 		/* FEC RX_CLK */
 		mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
 		mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);

 		/* FEC RX_ER */
 		mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
 		mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);

 		/* FEC COL */
 		mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
 		mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
 #endif
 	}
 }

 static void power_init_mx51(void)
 {
 	unsigned int val;

 	/* Write needed to Power Gate 2 register */
 	val = pmic_reg_read(REG_POWER_MISC);

 	/* enable VCAM with 2.775V to enable read from PMIC */
 	val = VCAMCONFIG | VCAMEN;
 	pmic_reg_write(REG_MODE_1, val);

 	/*
 	 * Set switchers in Auto in NORMAL mode & STANDBY mode
 	 * Setup the switcher mode for SW1 & SW2
 	 */
 	val = pmic_reg_read(REG_SW_4);
 	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
 		(SWMODE_MASK << SWMODE2_SHIFT)));
 	val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
 		(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
 	pmic_reg_write(REG_SW_4, val);

 	/* Setup the switcher mode for SW3 & SW4 */
 	val = pmic_reg_read(REG_SW_5);
 	val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
 		(SWMODE_MASK << SWMODE3_SHIFT));
 	val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
 		(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
 	pmic_reg_write(REG_SW_5, val);


 	/* Set VGEN3 to 1.8V, VCAM to 3.0V */
 	val = pmic_reg_read(REG_SETTING_0);
 	val &= ~(VCAM_MASK | VGEN3_MASK);
 	val |= VCAM_3_0;
 	pmic_reg_write(REG_SETTING_0, val);

 	/* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */
 	val = pmic_reg_read(REG_SETTING_1);
 	val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
 	val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8;
 	pmic_reg_write(REG_SETTING_1, val);

 	/* Configure VGEN3 and VCAM regulators to use external PNP */
 	val = VGEN3CONFIG | VCAMCONFIG;
 	pmic_reg_write(REG_MODE_1, val);
 	udelay(200);

 	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
 	val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
 		VVIDEOEN | VAUDIOEN  | VSDEN;
 	pmic_reg_write(REG_MODE_1, val);

 	val = pmic_reg_read(REG_POWER_CTL2);
 	val |= WDIRESET;
 	pmic_reg_write(REG_POWER_CTL2, val);

 	udelay(2500);

 }
 #endif

 static void setup_gpios(void)
 {
 	unsigned int i;

 	/* CAM_SUP_DISn, GPIO1_7 */
 	mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);

 	/* DAB Display EN, GPIO3_1 */
 	mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
 	mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);

 	/* WDOG_TRIGGER, GPIO3_2 */
 	mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
 	mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);

 	/* Now we need to trigger the watchdog */
 	WATCHDOG_RESET();

 	/* Display2 TxEN, GPIO3_3 */
 	mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
 	mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);

 	/* DAB Light EN, GPIO3_4 */
 	mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
 	mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);

 	/* AUDIO_MUTE, GPIO3_5 */
 	mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
 	mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);

 	/* SPARE_OUT, GPIO3_6 */
 	mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
 	mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);

 	/* BEEPER_EN, GPIO3_26 */
 	mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);

 	/* POWER_OFF, GPIO3_27 */
 	mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);

 	/* FRAM_WE, GPIO3_30 */
 	mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);

 	/* EXPANSION_EN, GPIO4_26 */
 	mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);

 	/* PWM Output GPIO1_2 */
 	mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1);

 	/*
 	 * Set GPIO1_4 to high and output; it is used to reset
 	 * the system on reboot
 	 */
 	mxc_gpio_set(4, 1);
 	mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);

 	mxc_gpio_set(7, 0);
 	mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
 	for (i = 65; i < 71; i++) {
 		mxc_gpio_set(i, 0);
 		mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
 	}

 	mxc_gpio_set(94, 0);
 	mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);

 	/* Set POWER_OFF high */
 	mxc_gpio_set(91, 1);
 	mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);

 	mxc_gpio_set(90, 0);
 	mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);

 	mxc_gpio_set(122, 0);
 	mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);

 	mxc_gpio_set(121, 1);
 	mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);

 	WATCHDOG_RESET();
 }

 static void setup_fec(void)
 {
 	/*FEC_MDIO*/
 	mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);

 	/*FEC_MDC*/
 	mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);

 	/* FEC RDATA[3] */
 	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);

 	/* FEC RDATA[2] */
 	mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);

 	/* FEC RDATA[1] */
 	mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);

 	/* FEC RDATA[0] */
 	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);

 	/* FEC TDATA[3] */
 	mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);

 	/* FEC TDATA[2] */
 	mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);

 	/* FEC TDATA[1] */
 	mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);

 	/* FEC TDATA[0] */
 	mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);

 	/* FEC TX_EN */
 	mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);

 	/* FEC TX_ER */
 	mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);

 	/* FEC TX_CLK */
 	mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);

 	/* FEC TX_COL */
 	mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);

 	/* FEC RX_CLK */
 	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);

 	/* FEC RX_CRS */
 	mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);

 	/* FEC RX_ER */
 	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
 	mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);

 	/* FEC RX_DV */
 	mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
 	mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
 }

 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{MMC_SDHC1_BASE_ADDR, 1},
 };

 int get_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;

 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		*cd = mxc_gpio_get(0);
 	else
 		*cd = 0;

 	return 0;
 }

 #ifdef CONFIG_FSL_ESDHC
 int board_mmc_init(bd_t *bis)
 {
 	mxc_request_iomux(MX51_PIN_SD1_CMD,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_request_iomux(MX51_PIN_SD1_CLK,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_request_iomux(MX51_PIN_SD1_DATA0,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_request_iomux(MX51_PIN_SD1_DATA1,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_request_iomux(MX51_PIN_SD1_DATA2,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_request_iomux(MX51_PIN_SD1_DATA3,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
 		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 		PAD_CTL_PUE_PULL |
 		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
 		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 		PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
 		PAD_CTL_PUE_PULL |
 		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
 		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 		PAD_CTL_PUE_PULL |
 		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
 		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 		PAD_CTL_PUE_PULL |
 		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
 		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 		PAD_CTL_PUE_PULL |
 		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 	mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
 		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 		PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
 		PAD_CTL_PUE_PULL |
 		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 	mxc_request_iomux(MX51_PIN_GPIO1_0,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
 		PAD_CTL_HYS_ENABLE);
 	mxc_request_iomux(MX51_PIN_GPIO1_1,
 		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 	mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
 		PAD_CTL_HYS_ENABLE);

 	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
 }
 #endif

 int board_early_init_f(void)
 {


 	init_drive_strength();

 	/* Setup debug led */
 	mxc_gpio_set(6, 0);
 	mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
 	mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);

 	/* wait a little while to give the pll time to settle */
 	sdelay(100000);

 	setup_weim();
 	setup_uart();
 	setup_fec();
 	setup_gpios();

 	spi_io_init();

 	return 0;
 }

 static void backlight(int on)
 {
 	if (on) {
 		mxc_gpio_set(65, 1);
 		udelay(10000);
 		mxc_gpio_set(68, 1);
 	} else {
 		mxc_gpio_set(65, 0);
 		mxc_gpio_set(68, 0);
 	}
 }

 void lcd_enable(void)
 {
 	int ret;

 	mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
 	mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);

 	mxc_gpio_set(2, 1);
 	mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);

 	ret = mx51_fb_init(&nec_nl6448bc26_09c);
 	if (ret)
 		puts("LCD cannot be configured\n");
 }

 int board_init(void)
 {
 	gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2;	/* board id for linux */
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

 	return 0;
 }

 int board_late_init(void)
 {
 	power_init_mx51();

 	reset_peripherals(1);
 	udelay(2000);
 	reset_peripherals(0);
 	udelay(2000);

 	/* Early revisions require a second reset */
 #ifdef CONFIG_VISION2_HW_1_0
 	reset_peripherals(1);
 	udelay(2000);
 	reset_peripherals(0);
 	udelay(2000);
 #endif

 	return 0;
 }

 int checkboard(void)
 {
 	puts("Board: TTControl Vision II CPU V\n");

 	return 0;
 }

 int do_vision_lcd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int on;

 	if (argc < 2)
 		return cmd_usage(cmdtp);

 	on = (strcmp(argv[1], "on") == 0);
 	backlight(on);

 	return 0;
 }

 U_BOOT_CMD(
 	lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd,
 	"Vision2 Backlight",
 	"lcdbl [on|off]\n"
 );
	/*
	* (C) Copyright 2010
	* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
	*
	* (C) Copyright 2009 Freescale Semiconductor, Inc.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <asm/io.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/mx5x_pins.h>
	#include <asm/arch/crm_regs.h>
	#include <asm/arch/iomux.h>
	#include <mxc_gpio.h>
	#include <asm/arch/sys_proto.h>
	#include <asm/errno.h>
	#include <i2c.h>
	#include <mmc.h>
	#include <fsl_esdhc.h>
	#include <fsl_pmic.h>
	#include <mc13892.h>
	#include <linux/fb.h>

	DECLARE_GLOBAL_DATA_PTR;

	static u32 system_rev;

	extern int mx51_fb_init(struct fb_videomode *mode);

	static struct fb_videomode nec_nl6448bc26_09c = {
	"NEC_NL6448BC26-09C",
	60, /* Refresh */
	640, /* xres */
	480, /* yres */
	37650, /* pixclock = 26.56Mhz */
	48, /* left margin */
	16, /* right margin */
	31, /* upper margin */
	12, /* lower margin */
	96, /* hsync-len */
	2, /* vsync-len */
	0, /* sync */
	FB_VMODE_NONINTERLACED, /* vmode */
	0, /* flag */
	};

	#ifdef CONFIG_HW_WATCHDOG
	#include <watchdog.h>
	void hw_watchdog_reset(void)
	{
	int val;

	/* toggle watchdog trigger pin */
	val = mxc_gpio_get(66);
	val = val ? 0 : 1;
	mxc_gpio_set(66, val);
	}
	#endif

	static void init_drive_strength(void)
	{
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);

	/* Setting pad options */
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
	PAD_CTL_PKE_ENABLE \| PAD_CTL_PUE_KEEPER \|
	PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST);
	}

	u32 get_board_rev(void)
	{
	system_rev = get_cpu_rev();

	return system_rev;
	}

	int dram_init(void)
	{
	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
	PHYS_SDRAM_1_SIZE);

	return 0;
	}

	static void setup_weim(void)
	{
	struct weim pweim = (struct weim )WEIM_BASE_ADDR;

	pweim->cs0gcr1 = 0x004100b9;
	pweim->cs0gcr2 = 0x00000001;
	pweim->cs0rcr1 = 0x0a018000;
	pweim->cs0rcr2 = 0;
	pweim->cs0wcr1 = 0x0704a240;
	}

	static void setup_uart(void)
	{
	unsigned int pad = PAD_CTL_HYS_ENABLE \| PAD_CTL_PKE_ENABLE \|
	PAD_CTL_PUE_PULL \| PAD_CTL_DRV_HIGH \| PAD_CTL_SRE_FAST;
	/* console RX on Pin EIM_D25 */
	mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
	/* console TX on Pin EIM_D26 */
	mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
	}

	#ifdef CONFIG_MXC_SPI
	void spi_io_init(void)
	{
	/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
	mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
	PAD_CTL_HYS_ENABLE \| PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST);

	/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
	PAD_CTL_HYS_ENABLE \| PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST);

	/* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
	PAD_CTL_HYS_ENABLE \| PAD_CTL_PKE_ENABLE \|
	PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST);

	/*
	* SS1 will be used as GPIO because of uninterrupted
	* long SPI transmissions (GPIO4_25)
	*/
	mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
	PAD_CTL_HYS_ENABLE \| PAD_CTL_PKE_ENABLE \|
	PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST);

	/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
	mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
	PAD_CTL_HYS_ENABLE \| PAD_CTL_PKE_ENABLE \|
	PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST);

	/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
	mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
	PAD_CTL_HYS_ENABLE \| PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST);
	}

	static void reset_peripherals(int reset)
	{
	if (reset) {

	/* reset_n is on NANDF_D15 */
	mxc_gpio_set(89, 0);
	mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);

	#ifdef CONFIG_VISION2_HW_1_0
	/*
	* set FEC Configuration lines
	* set levels of FEC config lines
	*/
	mxc_gpio_set(75, 0);
	mxc_gpio_set(74, 1);
	mxc_gpio_set(95, 1);
	mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
	mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
	mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);

	/* set direction of FEC config lines */
	mxc_gpio_set(59, 0);
	mxc_gpio_set(60, 0);
	mxc_gpio_set(61, 0);
	mxc_gpio_set(55, 1);
	mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
	mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
	mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
	mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);

	/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
	mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
	/* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
	mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
	/* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
	/* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
	/* FEC_COL - sel GPIO (3-10) for configuration -> 1 */
	mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
	/* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
	/* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
	#endif

	/*
	* activate reset_n pin
	* Select mux mode: ALT3 mux port: NAND D15
	*/
	mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
	PAD_CTL_DRV_VOT_HIGH \| PAD_CTL_DRV_MAX);
	} else {
	/* set FEC Control lines */
	mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
	udelay(500);

	#ifdef CONFIG_VISION2_HW_1_0
	/* FEC RDATA[3] */
	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);

	/* FEC RDATA[2] */
	mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);

	/* FEC RDATA[1] */
	mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);

	/* FEC RDATA[0] */
	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);

	/* FEC RX_CLK */
	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);

	/* FEC RX_ER */
	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);

	/* FEC COL */
	mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
	#endif
	}
	}

	static void power_init_mx51(void)
	{
	unsigned int val;

	/* Write needed to Power Gate 2 register */
	val = pmic_reg_read(REG_POWER_MISC);

	/* enable VCAM with 2.775V to enable read from PMIC */
	val = VCAMCONFIG \| VCAMEN;
	pmic_reg_write(REG_MODE_1, val);

	/*
	* Set switchers in Auto in NORMAL mode & STANDBY mode
	* Setup the switcher mode for SW1 & SW2
	*/
	val = pmic_reg_read(REG_SW_4);
	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) \|
	(SWMODE_MASK << SWMODE2_SHIFT)));
	val \|= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) \|
	(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
	pmic_reg_write(REG_SW_4, val);

	/* Setup the switcher mode for SW3 & SW4 */
	val = pmic_reg_read(REG_SW_5);
	val &= ~((SWMODE_MASK << SWMODE4_SHIFT) \|
	(SWMODE_MASK << SWMODE3_SHIFT));
	val \|= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) \|
	(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
	pmic_reg_write(REG_SW_5, val);


	/* Set VGEN3 to 1.8V, VCAM to 3.0V */
	val = pmic_reg_read(REG_SETTING_0);
	val &= ~(VCAM_MASK \| VGEN3_MASK);
	val \|= VCAM_3_0;
	pmic_reg_write(REG_SETTING_0, val);

	/* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */
	val = pmic_reg_read(REG_SETTING_1);
	val &= ~(VVIDEO_MASK \| VSD_MASK \| VAUDIO_MASK);
	val \|= VVIDEO_2_775 \| VAUDIO_3_0 \| VSD_1_8;
	pmic_reg_write(REG_SETTING_1, val);

	/* Configure VGEN3 and VCAM regulators to use external PNP */
	val = VGEN3CONFIG \| VCAMCONFIG;
	pmic_reg_write(REG_MODE_1, val);
	udelay(200);

	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
	val = VGEN3EN \| VGEN3CONFIG \| VCAMEN \| VCAMCONFIG \|
	VVIDEOEN \| VAUDIOEN \| VSDEN;
	pmic_reg_write(REG_MODE_1, val);

	val = pmic_reg_read(REG_POWER_CTL2);
	val \|= WDIRESET;
	pmic_reg_write(REG_POWER_CTL2, val);

	udelay(2500);

	}
	#endif

	static void setup_gpios(void)
	{
	unsigned int i;

	/* CAM_SUP_DISn, GPIO1_7 */
	mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);

	/* DAB Display EN, GPIO3_1 */
	mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
	mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);

	/* WDOG_TRIGGER, GPIO3_2 */
	mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
	mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);

	/* Now we need to trigger the watchdog */
	WATCHDOG_RESET();

	/* Display2 TxEN, GPIO3_3 */
	mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
	mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);

	/* DAB Light EN, GPIO3_4 */
	mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
	mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);

	/* AUDIO_MUTE, GPIO3_5 */
	mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
	mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);

	/* SPARE_OUT, GPIO3_6 */
	mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
	mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);

	/* BEEPER_EN, GPIO3_26 */
	mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);

	/* POWER_OFF, GPIO3_27 */
	mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);

	/* FRAM_WE, GPIO3_30 */
	mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);

	/* EXPANSION_EN, GPIO4_26 */
	mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);

	/* PWM Output GPIO1_2 */
	mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1);

	/*
	* Set GPIO1_4 to high and output; it is used to reset
	* the system on reboot
	*/
	mxc_gpio_set(4, 1);
	mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);

	mxc_gpio_set(7, 0);
	mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
	for (i = 65; i < 71; i++) {
	mxc_gpio_set(i, 0);
	mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
	}

	mxc_gpio_set(94, 0);
	mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);

	/* Set POWER_OFF high */
	mxc_gpio_set(91, 1);
	mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);

	mxc_gpio_set(90, 0);
	mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);

	mxc_gpio_set(122, 0);
	mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);

	mxc_gpio_set(121, 1);
	mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);

	WATCHDOG_RESET();
	}

	static void setup_fec(void)
	{
	/FEC_MDIO/
	mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);

	/FEC_MDC/
	mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);

	/* FEC RDATA[3] */
	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);

	/* FEC RDATA[2] */
	mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);

	/* FEC RDATA[1] */
	mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);

	/* FEC RDATA[0] */
	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);

	/* FEC TDATA[3] */
	mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);

	/* FEC TDATA[2] */
	mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);

	/* FEC TDATA[1] */
	mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);

	/* FEC TDATA[0] */
	mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);

	/* FEC TX_EN */
	mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);

	/* FEC TX_ER */
	mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);

	/* FEC TX_CLK */
	mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);

	/* FEC TX_COL */
	mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);

	/* FEC RX_CLK */
	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
	mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);

	/* FEC RX_CRS */
	mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);

	/* FEC RX_ER */
	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
	mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);

	/* FEC RX_DV */
	mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
	mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
	}

	struct fsl_esdhc_cfg esdhc_cfg[1] = {
	{MMC_SDHC1_BASE_ADDR, 1},
	};

	int get_mmc_getcd(u8 cd, struct mmc mmc)
	{
	struct fsl_esdhc_cfg cfg = (struct fsl_esdhc_cfg )mmc->priv;

	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
	*cd = mxc_gpio_get(0);
	else
	*cd = 0;

	return 0;
	}

	#ifdef CONFIG_FSL_ESDHC
	int board_mmc_init(bd_t *bis)
	{
	mxc_request_iomux(MX51_PIN_SD1_CMD,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_CLK,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA0,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA1,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA2,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_request_iomux(MX51_PIN_SD1_DATA3,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_NONE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_47K_PU \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
	PAD_CTL_DRV_MAX \| PAD_CTL_DRV_VOT_HIGH \|
	PAD_CTL_HYS_ENABLE \| PAD_CTL_100K_PD \|
	PAD_CTL_PUE_PULL \|
	PAD_CTL_PKE_ENABLE \| PAD_CTL_SRE_FAST);
	mxc_request_iomux(MX51_PIN_GPIO1_0,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
	PAD_CTL_HYS_ENABLE);
	mxc_request_iomux(MX51_PIN_GPIO1_1,
	IOMUX_CONFIG_ALT0 \| IOMUX_CONFIG_SION);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
	PAD_CTL_HYS_ENABLE);

	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
	}
	#endif

	int board_early_init_f(void)
	{


	init_drive_strength();

	/* Setup debug led */
	mxc_gpio_set(6, 0);
	mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
	mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
	mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX \| PAD_CTL_SRE_FAST);

	/* wait a little while to give the pll time to settle */
	sdelay(100000);

	setup_weim();
	setup_uart();
	setup_fec();
	setup_gpios();

	spi_io_init();

	return 0;
	}

	static void backlight(int on)
	{
	if (on) {
	mxc_gpio_set(65, 1);
	udelay(10000);
	mxc_gpio_set(68, 1);
	} else {
	mxc_gpio_set(65, 0);
	mxc_gpio_set(68, 0);
	}
	}

	void lcd_enable(void)
	{
	int ret;

	mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
	mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);

	mxc_gpio_set(2, 1);
	mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);

	ret = mx51_fb_init(&nec_nl6448bc26_09c);
	if (ret)
	puts("LCD cannot be configured\n");
	}

	int board_init(void)
	{
	gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */
	/* address of boot parameters */
	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

	return 0;
	}

	int board_late_init(void)
	{
	power_init_mx51();

	reset_peripherals(1);
	udelay(2000);
	reset_peripherals(0);
	udelay(2000);

	/* Early revisions require a second reset */
	#ifdef CONFIG_VISION2_HW_1_0
	reset_peripherals(1);
	udelay(2000);
	reset_peripherals(0);
	udelay(2000);
	#endif

	return 0;
	}

	int checkboard(void)
	{
	puts("Board: TTControl Vision II CPU V\n");

	return 0;
	}

	int do_vision_lcd(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	int on;

	if (argc < 2)
	return cmd_usage(cmdtp);

	on = (strcmp(argv[1], "on") == 0);
	backlight(on);

	return 0;
	}

	U_BOOT_CMD(
	lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd,
	"Vision2 Backlight",
	"lcdbl [on\|off]\n"
	);