blob: a7b6e70f497648291c8b3c5d18e2221a9acafeff [file] [log] [blame]
/*
* (c) 2010 Graf-Syteco, Matthias Weisser
* <weisserm@arcor.de>
*
* (C) Copyright 2007, mycable GmbH
* Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/mb86r0x.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
struct mb86r0x_ccnt * ccnt = (struct mb86r0x_ccnt *)
MB86R0x_CCNT_BASE;
/* We select mode 0 for group 2 and mode 1 for group 4 */
writel(0x00000010, &ccnt->cmux_md);
gd->flags = 0;
gd->bd->bi_arch_number = MACH_TYPE_JADECPU;
gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000;
icache_enable();
dcache_enable();
return 0;
}
static void setup_display_power(uint32_t pwr_bit, char *pwm_opts,
unsigned long pwm_base)
{
struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
MB86R0x_GPIO_BASE;
struct mb86r0x_pwm *pwm = (struct mb86r0x_pwm *) pwm_base;
const char *e;
writel(readl(&gpio->gpdr2) | pwr_bit, &gpio->gpdr2);
e = getenv(pwm_opts);
if (e != NULL) {
const char *s;
uint32_t freq, init;
freq = 0;
init = 0;
s = strchr(e, 'f');
if (s != NULL)
freq = simple_strtol(s + 2, NULL, 0);
s = strchr(e, 'i');
if (s != NULL)
init = simple_strtol(s + 2, NULL, 0);
if (freq > 0) {
writel(CONFIG_MB86R0x_IOCLK / 1000 / freq,
&pwm->bcr);
writel(1002, &pwm->tpr);
writel(1, &pwm->pr);
writel(init * 10 + 1, &pwm->dr);
writel(1, &pwm->cr);
writel(1, &pwm->sr);
}
}
}
int board_late_init(void)
{
struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
MB86R0x_GPIO_BASE;
uint32_t in_word;
#ifdef CONFIG_VIDEO_MB86R0xGDC
/* Check if we have valid display settings and turn on power if so */
/* Display 0 */
if (getenv("gs_dsp_0_param") || getenv("videomode"))
setup_display_power((1 << 3), "gs_dsp_0_pwm",
MB86R0x_PWM0_BASE);
/* The corresponding GPIO is always an output */
writel(readl(&gpio->gpddr2) | (1 << 3), &gpio->gpddr2);
/* Display 1 */
if (getenv("gs_dsp_1_param") || getenv("videomode1"))
setup_display_power((1 << 4), "gs_dsp_1_pwm",
MB86R0x_PWM1_BASE);
/* The corresponding GPIO is always an output */
writel(readl(&gpio->gpddr2) | (1 << 4), &gpio->gpddr2);
#endif /* CONFIG_VIDEO_MB86R0xGDC */
/* 5V enable */
writel(readl(&gpio->gpdr1) & ~(1 << 5), &gpio->gpdr1);
writel(readl(&gpio->gpddr1) | (1 << 5), &gpio->gpddr1);
/* We have special boot options if told by GPIOs */
in_word = readl(&gpio->gpdr1);
if ((in_word & 0xC0) == 0xC0) {
setenv("stdin", "serial");
setenv("stdout", "serial");
setenv("stderr", "serial");
setenv("preboot", "run gs_slow_boot");
} else if ((in_word & 0xC0) != 0) {
setenv("stdout", "vga");
setenv("preboot", "run gs_slow_boot");
} else {
setenv("stdin", "serial");
setenv("stdout", "serial");
setenv("stderr", "serial");
if (getenv("gs_devel")) {
setenv("preboot", "run gs_slow_boot");
} else {
setenv("preboot", "run gs_fast_boot");
}
}
return 0;
}
int misc_init_r(void)
{
return 0;
}
/*
* DRAM configuration
*/
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM,
PHYS_SDRAM_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = gd->ram_size;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}