include/configs/pleb2.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2002
  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
  *
  * Configuration settings for the PLEB 2 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_PXA250		1	/* This is an PXA255 CPU    */
 #define CONFIG_PLEB2		1	/* on an PLEB2 Board	    */
 #undef CONFIG_LCD
 #undef CONFIG_MMC
 #define BOARD_LATE_INIT		1

 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */

 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

 /*
  * Hardware drivers
  */

 /* None - PLEB 2 doesn't have any of this.
    #define CONFIG_DRIVER_LAN91C96
    #define CONFIG_LAN91C96_BASE 0x0C000000 */

 /*
  * select serial console configuration
  */
 #define CONFIG_FFUART	       1       /* we use FFUART on PLEB 2 */

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 #define CONFIG_BAUDRATE		115200


 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME


 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #undef CONFIG_CMD_NET


 #define CONFIG_BOOTDELAY	3
 #define CONFIG_ETHADDR		08:00:3e:26:0a:5b
 #define CONFIG_NETMASK		255.255.0.0
 #define CONFIG_IPADDR		192.168.0.21
 #define CONFIG_SERVERIP		192.168.0.250
 #define CONFIG_BOOTCOMMAND	"bootm 40000"
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200"

 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
 #define CONFIG_SETUP_MEMORY_TAGS

 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER		1
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

 #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
 #define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
 #define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CONFIG_SYS_DEVICE_NULLDEV	1

 #define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/

 #define CONFIG_SYS_LOAD_ADDR		0xa2000000	/* default load address */

 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 200/200/100 MHz */

 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #ifdef CONFIG_MMC
 #define CONFIG_PXA_MMC
 #define CONFIG_CMD_MMC
 #endif

 /*
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
 #ifdef CONFIG_USE_IRQ
 #define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
 #define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
 #endif

 /*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
 #define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
 #define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
 #define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
 #define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
 #define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
 #define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
 #define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */

 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
 #define PHYS_FLASH_SIZE		0x00800000 /* 4 MB */

 /* Not entirely sure about this - DS/CHC */
 #define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
 #define PHYS_FLASH_SECT_SIZE	0x00010000 /* 64 KB sectors (x2) */

 #define CONFIG_SYS_DRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_DRAM_SIZE		PHYS_SDRAM_1_SIZE

 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE

 /*
  * GPIO settings
  */
 #define CONFIG_SYS_GPSR0_VAL		0x00000000  /* Don't set anything */
 #define CONFIG_SYS_GPSR1_VAL		0x00000080
 #define CONFIG_SYS_GPSR2_VAL		0x00000000

 #define CONFIG_SYS_GPCR0_VAL		0x00000000  /* Don't clear anything */
 #define CONFIG_SYS_GPCR1_VAL		0x00000000
 #define CONFIG_SYS_GPCR2_VAL		0x00000000

 #define CONFIG_SYS_GPDR0_VAL		0x00000000
 #define CONFIG_SYS_GPDR1_VAL		0x000007C3
 #define CONFIG_SYS_GPDR2_VAL		0x00000000

 /* Edge detect registers (these are set by the kernel) */
 #define CONFIG_SYS_GRER0_VAL	    0x00000000
 #define CONFIG_SYS_GRER1_VAL	    0x00000000
 #define CONFIG_SYS_GRER2_VAL	    0x00000000
 #define CONFIG_SYS_GFER0_VAL	    0x00000000
 #define CONFIG_SYS_GFER1_VAL	    0x00000000
 #define CONFIG_SYS_GFER2_VAL	    0x00000000

 #define CONFIG_SYS_GAFR0_L_VAL		0x00000000
 #define CONFIG_SYS_GAFR0_U_VAL		0x00000000
 #define CONFIG_SYS_GAFR1_L_VAL		0x00008010  /* Use FF UART Send and Receive */
 #define CONFIG_SYS_GAFR1_U_VAL		0x00000000
 #define CONFIG_SYS_GAFR2_L_VAL		0x00000000
 #define CONFIG_SYS_GAFR2_U_VAL		0x00000000

 #define CONFIG_SYS_PSSR_VAL		0x20
 #define CONFIG_SYS_CCCR_VAL	    0x00000141	/* 100 MHz memory, 200 MHz CPU	*/
 #define CONFIG_SYS_CKEN_VAL	    0x00000060	/* FFUART and STUART enabled	*/
 #define CONFIG_SYS_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/

 /*
  * Memory settings
  */
 #define CONFIG_SYS_MSC0_VAL		0x00007FF0 /* Not properly calculated - FIXME (DS) */
 #define CONFIG_SYS_MSC1_VAL		0x00000000
 #define CONFIG_SYS_MSC2_VAL		0x00000000

 #define CONFIG_SYS_MDCNFG_VAL		0x00000aC9 /* Memory timings for the SDRAM.
 					      tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */

 #define CONFIG_SYS_MDREFR_VAL		0x00403018 /* Initial setting, individual	*/
 					   /* bits set in lowlevel_init.S	*/
 #define CONFIG_SYS_MDMRS_VAL		0x00000000

 /*
  * PCMCIA and CF Interfaces
  */
 #define CONFIG_SYS_MECR_VAL		0x00000000  /* Hangover from Lubbock.
 					       Needs calculating. (DS/CHC) */
 #define CONFIG_SYS_MCMEM0_VAL		0x00010504
 #define CONFIG_SYS_MCMEM1_VAL		0x00010504
 #define CONFIG_SYS_MCATT0_VAL		0x00010504
 #define CONFIG_SYS_MCATT1_VAL		0x00010504
 #define CONFIG_SYS_MCIO0_VAL		0x00004715
 #define CONFIG_SYS_MCIO1_VAL		0x00004715

 /*
  * FLASH and environment organization
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/

 /* timeout values are in ticks */
 /* FIXME */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */

 /* Flash protection */
 #define CONFIG_SYS_FLASH_PROTECTION	1

 /* FIXME */
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x3C000)	/* Addr of Environment Sector	*/
 #define CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment */
 #define CONFIG_ENV_SECT_SIZE	0x20000

 /* Option added to get around byte ordering issues in the flash driver */
 #define CONFIG_SYS_LITTLE_ENDIAN	1

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2002
	* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
	*
	* (C) Copyright 2002
	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	* Marius Groeger <mgroeger@sysgo.de>
	*
	* Configuration settings for the PLEB 2 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_PXA250 1 /* This is an PXA255 CPU */
	#define CONFIG_PLEB2 1 /* on an PLEB2 Board */
	#undef CONFIG_LCD
	#undef CONFIG_MMC
	#define BOARD_LATE_INIT 1

	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

	/*
	* Hardware drivers
	*/

	/* None - PLEB 2 doesn't have any of this.
	#define CONFIG_DRIVER_LAN91C96
	#define CONFIG_LAN91C96_BASE 0x0C000000 */

	/*
	* select serial console configuration
	*/
	#define CONFIG_FFUART 1 /* we use FFUART on PLEB 2 */

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	#define CONFIG_BAUDRATE 115200


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#undef CONFIG_CMD_NET


	#define CONFIG_BOOTDELAY 3
	#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
	#define CONFIG_NETMASK 255.255.0.0
	#define CONFIG_IPADDR 192.168.0.21
	#define CONFIG_SERVERIP 192.168.0.250
	#define CONFIG_BOOTCOMMAND "bootm 40000"
	#define CONFIG_BOOTARGS "root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200"

	#define CONFIG_CMDLINE_TAG
	#define CONFIG_INITRD_TAG
	#define CONFIG_SETUP_MEMORY_TAGS

	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	#endif

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_HUSH_PARSER 1
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#ifdef CONFIG_SYS_HUSH_PARSER
	#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
	#else
	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	#endif
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	#define CONFIG_SYS_DEVICE_NULLDEV 1

	#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */

	#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */

	#define CONFIG_SYS_HZ 1000
	#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */

	/* valid baudrates */
	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	#ifdef CONFIG_MMC
	#define CONFIG_PXA_MMC
	#define CONFIG_CMD_MMC
	#endif

	/*
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (1281024) / regular stack */
	#ifdef CONFIG_USE_IRQ
	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	#endif

	/*
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
	#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
	#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
	#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
	#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
	#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
	#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
	#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
	#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */

	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
	#define PHYS_FLASH_SIZE 0x00800000 /* 4 MB */

	/* Not entirely sure about this - DS/CHC */
	#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
	#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */

	#define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1
	#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE

	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE

	/*
	* GPIO settings
	*/
	#define CONFIG_SYS_GPSR0_VAL 0x00000000 /* Don't set anything */
	#define CONFIG_SYS_GPSR1_VAL 0x00000080
	#define CONFIG_SYS_GPSR2_VAL 0x00000000

	#define CONFIG_SYS_GPCR0_VAL 0x00000000 /* Don't clear anything */
	#define CONFIG_SYS_GPCR1_VAL 0x00000000
	#define CONFIG_SYS_GPCR2_VAL 0x00000000

	#define CONFIG_SYS_GPDR0_VAL 0x00000000
	#define CONFIG_SYS_GPDR1_VAL 0x000007C3
	#define CONFIG_SYS_GPDR2_VAL 0x00000000

	/* Edge detect registers (these are set by the kernel) */
	#define CONFIG_SYS_GRER0_VAL 0x00000000
	#define CONFIG_SYS_GRER1_VAL 0x00000000
	#define CONFIG_SYS_GRER2_VAL 0x00000000
	#define CONFIG_SYS_GFER0_VAL 0x00000000
	#define CONFIG_SYS_GFER1_VAL 0x00000000
	#define CONFIG_SYS_GFER2_VAL 0x00000000

	#define CONFIG_SYS_GAFR0_L_VAL 0x00000000
	#define CONFIG_SYS_GAFR0_U_VAL 0x00000000
	#define CONFIG_SYS_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */
	#define CONFIG_SYS_GAFR1_U_VAL 0x00000000
	#define CONFIG_SYS_GAFR2_L_VAL 0x00000000
	#define CONFIG_SYS_GAFR2_U_VAL 0x00000000

	#define CONFIG_SYS_PSSR_VAL 0x20
	#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */
	#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */
	#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */

	/*
	* Memory settings
	*/
	#define CONFIG_SYS_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */
	#define CONFIG_SYS_MSC1_VAL 0x00000000
	#define CONFIG_SYS_MSC2_VAL 0x00000000

	#define CONFIG_SYS_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM.
	tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */

	#define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual */
	/* bits set in lowlevel_init.S */
	#define CONFIG_SYS_MDMRS_VAL 0x00000000

	/*
	* PCMCIA and CF Interfaces
	*/
	#define CONFIG_SYS_MECR_VAL 0x00000000 /* Hangover from Lubbock.
	Needs calculating. (DS/CHC) */
	#define CONFIG_SYS_MCMEM0_VAL 0x00010504
	#define CONFIG_SYS_MCMEM1_VAL 0x00010504
	#define CONFIG_SYS_MCATT0_VAL 0x00010504
	#define CONFIG_SYS_MCATT1_VAL 0x00010504
	#define CONFIG_SYS_MCIO0_VAL 0x00004715
	#define CONFIG_SYS_MCIO1_VAL 0x00004715

	/*
	* FLASH and environment organization
	*/
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */

	/* timeout values are in ticks */
	/* FIXME */
	#define CONFIG_SYS_FLASH_ERASE_TOUT (25CONFIG_SYS_HZ) / Timeout for Flash Erase */
	#define CONFIG_SYS_FLASH_WRITE_TOUT (25CONFIG_SYS_HZ) / Timeout for Flash Write */

	/* Flash protection */
	#define CONFIG_SYS_FLASH_PROTECTION 1

	/* FIXME */
	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */
	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment */
	#define CONFIG_ENV_SECT_SIZE 0x20000

	/* Option added to get around byte ordering issues in the flash driver */
	#define CONFIG_SYS_LITTLE_ENDIAN 1

	#endif /* __CONFIG_H */