| /* |
| * (C) Copyright 2005 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2004 |
| * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc5xxx.h> |
| #include <pci.h> |
| #include <netdev.h> |
| |
| #define SDRAM_MODE 0x00CD0000 |
| #define SDRAM_CONTROL 0x504F0000 |
| #define SDRAM_CONFIG1 0xD2322800 |
| #define SDRAM_CONFIG2 0x8AD70000 |
| |
| static void sdram_start (int hi_addr) |
| { |
| long hi_addr_bit = hi_addr ? 0x01000000 : 0; |
| |
| /* unlock mode register */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* precharge all banks */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* precharge all banks */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* auto refresh */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| |
| /* set mode register */ |
| *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; |
| __asm__ volatile ("sync"); |
| |
| /* normal operation */ |
| *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; |
| __asm__ volatile ("sync"); |
| } |
| |
| /* |
| * ATTENTION: Although partially referenced initdram does NOT make real use |
| * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE |
| * is something else than 0x00000000. |
| */ |
| phys_size_t initdram (int board_type) |
| { |
| ulong dramsize = 0; |
| ulong dramsize2 = 0; |
| ulong test1, test2; |
| |
| /* setup SDRAM chip selects */ |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */ |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */ |
| __asm__ volatile ("sync"); |
| |
| /* setup config registers */ |
| *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; |
| *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; |
| __asm__ volatile ("sync"); |
| |
| /* find RAM size using SDRAM CS0 only */ |
| sdram_start(0); |
| test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); |
| sdram_start(1); |
| test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); |
| if (test1 > test2) { |
| sdram_start(0); |
| dramsize = test1; |
| } else { |
| dramsize = test2; |
| } |
| |
| /* memory smaller than 1MB is impossible */ |
| if (dramsize < (1 << 20)) { |
| dramsize = 0; |
| } |
| |
| /* set SDRAM CS0 size according to the amount of RAM found */ |
| if (dramsize > 0) |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; |
| else |
| *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ |
| |
| /* let SDRAM CS1 start right after CS0 */ |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ |
| |
| /* find RAM size using SDRAM CS1 only */ |
| if (!dramsize) |
| sdram_start(0); |
| |
| test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); |
| |
| if (!dramsize) { |
| sdram_start(1); |
| test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); |
| } |
| |
| if (test1 > test2) { |
| sdram_start(0); |
| dramsize2 = test1; |
| } else { |
| dramsize2 = test2; |
| } |
| |
| /* memory smaller than 1MB is impossible */ |
| if (dramsize2 < (1 << 20)) |
| dramsize2 = 0; |
| |
| /* set SDRAM CS1 size according to the amount of RAM found */ |
| if (dramsize2 > 0) { |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize |
| | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); |
| } else { |
| *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ |
| } |
| |
| return dramsize + dramsize2; |
| } |
| |
| int checkboard (void) |
| { |
| puts ("Board: O2DNT\n"); |
| return 0; |
| } |
| |
| void flash_preinit(void) |
| { |
| /* |
| * Now, when we are in RAM, enable flash write |
| * access for detection process. |
| * Note that CS_BOOT cannot be cleared when |
| * executing in flash. |
| */ |
| *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ |
| } |
| |
| void flash_afterinit(ulong size) |
| { |
| if (size == 0x800000) { /* adjust mapping */ |
| *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = |
| START_REG(CONFIG_SYS_BOOTCS_START | size); |
| |
| *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = |
| STOP_REG(CONFIG_SYS_BOOTCS_START | size, size); |
| } |
| } |
| |
| #ifdef CONFIG_PCI |
| static struct pci_controller hose; |
| |
| extern void pci_mpc5xxx_init(struct pci_controller *); |
| |
| void pci_init_board(void) |
| { |
| pci_mpc5xxx_init(&hose); |
| } |
| #endif |
| |
| int board_eth_init(bd_t *bis) |
| { |
| cpu_eth_init(bis); /* Built in FEC comes first */ |
| return pci_eth_init(bis); |
| } |