| /* |
| * Copyright (C) 2006 Freescale Semiconductor, Inc. |
| * |
| * Dave Liu <daveliu@freescale.com> |
| * based on source code of Shlomi Gridish |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include "common.h" |
| #include "malloc.h" |
| #include "asm/errno.h" |
| #include "asm/io.h" |
| #include "asm/immap_qe.h" |
| #include "qe.h" |
| #include "uccf.h" |
| |
| void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf) |
| { |
| out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); |
| } |
| |
| u32 ucc_fast_get_qe_cr_subblock(int ucc_num) |
| { |
| switch (ucc_num) { |
| case 0: return QE_CR_SUBBLOCK_UCCFAST1; |
| case 1: return QE_CR_SUBBLOCK_UCCFAST2; |
| case 2: return QE_CR_SUBBLOCK_UCCFAST3; |
| case 3: return QE_CR_SUBBLOCK_UCCFAST4; |
| case 4: return QE_CR_SUBBLOCK_UCCFAST5; |
| case 5: return QE_CR_SUBBLOCK_UCCFAST6; |
| case 6: return QE_CR_SUBBLOCK_UCCFAST7; |
| case 7: return QE_CR_SUBBLOCK_UCCFAST8; |
| default: return QE_CR_SUBBLOCK_INVALID; |
| } |
| } |
| |
| static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr, |
| u8 *reg_num, u8 *shift) |
| { |
| switch (ucc_num) { |
| case 0: /* UCC1 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr1); |
| *reg_num = 1; |
| *shift = 16; |
| break; |
| case 2: /* UCC3 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr1); |
| *reg_num = 1; |
| *shift = 0; |
| break; |
| case 4: /* UCC5 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr2); |
| *reg_num = 2; |
| *shift = 16; |
| break; |
| case 6: /* UCC7 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr2); |
| *reg_num = 2; |
| *shift = 0; |
| break; |
| case 1: /* UCC2 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr3); |
| *reg_num = 3; |
| *shift = 16; |
| break; |
| case 3: /* UCC4 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr3); |
| *reg_num = 3; |
| *shift = 0; |
| break; |
| case 5: /* UCC6 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr4); |
| *reg_num = 4; |
| *shift = 16; |
| break; |
| case 7: /* UCC8 */ |
| *p_cmxucr = &(qe_immr->qmx.cmxucr4); |
| *reg_num = 4; |
| *shift = 0; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode) |
| { |
| volatile u32 *p_cmxucr = NULL; |
| u8 reg_num = 0; |
| u8 shift = 0; |
| u32 clockBits; |
| u32 clockMask; |
| int source = -1; |
| |
| /* check if the UCC number is in range. */ |
| if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) |
| return -EINVAL; |
| |
| if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { |
| printf("%s: bad comm mode type passed\n", __FUNCTION__); |
| return -EINVAL; |
| } |
| |
| ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); |
| |
| switch (reg_num) { |
| case 1: |
| switch (clock) { |
| case QE_BRG1: source = 1; break; |
| case QE_BRG2: source = 2; break; |
| case QE_BRG7: source = 3; break; |
| case QE_BRG8: source = 4; break; |
| case QE_CLK9: source = 5; break; |
| case QE_CLK10: source = 6; break; |
| case QE_CLK11: source = 7; break; |
| case QE_CLK12: source = 8; break; |
| case QE_CLK15: source = 9; break; |
| case QE_CLK16: source = 10; break; |
| default: source = -1; break; |
| } |
| break; |
| case 2: |
| switch (clock) { |
| case QE_BRG5: source = 1; break; |
| case QE_BRG6: source = 2; break; |
| case QE_BRG7: source = 3; break; |
| case QE_BRG8: source = 4; break; |
| case QE_CLK13: source = 5; break; |
| case QE_CLK14: source = 6; break; |
| case QE_CLK19: source = 7; break; |
| case QE_CLK20: source = 8; break; |
| case QE_CLK15: source = 9; break; |
| case QE_CLK16: source = 10; break; |
| default: source = -1; break; |
| } |
| break; |
| case 3: |
| switch (clock) { |
| case QE_BRG9: source = 1; break; |
| case QE_BRG10: source = 2; break; |
| case QE_BRG15: source = 3; break; |
| case QE_BRG16: source = 4; break; |
| case QE_CLK3: source = 5; break; |
| case QE_CLK4: source = 6; break; |
| case QE_CLK17: source = 7; break; |
| case QE_CLK18: source = 8; break; |
| case QE_CLK7: source = 9; break; |
| case QE_CLK8: source = 10; break; |
| case QE_CLK16: source = 11; break; |
| default: source = -1; break; |
| } |
| break; |
| case 4: |
| switch (clock) { |
| case QE_BRG13: source = 1; break; |
| case QE_BRG14: source = 2; break; |
| case QE_BRG15: source = 3; break; |
| case QE_BRG16: source = 4; break; |
| case QE_CLK5: source = 5; break; |
| case QE_CLK6: source = 6; break; |
| case QE_CLK21: source = 7; break; |
| case QE_CLK22: source = 8; break; |
| case QE_CLK7: source = 9; break; |
| case QE_CLK8: source = 10; break; |
| case QE_CLK16: source = 11; break; |
| default: source = -1; break; |
| } |
| break; |
| default: |
| source = -1; |
| break; |
| } |
| |
| if (source == -1) { |
| printf("%s: Bad combination of clock and UCC\n", __FUNCTION__); |
| return -ENOENT; |
| } |
| |
| clockBits = (u32) source; |
| clockMask = QE_CMXUCR_TX_CLK_SRC_MASK; |
| if (mode == COMM_DIR_RX) { |
| clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */ |
| clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */ |
| } |
| clockBits <<= shift; |
| clockMask <<= shift; |
| |
| out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits); |
| |
| return 0; |
| } |
| |
| static uint ucc_get_reg_baseaddr(int ucc_num) |
| { |
| uint base = 0; |
| |
| /* check if the UCC number is in range */ |
| if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) { |
| printf("%s: the UCC num not in ranges\n", __FUNCTION__); |
| return 0; |
| } |
| |
| switch (ucc_num) { |
| case 0: base = 0x00002000; break; |
| case 1: base = 0x00003000; break; |
| case 2: base = 0x00002200; break; |
| case 3: base = 0x00003200; break; |
| case 4: base = 0x00002400; break; |
| case 5: base = 0x00003400; break; |
| case 6: base = 0x00002600; break; |
| case 7: base = 0x00003600; break; |
| default: break; |
| } |
| |
| base = (uint)qe_immr + base; |
| return base; |
| } |
| |
| void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode) |
| { |
| ucc_fast_t *uf_regs; |
| u32 gumr; |
| |
| uf_regs = uccf->uf_regs; |
| |
| /* Enable reception and/or transmission on this UCC. */ |
| gumr = in_be32(&uf_regs->gumr); |
| if (mode & COMM_DIR_TX) { |
| gumr |= UCC_FAST_GUMR_ENT; |
| uccf->enabled_tx = 1; |
| } |
| if (mode & COMM_DIR_RX) { |
| gumr |= UCC_FAST_GUMR_ENR; |
| uccf->enabled_rx = 1; |
| } |
| out_be32(&uf_regs->gumr, gumr); |
| } |
| |
| void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode) |
| { |
| ucc_fast_t *uf_regs; |
| u32 gumr; |
| |
| uf_regs = uccf->uf_regs; |
| |
| /* Disable reception and/or transmission on this UCC. */ |
| gumr = in_be32(&uf_regs->gumr); |
| if (mode & COMM_DIR_TX) { |
| gumr &= ~UCC_FAST_GUMR_ENT; |
| uccf->enabled_tx = 0; |
| } |
| if (mode & COMM_DIR_RX) { |
| gumr &= ~UCC_FAST_GUMR_ENR; |
| uccf->enabled_rx = 0; |
| } |
| out_be32(&uf_regs->gumr, gumr); |
| } |
| |
| int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret) |
| { |
| ucc_fast_private_t *uccf; |
| ucc_fast_t *uf_regs; |
| |
| if (!uf_info) |
| return -EINVAL; |
| |
| if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { |
| printf("%s: Illagal UCC number!\n", __FUNCTION__); |
| return -EINVAL; |
| } |
| |
| uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t)); |
| if (!uccf) { |
| printf("%s: No memory for UCC fast data structure!\n", |
| __FUNCTION__); |
| return -ENOMEM; |
| } |
| memset(uccf, 0, sizeof(ucc_fast_private_t)); |
| |
| /* Save fast UCC structure */ |
| uccf->uf_info = uf_info; |
| uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num); |
| |
| if (uccf->uf_regs == NULL) { |
| printf("%s: No memory map for UCC fast controller!\n", |
| __FUNCTION__); |
| return -ENOMEM; |
| } |
| |
| uccf->enabled_tx = 0; |
| uccf->enabled_rx = 0; |
| |
| uf_regs = uccf->uf_regs; |
| uccf->p_ucce = (u32 *) &(uf_regs->ucce); |
| uccf->p_uccm = (u32 *) &(uf_regs->uccm); |
| |
| /* Init GUEMR register, UCC both Rx and Tx is Fast protocol */ |
| out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX |
| | UCC_GUEMR_MODE_FAST_TX); |
| |
| /* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */ |
| out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH); |
| |
| /* Set the Giga ethernet VFIFO stuff */ |
| if (uf_info->eth_type == GIGA_ETH) { |
| /* Allocate memory for Tx Virtual Fifo */ |
| uccf->ucc_fast_tx_virtual_fifo_base_offset = |
| qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT, |
| UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); |
| |
| /* Allocate memory for Rx Virtual Fifo */ |
| uccf->ucc_fast_rx_virtual_fifo_base_offset = |
| qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT + |
| UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, |
| UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); |
| |
| /* utfb, urfb are offsets from MURAM base */ |
| out_be32(&uf_regs->utfb, |
| uccf->ucc_fast_tx_virtual_fifo_base_offset); |
| out_be32(&uf_regs->urfb, |
| uccf->ucc_fast_rx_virtual_fifo_base_offset); |
| |
| /* Set Virtual Fifo registers */ |
| out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT); |
| out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT); |
| out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT); |
| out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT); |
| out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT); |
| out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT); |
| } |
| |
| /* Set the Fast ethernet VFIFO stuff */ |
| if (uf_info->eth_type == FAST_ETH) { |
| /* Allocate memory for Tx Virtual Fifo */ |
| uccf->ucc_fast_tx_virtual_fifo_base_offset = |
| qe_muram_alloc(UCC_GETH_UTFS_INIT, |
| UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); |
| |
| /* Allocate memory for Rx Virtual Fifo */ |
| uccf->ucc_fast_rx_virtual_fifo_base_offset = |
| qe_muram_alloc(UCC_GETH_URFS_INIT + |
| UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, |
| UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); |
| |
| /* utfb, urfb are offsets from MURAM base */ |
| out_be32(&uf_regs->utfb, |
| uccf->ucc_fast_tx_virtual_fifo_base_offset); |
| out_be32(&uf_regs->urfb, |
| uccf->ucc_fast_rx_virtual_fifo_base_offset); |
| |
| /* Set Virtual Fifo registers */ |
| out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT); |
| out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT); |
| out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT); |
| out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT); |
| out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT); |
| out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT); |
| } |
| |
| /* Rx clock routing */ |
| if (uf_info->rx_clock != QE_CLK_NONE) { |
| if (ucc_set_clk_src(uf_info->ucc_num, |
| uf_info->rx_clock, COMM_DIR_RX)) { |
| printf("%s: Illegal value for parameter 'RxClock'.\n", |
| __FUNCTION__); |
| return -EINVAL; |
| } |
| } |
| |
| /* Tx clock routing */ |
| if (uf_info->tx_clock != QE_CLK_NONE) { |
| if (ucc_set_clk_src(uf_info->ucc_num, |
| uf_info->tx_clock, COMM_DIR_TX)) { |
| printf("%s: Illegal value for parameter 'TxClock'.\n", |
| __FUNCTION__); |
| return -EINVAL; |
| } |
| } |
| |
| /* Clear interrupt mask register to disable all of interrupts */ |
| out_be32(&uf_regs->uccm, 0x0); |
| |
| /* Writing '1' to clear all of envents */ |
| out_be32(&uf_regs->ucce, 0xffffffff); |
| |
| *uccf_ret = uccf; |
| return 0; |
| } |