| /* |
| * dfu.c -- DFU back-end routines |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * author: Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <errno.h> |
| #include <div64.h> |
| #include <dfu.h> |
| |
| static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE) |
| dfu_file_buf[CONFIG_SYS_DFU_MAX_FILE_SIZE]; |
| static long dfu_file_buf_len; |
| |
| static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| char cmd_buf[DFU_CMD_BUF_SIZE]; |
| u32 blk_start, blk_count; |
| |
| /* |
| * We must ensure that we work in lba_blk_size chunks, so ALIGN |
| * this value. |
| */ |
| *len = ALIGN(*len, dfu->data.mmc.lba_blk_size); |
| |
| blk_start = dfu->data.mmc.lba_start + |
| (u32)lldiv(offset, dfu->data.mmc.lba_blk_size); |
| blk_count = *len / dfu->data.mmc.lba_blk_size; |
| if (blk_start + blk_count > |
| dfu->data.mmc.lba_start + dfu->data.mmc.lba_size) { |
| puts("Request would exceed designated area!\n"); |
| return -EINVAL; |
| } |
| |
| sprintf(cmd_buf, "mmc %s %p %x %x", |
| op == DFU_OP_READ ? "read" : "write", |
| buf, blk_start, blk_count); |
| |
| debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf); |
| return run_command(cmd_buf, 0); |
| } |
| |
| static int mmc_file_buffer(struct dfu_entity *dfu, void *buf, long *len) |
| { |
| if (dfu_file_buf_len + *len > CONFIG_SYS_DFU_MAX_FILE_SIZE) { |
| dfu_file_buf_len = 0; |
| return -EINVAL; |
| } |
| |
| /* Add to the current buffer. */ |
| memcpy(dfu_file_buf + dfu_file_buf_len, buf, *len); |
| dfu_file_buf_len += *len; |
| |
| return 0; |
| } |
| |
| static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu, |
| void *buf, long *len) |
| { |
| char cmd_buf[DFU_CMD_BUF_SIZE]; |
| char *str_env; |
| int ret; |
| |
| switch (dfu->layout) { |
| case DFU_FS_FAT: |
| sprintf(cmd_buf, "fat%s mmc %d:%d 0x%x %s", |
| op == DFU_OP_READ ? "load" : "write", |
| dfu->data.mmc.dev, dfu->data.mmc.part, |
| (unsigned int) buf, dfu->name); |
| if (op == DFU_OP_WRITE) |
| sprintf(cmd_buf + strlen(cmd_buf), " %lx", *len); |
| break; |
| case DFU_FS_EXT4: |
| sprintf(cmd_buf, "ext4%s mmc %d:%d 0x%x /%s", |
| op == DFU_OP_READ ? "load" : "write", |
| dfu->data.mmc.dev, dfu->data.mmc.part, |
| (unsigned int) buf, dfu->name); |
| if (op == DFU_OP_WRITE) |
| sprintf(cmd_buf + strlen(cmd_buf), " %ld", *len); |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| return -1; |
| } |
| |
| debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf); |
| |
| ret = run_command(cmd_buf, 0); |
| if (ret) { |
| puts("dfu: Read error!\n"); |
| return ret; |
| } |
| |
| if (dfu->layout != DFU_RAW_ADDR && op == DFU_OP_READ) { |
| str_env = getenv("filesize"); |
| if (str_env == NULL) { |
| puts("dfu: Wrong file size!\n"); |
| return -1; |
| } |
| *len = simple_strtoul(str_env, NULL, 16); |
| } |
| |
| return ret; |
| } |
| |
| int dfu_write_medium_mmc(struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| int ret = -1; |
| |
| switch (dfu->layout) { |
| case DFU_RAW_ADDR: |
| ret = mmc_block_op(DFU_OP_WRITE, dfu, offset, buf, len); |
| break; |
| case DFU_FS_FAT: |
| case DFU_FS_EXT4: |
| ret = mmc_file_buffer(dfu, buf, len); |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| } |
| |
| return ret; |
| } |
| |
| int dfu_flush_medium_mmc(struct dfu_entity *dfu) |
| { |
| int ret = 0; |
| |
| if (dfu->layout != DFU_RAW_ADDR) { |
| /* Do stuff here. */ |
| ret = mmc_file_op(DFU_OP_WRITE, dfu, &dfu_file_buf, |
| &dfu_file_buf_len); |
| |
| /* Now that we're done */ |
| dfu_file_buf_len = 0; |
| } |
| |
| return ret; |
| } |
| |
| int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, |
| long *len) |
| { |
| int ret = -1; |
| |
| switch (dfu->layout) { |
| case DFU_RAW_ADDR: |
| ret = mmc_block_op(DFU_OP_READ, dfu, offset, buf, len); |
| break; |
| case DFU_FS_FAT: |
| case DFU_FS_EXT4: |
| ret = mmc_file_op(DFU_OP_READ, dfu, buf, len); |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| } |
| |
| return ret; |
| } |
| |
| int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) |
| { |
| int dev, part; |
| struct mmc *mmc; |
| block_dev_desc_t *blk_dev; |
| disk_partition_t partinfo; |
| char *st; |
| |
| dfu->dev_type = DFU_DEV_MMC; |
| st = strsep(&s, " "); |
| if (!strcmp(st, "mmc")) { |
| dfu->layout = DFU_RAW_ADDR; |
| dfu->data.mmc.lba_start = simple_strtoul(s, &s, 16); |
| dfu->data.mmc.lba_size = simple_strtoul(++s, &s, 16); |
| dfu->data.mmc.lba_blk_size = get_mmc_blk_size(dfu->dev_num); |
| } else if (!strcmp(st, "fat")) { |
| dfu->layout = DFU_FS_FAT; |
| } else if (!strcmp(st, "ext4")) { |
| dfu->layout = DFU_FS_EXT4; |
| } else if (!strcmp(st, "part")) { |
| |
| dfu->layout = DFU_RAW_ADDR; |
| |
| dev = simple_strtoul(s, &s, 10); |
| s++; |
| part = simple_strtoul(s, &s, 10); |
| |
| mmc = find_mmc_device(dev); |
| if (mmc == NULL || mmc_init(mmc)) { |
| printf("%s: could not find mmc device #%d!\n", |
| __func__, dev); |
| return -ENODEV; |
| } |
| |
| blk_dev = &mmc->block_dev; |
| if (get_partition_info(blk_dev, part, &partinfo) != 0) { |
| printf("%s: could not find partition #%d on mmc device #%d!\n", |
| __func__, part, dev); |
| return -ENODEV; |
| } |
| |
| dfu->data.mmc.lba_start = partinfo.start; |
| dfu->data.mmc.lba_size = partinfo.size; |
| dfu->data.mmc.lba_blk_size = partinfo.blksz; |
| |
| } else { |
| printf("%s: Memory layout (%s) not supported!\n", __func__, st); |
| return -ENODEV; |
| } |
| |
| if (dfu->layout == DFU_FS_EXT4 || dfu->layout == DFU_FS_FAT) { |
| dfu->data.mmc.dev = simple_strtoul(s, &s, 10); |
| dfu->data.mmc.part = simple_strtoul(++s, &s, 10); |
| } |
| |
| dfu->read_medium = dfu_read_medium_mmc; |
| dfu->write_medium = dfu_write_medium_mmc; |
| dfu->flush_medium = dfu_flush_medium_mmc; |
| |
| /* initial state */ |
| dfu->inited = 0; |
| |
| return 0; |
| } |