| /* |
| * (C) Copyright 2001 |
| * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * flash.c - flash support for the 512k, 8bit boot flash on the GEVB |
| * most of this file was based on the existing U-Boot |
| * flash drivers. |
| */ |
| |
| #include <common.h> |
| #include <mpc8xx.h> |
| #include <galileo/gt64260R.h> |
| #include <galileo/memory.h> |
| #include "intel_flash.h" |
| |
| #define FLASH_ROM 0xFFFD /* unknown flash type */ |
| #define FLASH_RAM 0xFFFE /* unknown flash type */ |
| #define FLASH_MAN_UNKNOWN 0xFFFF0000 |
| |
| /* #define DEBUG */ |
| /* #define FLASH_ID_OVERRIDE */ /* Hack to set type to 040B if ROM emulator is installed. |
| * Can be used to program a ROM in circuit if a programmer |
| * is not available by swapping the rom out. */ |
| |
| /* Intel flash commands */ |
| int flash_erase_intel(flash_info_t *info, int s_first, int s_last); |
| int write_word_intel(bank_addr_t addr, bank_word_t value); |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| static ulong flash_get_size (int portwidth, vu_long *addr, flash_info_t *info); |
| static int write_word (flash_info_t *info, ulong dest, ulong data); |
| static void flash_get_offsets (ulong base, flash_info_t *info); |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long |
| flash_init (void) |
| { |
| unsigned int i; |
| unsigned long size_b0 = 0, size_b1 = 0; |
| unsigned long base, flash_size; |
| |
| /* Init: no FLASHes known */ |
| for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| } |
| |
| /* the boot flash */ |
| base = CONFIG_SYS_FLASH_BASE; |
| #ifndef CONFIG_SYS_BOOT_FLASH_WIDTH |
| #define CONFIG_SYS_BOOT_FLASH_WIDTH 1 |
| #endif |
| size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base, |
| &flash_info[0]); |
| |
| #ifndef CONFIG_P3G4 |
| printf("["); |
| print_size (size_b0, ""); |
| printf("@%08lX] ", base); |
| #endif |
| |
| if (flash_info[0].flash_id == FLASH_UNKNOWN) { |
| printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", |
| base, size_b0, size_b0<<20); |
| } |
| |
| base = memoryGetDeviceBaseAddress(CONFIG_SYS_EXTRA_FLASH_DEVICE); |
| for(i=1;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) { |
| unsigned long size = flash_get_size(CONFIG_SYS_EXTRA_FLASH_WIDTH, (vu_long *)base, &flash_info[i]); |
| |
| #ifndef CONFIG_P3G4 |
| printf("["); |
| print_size (size, ""); |
| printf("@%08lX] ", base); |
| #endif |
| |
| if (flash_info[i].flash_id == FLASH_UNKNOWN) { |
| if(i==1) { |
| printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", |
| base, size_b1, size_b1<<20); |
| } |
| break; |
| } |
| size_b1+=size; |
| base+=size; |
| } |
| |
| #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE |
| /* monitor protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_SYS_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, |
| flash_get_info(CONFIG_SYS_MONITOR_BASE)); |
| #endif |
| |
| #ifdef CONFIG_ENV_IS_IN_FLASH |
| /* ENV protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, |
| flash_get_info(CONFIG_ENV_ADDR)); |
| #endif |
| |
| flash_size = size_b0 + size_b1; |
| return flash_size; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| static void |
| flash_get_offsets (ulong base, flash_info_t *info) |
| { |
| int i; |
| int sector_size; |
| |
| if(!info->sector_count) return; |
| |
| /* set up sector start address table */ |
| switch(info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AM040: |
| case FLASH_28F128J3A: |
| case FLASH_28F640J3A: |
| case FLASH_RAM: |
| /* this chip has uniformly spaced sectors */ |
| sector_size=info->size/info->sector_count; |
| for (i = 0; i < info->sector_count; i++) |
| info->start[i] = base + (i * sector_size); |
| break; |
| default: |
| if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00008000; |
| info->start[2] = base + 0x0000C000; |
| info->start[3] = base + 0x00010000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00020000) - 0x00060000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00008000; |
| info->start[i--] = base + info->size - 0x0000C000; |
| info->start[i--] = base + info->size - 0x00010000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00020000; |
| } |
| } |
| } |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| flash_info_t *flash_get_info(ulong base) |
| { |
| int i; |
| flash_info_t * info; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) { |
| info = & flash_info[i]; |
| if (info->start[0] <= base && base <= info->start[0] + info->size - 1) |
| break; |
| } |
| |
| return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void |
| flash_print_info (flash_info_t *info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_AMD: printf ("AMD "); break; |
| case FLASH_MAN_FUJ: printf ("FUJITSU "); break; |
| case FLASH_MAN_INTEL: printf ("INTEL "); break; |
| default: printf ("Unknown Vendor "); break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AM040: |
| printf ("AM29LV040B (4 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM400B: |
| printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM400T: |
| printf ("AM29LV400T (4 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM800B: |
| printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM800T: |
| printf ("AM29LV800T (8 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM160B: |
| printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM160T: |
| printf ("AM29LV160T (16 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM320B: |
| printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM320T: |
| printf ("AM29LV320T (32 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_28F640J3A: |
| printf ("28F640J3A (64 Mbit)\n"); |
| break; |
| case FLASH_28F128J3A: |
| printf ("28F128J3A (128 Mbit)\n"); |
| break; |
| case FLASH_ROM: |
| printf ("ROM\n"); |
| break; |
| case FLASH_RAM: |
| printf ("RAM\n"); |
| break; |
| default: |
| printf ("Unknown Chip Type\n"); |
| break; |
| } |
| |
| puts (" Size: "); |
| print_size (info->size, ""); |
| printf (" in %d Sectors\n", info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| for (i=0; i<info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s", |
| info->start[i], |
| info->protect[i] ? " (RO)" : " " |
| ); |
| } |
| printf ("\n"); |
| return; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| |
| static inline void flash_cmd(int width, volatile unsigned char *addr, int offset, unsigned char cmd) |
| { |
| /* supports 1x8, 1x16, and 2x16 */ |
| /* 2x8 and 4x8 are not supported */ |
| if(width==4) { |
| /* assuming chips are in 16 bit mode */ |
| /* 2x16 */ |
| unsigned long cmd32=(cmd<<16)|cmd; |
| *(volatile unsigned long *)(addr+offset*2)=cmd32; |
| } else if (width == 2) { |
| /* 1x16 */ |
| *(volatile unsigned short *)((unsigned short*)addr+offset)=cmd; |
| } else { |
| /* 1x8 */ |
| *(volatile unsigned char *)(addr+offset)=cmd; |
| } |
| } |
| |
| static ulong |
| flash_get_size (int portwidth, vu_long *addr, flash_info_t *info) |
| { |
| short i; |
| volatile unsigned char *caddr = (unsigned char *)addr; |
| volatile unsigned short *saddr = (unsigned short *)addr; |
| volatile unsigned long *laddr = (unsigned long *)addr; |
| char old[2], save; |
| ulong id, manu, base = (ulong)addr; |
| |
| info->portwidth=portwidth; |
| |
| save = *caddr; |
| |
| flash_cmd(portwidth,caddr,0,0xf0); |
| flash_cmd(portwidth,caddr,0,0xf0); |
| |
| udelay(10); |
| |
| old[0] = caddr[0]; |
| old[1] = caddr[1]; |
| |
| |
| if(old[0]!=0xf0) { |
| flash_cmd(portwidth,caddr,0,0xf0); |
| flash_cmd(portwidth,caddr,0,0xf0); |
| |
| udelay(10); |
| |
| if(*caddr==0xf0) { |
| /* this area is ROM */ |
| *caddr=save; |
| #ifndef FLASH_ID_OVERRIDE |
| info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN; |
| info->sector_count = 8; |
| info->size = 0x80000; |
| #else |
| info->flash_id = FLASH_MAN_AMD + FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x80000; |
| info->chipwidth=1; |
| #endif |
| flash_get_offsets(base, info); |
| return info->size; |
| } |
| } else { |
| *caddr=0; |
| |
| udelay(10); |
| |
| if(*caddr==0) { |
| /* this area is RAM */ |
| *caddr=save; |
| info->flash_id = FLASH_RAM + FLASH_MAN_UNKNOWN; |
| info->sector_count = 8; |
| info->size = 0x80000; |
| flash_get_offsets(base, info); |
| return info->size; |
| } |
| flash_cmd(portwidth,caddr,0,0xf0); |
| |
| udelay(10); |
| } |
| |
| /* Write auto select command: read Manufacturer ID */ |
| flash_cmd(portwidth,caddr,0x555,0xAA); |
| flash_cmd(portwidth,caddr,0x2AA,0x55); |
| flash_cmd(portwidth,caddr,0x555,0x90); |
| |
| udelay(10); |
| |
| if ((caddr[0] == old[0]) && |
| (caddr[1] == old[1])) { |
| |
| /* this area is ROM */ |
| #ifndef FLASH_ID_OVERRIDE |
| info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN; |
| info->sector_count = 8; |
| info->size = 0x80000; |
| #else |
| info->flash_id = FLASH_MAN_AMD + FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x80000; |
| info->chipwidth=1; |
| #endif |
| flash_get_offsets(base, info); |
| return info->size; |
| #ifdef DEBUG |
| } else { |
| printf("%px%d: %02x:%02x -> %02x:%02x\n", |
| caddr, portwidth, old[0], old[1], |
| caddr[0], caddr[1]); |
| #endif |
| } |
| |
| switch(portwidth) { |
| case 1: |
| manu = caddr[0]; |
| manu |= manu<<16; |
| id = caddr[1]; |
| break; |
| case 2: |
| manu = saddr[0]; |
| manu |= manu<<16; |
| id = saddr[1]; |
| id |= id<<16; |
| break; |
| case 4: |
| manu = laddr[0]; |
| id = laddr[1]; |
| break; |
| default: |
| id = manu = -1; |
| break; |
| } |
| |
| #ifdef DEBUG |
| printf("\n%08lx:%08lx:%08lx\n", base, manu, id); |
| printf("%08lx %08lx %08lx %08lx\n", |
| laddr[0],laddr[1],laddr[2],laddr[3]); |
| #endif |
| |
| switch (manu) { |
| case AMD_MANUFACT: |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| case FUJ_MANUFACT: |
| info->flash_id = FLASH_MAN_FUJ; |
| break; |
| case INTEL_MANUFACT: |
| info->flash_id = FLASH_MAN_INTEL; |
| break; |
| default: |
| printf("Unknown Mfr [%08lx]:%08lx\n", manu, id); |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| switch (id) { |
| case AMD_ID_LV400T: |
| info->flash_id += FLASH_AM400T; |
| info->sector_count = 11; |
| info->size = 0x00100000; |
| info->chipwidth=1; |
| break; /* => 1 MB */ |
| |
| case AMD_ID_LV400B: |
| info->flash_id += FLASH_AM400B; |
| info->sector_count = 11; |
| info->size = 0x00100000; |
| info->chipwidth=1; |
| break; /* => 1 MB */ |
| |
| case AMD_ID_LV800T: |
| info->flash_id += FLASH_AM800T; |
| info->sector_count = 19; |
| info->size = 0x00200000; |
| info->chipwidth=1; |
| break; /* => 2 MB */ |
| |
| case AMD_ID_LV800B: |
| info->flash_id += FLASH_AM800B; |
| info->sector_count = 19; |
| info->size = 0x00200000; |
| info->chipwidth=1; |
| break; /* => 2 MB */ |
| |
| case AMD_ID_LV160T: |
| info->flash_id += FLASH_AM160T; |
| info->sector_count = 35; |
| info->size = 0x00400000; |
| info->chipwidth=1; |
| break; /* => 4 MB */ |
| |
| case AMD_ID_LV160B: |
| info->flash_id += FLASH_AM160B; |
| info->sector_count = 35; |
| info->size = 0x00400000; |
| info->chipwidth=1; |
| break; /* => 4 MB */ |
| #if 0 /* enable when device IDs are available */ |
| case AMD_ID_LV320T: |
| info->flash_id += FLASH_AM320T; |
| info->sector_count = 67; |
| info->size = 0x00800000; |
| break; /* => 8 MB */ |
| |
| case AMD_ID_LV320B: |
| info->flash_id += FLASH_AM320B; |
| info->sector_count = 67; |
| info->size = 0x00800000; |
| break; /* => 8 MB */ |
| #endif |
| case AMD_ID_LV040B: |
| info->flash_id += FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x80000; |
| info->chipwidth=1; |
| break; |
| |
| case INTEL_ID_28F640J3A: |
| info->flash_id += FLASH_28F640J3A; |
| info->sector_count = 64; |
| info->size = 128*1024 * 64; /* 128kbytes x 64 blocks */ |
| info->chipwidth=2; |
| if(portwidth==4) info->size*=2; /* 2x16 */ |
| break; |
| |
| case INTEL_ID_28F128J3A: |
| info->flash_id += FLASH_28F128J3A; |
| info->sector_count = 128; |
| info->size = 128*1024 * 128; /* 128kbytes x 128 blocks */ |
| info->chipwidth=2; |
| if(portwidth==4) info->size*=2; /* 2x16 */ |
| break; |
| |
| default: |
| printf("Unknown id %lx:[%lx]\n", manu, id); |
| info->flash_id = FLASH_UNKNOWN; |
| info->chipwidth=1; |
| return (0); /* => no or unknown flash */ |
| |
| } |
| |
| flash_get_offsets(base, info); |
| |
| #if 0 |
| /* set up sector start address table */ |
| if (info->flash_id & FLASH_AM040) { |
| /* this chip has uniformly spaced sectors */ |
| for (i = 0; i < info->sector_count; i++) |
| info->start[i] = base + (i * 0x00010000); |
| |
| } else if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00008000; |
| info->start[2] = base + 0x0000C000; |
| info->start[3] = base + 0x00010000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00020000) - 0x00060000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00008000; |
| info->start[i--] = base + info->size - 0x0000C000; |
| info->start[i--] = base + info->size - 0x00010000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00020000; |
| } |
| } |
| #endif |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) { |
| /* read sector protection at sector address, (A7 .. A0)=0x02 */ |
| /* D0 = 1 if protected */ |
| caddr = (volatile unsigned char *)(info->start[i]); |
| saddr = (volatile unsigned short *)(info->start[i]); |
| laddr = (volatile unsigned long *)(info->start[i]); |
| if(portwidth==1) |
| info->protect[i] = caddr[2] & 1; |
| else if(portwidth==2) |
| info->protect[i] = saddr[2] & 1; |
| else |
| info->protect[i] = laddr[2] & 1; |
| } |
| |
| /* |
| * Prevent writes to uninitialized FLASH. |
| */ |
| if (info->flash_id != FLASH_UNKNOWN) { |
| caddr = (volatile unsigned char *)info->start[0]; |
| |
| flash_cmd(portwidth,caddr,0,0xF0); /* reset bank */ |
| } |
| |
| return (info->size); |
| } |
| |
| /* TODO: 2x16 unsupported */ |
| int |
| flash_erase (flash_info_t *info, int s_first, int s_last) |
| { |
| volatile unsigned char *addr = (uchar *)(info->start[0]); |
| int flag, prot, sect, l_sect; |
| ulong start, now, last; |
| |
| /* TODO: 2x16 unsupported */ |
| if(info->portwidth==4) return 1; |
| |
| if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1; |
| if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) { |
| for (sect = s_first; sect<=s_last; sect++) { |
| int sector_size=info->size/info->sector_count; |
| addr = (uchar *)(info->start[sect]); |
| memset((void *)addr, 0, sector_size); |
| } |
| return 0; |
| } |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| if ((info->flash_id&FLASH_VENDMASK) == FLASH_MAN_INTEL) { |
| return flash_erase_intel(info, |
| (unsigned short)s_first, |
| (unsigned short)s_last); |
| } |
| |
| #if 0 |
| if ((info->flash_id == FLASH_UNKNOWN) || |
| (info->flash_id > FLASH_AMD_COMP)) { |
| printf ("Can't erase unknown flash type %08lx - aborted\n", |
| info->flash_id); |
| return 1; |
| } |
| #endif |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf ("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| } else { |
| printf ("\n"); |
| } |
| |
| l_sect = -1; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| flash_cmd(info->portwidth,addr,0x555,0xAA); |
| flash_cmd(info->portwidth,addr,0x2AA,0x55); |
| flash_cmd(info->portwidth,addr,0x555,0x80); |
| flash_cmd(info->portwidth,addr,0x555,0xAA); |
| flash_cmd(info->portwidth,addr,0x2AA,0x55); |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect<=s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| addr = (uchar *)(info->start[sect]); |
| flash_cmd(info->portwidth,addr,0,0x30); |
| l_sect = sect; |
| } |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay (1000); |
| |
| /* |
| * We wait for the last triggered sector |
| */ |
| if (l_sect < 0) |
| goto DONE; |
| |
| start = get_timer (0); |
| last = start; |
| addr = (volatile unsigned char *)(info->start[l_sect]); |
| /* broken for 2x16: TODO */ |
| while ((addr[0] & 0x80) != 0x80) { |
| if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf ("Timeout\n"); |
| return 1; |
| } |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc ('.'); |
| last = now; |
| } |
| } |
| |
| DONE: |
| /* reset to read mode */ |
| addr = (volatile unsigned char *)info->start[0]; |
| flash_cmd(info->portwidth,addr,0,0xf0); |
| flash_cmd(info->portwidth,addr,0,0xf0); |
| |
| printf (" done\n"); |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| |
| /* broken for 2x16: TODO */ |
| int |
| write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| ulong cp, wp, data; |
| int i, l, rc; |
| |
| if(info->portwidth==4) return 1; |
| |
| if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 0; |
| if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) { |
| memcpy((void *)addr, src, cnt); |
| return 0; |
| } |
| |
| wp = (addr & ~3); /* get lower word aligned address */ |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ((l = addr - wp) != 0) { |
| data = 0; |
| for (i=0, cp=wp; i<l; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| for (; i<4 && cnt>0; ++i) { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| for (; cnt==0 && i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| while (cnt >= 4) { |
| data = 0; |
| for (i=0; i<4; ++i) { |
| data = (data << 8) | *src++; |
| } |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| cnt -= 4; |
| } |
| |
| if (cnt == 0) { |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| return (write_word(info, wp, data)); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| /* broken for 2x16: TODO */ |
| static int |
| write_word (flash_info_t *info, ulong dest, ulong data) |
| { |
| volatile unsigned char *addr = (uchar *)(info->start[0]); |
| ulong start; |
| int flag, i; |
| |
| if(info->portwidth==4) return 1; |
| |
| if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1; |
| if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) { |
| *(unsigned long *)dest=data; |
| return 0; |
| } |
| if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { |
| unsigned short low = data & 0xffff; |
| unsigned short hi = (data >> 16) & 0xffff; |
| int ret = write_word_intel((bank_addr_t)dest, hi); |
| |
| if (!ret) ret = write_word_intel((bank_addr_t)(dest+2), low); |
| |
| return ret; |
| } |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*((vu_long *)dest) & data) != data) { |
| return (2); |
| } |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| /* first, perform an unlock bypass command to speed up flash writes */ |
| addr[0x555] = 0xAA; |
| addr[0x2AA] = 0x55; |
| addr[0x555] = 0x20; |
| |
| /* write each byte out */ |
| for (i = 0; i < 4; i++) { |
| char *data_ch = (char *)&data; |
| addr[0] = 0xA0; |
| *(((char *)dest)+i) = data_ch[i]; |
| udelay(10); /* XXX */ |
| } |
| |
| /* we're done, now do an unlock bypass reset */ |
| addr[0] = 0x90; |
| addr[0] = 0x00; |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* data polling for D7 */ |
| start = get_timer (0); |
| while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
| return (1); |
| } |
| } |
| return (0); |
| } |